1. Introduction
This manual provides detailed instructions for the proper installation, operation, and maintenance of the Evotech Tail Tidy for specific Ducati Multistrada V4 models. This product is designed to replace the original rear fender, offering a more compact and streamlined appearance while maintaining functionality for license plate and signal lights.
Compatibility: This Evotech Tail Tidy is compatible with Ducati Multistrada V4, V4S, V4 Pikes Peak, V4 Rally (Year 2025 onwards) and Multistrada V4 RS (Year 2026 onwards).
2. Safety Information
- Always ensure the motorcycle is stable and securely supported before beginning any installation or maintenance.
- Disconnect the motorcycle's battery before working on any electrical components to prevent short circuits or damage.
- Wear appropriate personal protective equipment, such as gloves and eye protection.
- If you are unsure about any step of the installation process, consult a qualified motorcycle technician.
- Ensure all fasteners are tightened to the manufacturer's recommended torque specifications (if available) to prevent components from loosening during operation.
- After installation, verify that all lights (brake, turn signals, license plate) are functioning correctly and are visible.
3. Package Contents
Please verify that all components listed below are present in your package before beginning installation.
- CNC-machined aluminum components (rear light mounting bracket, indicator mounts, license plate support)
- Vacuum-formed plastic under-tray
- All necessary fasteners and hardware
- License plate adapters (for varied plate hole alignments)
Figure 3.1: Overview of Evotech Tail Tidy components, including the main bracket and license plate holder assembly.
4. Installation Instructions
Follow these steps carefully to install your Evotech Tail Tidy. No bodywork modifications are required, as the unit utilizes existing mounting points.
- Prepare the Motorcycle: Park the motorcycle on a stable, level surface. Ensure the engine is off and cool. Disconnect the battery if working with electrical components.
- Remove Original Fender: Carefully remove the original rear fender assembly. This typically involves unscrewing mounting bolts and disconnecting wiring for the license plate light and turn signals. Note the routing of all cables.
- Assemble Tail Tidy Components: Attach the CNC-machined aluminum components, including the rear light mounting bracket, indicator mounts, and license plate support, as per the detailed instructions provided with the kit (or refer to the online video).
- Install Vacuum-Formed Under-tray: Position the vacuum-formed plastic under-tray for a clean, factory-like appearance. This component helps to seal the underside and protect wiring.
- Mount Tail Tidy: Secure the assembled Evotech Tail Tidy to the motorcycle using the existing mounting points. Use the supplied fasteners. Ensure all connections are snug but do not overtighten.
- Connect Electrical Components: Re-use your original license plate light and signal lights. Connect them to the appropriate mounts on the new tail tidy. The design is plug-and-play, meaning it should integrate seamlessly with your motorcycle's existing wiring harness.
- Install License Plate: Attach your license plate to the support. If the plate locating holes do not line up with the tail tidy's mounts, use the included license plate adapters.
- Final Checks: Reconnect the motorcycle battery. Test all lights (brake, turn signals, license plate) to ensure they are functioning correctly. Verify that the rear radar system (if equipped) is still fully operational. Double-check all fasteners for tightness.
Important: An easy-to-follow installation video can be downloaded from the manufacturer's website for visual guidance. It is highly recommended to watch this video before or during installation.
Figure 4.1: Assembled Evotech Tail Tidy, ready for installation or showing its sleek profile once installed.
5. Operation
Once correctly installed, the Evotech Tail Tidy operates passively as a component of your motorcycle's rear section. It securely holds your license plate and provides mounting points for your original rear light and turn signals. Ensure all lights are functioning correctly before each ride.
The rear radar system, if present on your Ducati Multistrada V4 model, remains fully operational with the tail tidy in position.
6. Maintenance
- Cleaning: Clean the tail tidy regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the powder-coated finish.
- Inspection: Periodically check all fasteners for tightness, especially after the first few rides following installation. Vibrations can sometimes cause bolts to loosen.
- Wiring: Inspect wiring connections for any signs of wear, corrosion, or damage. Ensure they remain securely connected.
- Functionality: Regularly check the functionality of your license plate light and turn signals.
7. Troubleshooting
- License Plate Holes Do Not Align: Use the included license plate adapters to adjust the mounting points for your specific license plate.
- Lights Not Functioning:
- Check all electrical connections to ensure they are secure and properly seated.
- Verify that the motorcycle's battery is properly connected and charged.
- Inspect the bulbs or LED units for damage or burnout.
- Loose Components: Re-tighten any loose fasteners. If components repeatedly loosen, consider using a thread-locking compound (e.g., Loctite blue) on the threads, ensuring it is suitable for the materials involved.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Evotech Performance |
| Model Number | PRN017066-017780-01 |
| Material | CNC-machined Aluminum |
| Exterior Finish | Powder Coated (Black) |
| Item Weight | 3 Pounds (approx.) |
| Fit Type | Vehicle Specific Fit |
| Compatible Vehicle Type | Motorcycle (Ducati Multistrada V4 Series) |
| Auto Part Position | Rear |
9. Warranty and Support
Warranty: This product comes with a 1-year manufacturer's warranty. Please retain your proof of purchase for warranty claims.
Customer Support: For technical assistance, installation queries, or warranty claims, please contact Evotech Performance directly through their official website. If you are unsure about the compatibility of this item with your specific Ducati Multistrada V4 model, please contact the manufacturer with your model and year for verification.
Note: For insurance purposes, a signature may be required upon delivery if the package contents amount to $250 or above.
