RABELITTO Automatic Cat Feeder User Manual

1. Introduction

Thank you for choosing the RABELITTO Automatic Cat Feeder. This device is designed to provide scheduled meals for your pet, ensuring they are fed consistently even when you are away. Featuring four compartments and a timer function, it offers convenience and peace of mind. Please read this manual thoroughly before use to ensure proper operation and maintenance.

2. Safety Information

• Always place the feeder on a stable, level surface to prevent tipping.
• Keep the feeder away from direct sunlight and heat sources.
• This product is intended for indoor use only.
• Do not immerse the electronic components in water. Refer to cleaning instructions for proper care.
• Keep out of reach of small children and pets when not in use or during setup.
• Use only the recommended battery type and ensure correct polarity during installation.
• Regularly inspect the feeder for any damage or wear. Discontinue use if damaged.

3. Package Contents

Please check the package contents to ensure all items are present:

• RABELITTO Automatic Cat Feeder Unit
• Lid
• Ice Crystal Boxes (2 complimentary)
• User Manual (this document)

4. Product Features

• 4-Meal Timed Feeding: Schedule up to four meals per day, customizable to your pet's needs.
• Food Preservation Function: Includes two ice crystal boxes to help keep food fresh.
• Paws Anti-Pinch Design: Equipped with a sensor function to prevent paws from getting caught.
• Cordless Battery Power: Operates on batteries for flexible placement anywhere in your home.
• Easy to Use: Simple programming, easy disassembly, and cleaning.

5. Setup Guide

1. 5.1 Battery Installation

   The feeder requires batteries for operation (not included). Locate the battery compartment on the underside of the unit. Insert the required batteries, ensuring correct polarity (+/-) as indicated inside the compartment. Close the battery cover securely.

2. 5.2 Prepare Ice Crystal Boxes (Optional)

   For optimal food freshness, place the two complimentary ice crystal boxes in a freezer for several hours until completely frozen. Once frozen, place them into the designated slots beneath the food tray.

3. 5.3 Fill Food Compartments

   Open the lid of the feeder. Fill each of the four compartments with your pet's dry or wet food. Ensure not to overfill, allowing the lid to close and rotate freely. The feeder is suitable for dry food, wet food, and multiple pets.

   

   Image: Top-down view of the RABELITTO Automatic Cat Feeder, showing the black cat-shaped design with a digital display and one compartment filled with pet food. This illustrates how food is placed into the feeder.

4. 5.4 Initial Power On

   Once batteries are installed, the display should light up. If not, check battery orientation or replace batteries. The feeder is now ready for programming.

6. Operating Instructions

1. 6.1 Setting the Current Time

   Refer to the digital display and control buttons (usually labeled with icons like a clock, lock, plus, minus, or gear). Press the 'Set' or 'Clock' button to enter time setting mode. Use the '+' and '-' buttons to adjust the hour and minute. Press 'Set' again to confirm and move to the next setting, or to exit.

2. 6.2 Programming Meal Times (Up to 4 Meals)

   Step 1: Enter Program Mode. Press the 'Program' or 'Meal' button. The display will show "Meal 1" or similar.

   Step 2: Set Meal 1 Time. Use the '+' and '-' buttons to set the desired feeding time for the first meal. Press 'Program' to confirm and move to the next meal.

   Step 3: Repeat for Meals 2, 3, and 4. Follow the same procedure to set times for subsequent meals. If you only need fewer than 4 meals, simply skip setting the remaining meal times by pressing 'Program' until you exit the programming mode.

   Step 4: Exit Program Mode. Once all desired meals are set, press the 'Program' button until the display returns to the current time.

   The feeder will automatically rotate to the next available food compartment at each programmed meal time. The Paws Anti-Pinch Design sensor ensures safe operation during rotation.

3. 6.3 Manual Feeding (If Applicable)

   Some models may have a manual feed button. If present, pressing this button will dispense one meal immediately. Refer to the specific button layout on your feeder.

7. Maintenance and Cleaning

Regular cleaning ensures hygiene and extends the life of your feeder. The product is designed for easy disassembly and cleaning.

1. 7.1 Disassembly

   Carefully remove the lid and the food tray from the main unit. The food tray is typically removable for washing.

2. 7.2 Cleaning

   The food tray and lid are hand wash only. Use mild soap and water to clean these parts. Rinse thoroughly and allow them to air dry completely before reassembling. Do not wash the main unit with electronic components; wipe it clean with a damp cloth only. Ensure no water enters the battery compartment or control panel.

3. 7.3 Reassembly

   Once all parts are dry, carefully reassemble the food tray and lid onto the main unit, ensuring they are securely in place.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the purchase documentation or contact RABELITTO customer service through the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.