1. Introduction
This manual provides instructions for the PZL Voice Replacement Remote Control, model URC-R37022DA00. This remote is designed to replace original remote controls for specific TiVo DVR models, offering voice control capabilities and standard remote functions.
Package Contents:
- 1 x PZL Voice Replacement Remote Control (URC-R37022DA00)
Note: Batteries and additional instructions are not included in the package.
Image 1.1: Front and back view of the PZL Voice Replacement Remote Control.
2. Compatible Devices
This replacement remote control is compatible with the following TiVo DVR series:
- TiVo Edge
- TiVo Bolt
- TiVo Roamio Plus
- TiVo Roamio Pro Series
- TiVo Mini VOX DVR
- TiVo S6A
Image 2.1: The remote control positioned in front of a television, illustrating its intended use.
3. Setup and Battery Installation
The remote control requires 2 x AAA batteries (not included) for operation.
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert two AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
Image 3.1: Detailed view of the remote control, including its dimensions and the location of the battery compartment.
4. Pairing Instructions
To enable voice control and full functionality, the remote must be paired with your TiVo device. The device name for pairing is typically "T1Vo_S6V_Remote".
- Ensure your TiVo device is powered on and accessible.
- To activate the pairing function, press and hold the [TiVo] button (usually located at the top center) and the [Back] button simultaneously.
- Continue holding until the amber LED on the remote begins to flash slowly. This indicates the remote is in pairing mode.
- If pairing is successful, the remote's amber LED will flash quickly 5 times, then turn off.
- If the remote does not successfully pair after approximately 20 complete cycles, it will exit pairing mode and revert to IR (Infrared) mode. In IR mode, basic functions will work, but voice control will not. Repeat steps 2-4 if pairing fails.
Note: Refer to your TiVo device's user manual for specific instructions on how to initiate pairing on the TiVo side, if necessary.
5. Operating the Remote Control
The PZL Voice Replacement Remote Control offers both IR and voice control capabilities (after successful pairing).
5.1 Basic Functions (IR Mode)
In IR mode, the remote transmits signals via infrared light. Ensure a clear line of sight between the remote and your TiVo device. The remote offers a control distance of over 26 feet and a multi-angle control of more than 120 degrees.
- Power (TV Pwr): Turns your television on or off.
- Input: Changes the input source on your television.
- Volume (Vol): Adjusts the television volume.
- Mute: Mutes or unmutes the television sound.
- Channel (Ch): Changes television channels.
- Navigation Pad (Up, Down, Left, Right, OK): Navigates menus and selects options.
- Back: Returns to the previous screen or menu.
- Exit: Exits current menu or application.
- Guide: Opens the program guide.
- Play/Pause, Fast Forward, Rewind: Controls media playback.
- Number Pad (0-9): Direct channel entry.
- Netflix, On Demand: Dedicated buttons for quick access to streaming services.
5.2 Voice Control (Paired Mode)
Once successfully paired, press the dedicated [Microphone] button to activate voice commands. Speak clearly into the remote to search for content, change channels, or control your TiVo device.
Image 5.1: The remote control in use, highlighting its 26-foot long-range and 120-degree multi-angle control capabilities.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's performance degrades or the LED indicator suggests low power. Always replace both batteries with new AAA batteries of the same type.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you experience issues with your PZL Voice Replacement Remote Control, refer to the following common solutions:
- Remote Not Responding:
- Check battery orientation and ensure they are fresh. Replace if necessary.
- Ensure there is a clear line of sight between the remote and your TiVo device.
- Verify the remote is pointed directly at the TiVo device's IR receiver.
- Voice Control Not Working:
- Confirm the remote is successfully paired with your TiVo device (refer to Section 4).
- Ensure the microphone button is pressed when speaking commands.
- Speak clearly and at a moderate volume.
- Limited Functionality (e.g., only some buttons work):
- This may indicate the remote is in IR mode but not paired for full functionality. Attempt pairing again (Section 4).
- Some buttons might be specific to certain TiVo models or require specific TiVo software versions.
- Weak Signal or Intermittent Operation:
- Replace batteries with new ones.
- Reduce distance between the remote and the TiVo device.
- Remove any obstructions between the remote and the TiVo device.
If problems persist after following these steps, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | URC-R37022DA00 |
| Brand | PZL |
| Compatible Devices | TiVo Edge, Bolt, Roamio Plus & Pro Series, Mini VOX DVR, S6A |
| Special Feature | Voice Search |
| Color | Black |
| Max Number of Supported Devices | 1 |
| Item Weight | 3.84 ounces |
| Package Dimensions | 6.85 x 2.36 x 1.57 inches |
9. Customer Support
PZL is committed to providing quality products and professional after-sales service. If you have any questions regarding your order, product compatibility, or require assistance with your remote control, please contact PZL customer service directly.
Customer service representatives aim to respond within 12 hours on weekdays.
