Golden Lighting 1140-1W BLK-HWG Samara 1-Light Wall Sconce Instruction Manual

1. Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.

Read all instructions carefully before beginning installation.
All wiring must be in accordance with national and local electrical codes.
Ensure the mounting surface can support the weight of the fixture.
Do not exceed the maximum wattage specified for the bulb.
Keep flammable materials away from the light fixture.
This fixture is intended for indoor use only.

2. Package Contents

Verify that all components are present before beginning installation. If any parts are missing or damaged, contact customer support.

Wall Sconce Fixture (1)
Mounting Plate (1)
Mounting Screws (2)
Wire Connectors (3)
Decorative Nuts (2)
Glass Shade (1)
Instruction Manual (1)

Golden Lighting Samara 1-Light Wall Sconce with clear glass shade and matte black finish

Figure 1: Golden Lighting Samara 1-Light Wall Sconce. This image shows the complete wall sconce with its clear, organic-shaped glass shade, matte black metal base, and a single candelabra-style bulb.

3. Installation Instructions

3.1 Tools Required (Not Included)

Phillips Head Screwdriver
Flat Head Screwdriver
Wire Strippers
Electrical Tape
Safety Glasses

3.2 Pre-Installation

Turn off power at the circuit breaker or fuse box to avoid electrical shock.
Carefully unpack the fixture and its components. Keep the packaging until you are sure all parts are present and the fixture is working correctly.
Review the wiring diagram and ensure you understand the installation steps.

3.3 Mounting the Fixture

Attach the mounting plate to the junction box using the provided mounting screws. Ensure the plate is securely fastened.
Pull the electrical wires from the junction box through the center hole of the mounting plate.

Close-up of Golden Lighting Samara wall sconce base and bulb socket

Figure 2: Close-up of the sconce's base. This image highlights the matte black finish of the fixture's base and the candelabra-style bulb socket, showing where the bulb is inserted.

3.4 Wiring Connections

Connect the wires according to the following diagram. If your junction box wires are different colors, consult a qualified electrician.

Black (Hot) Wire: Connect the black wire from the fixture to the black (or red) wire from the junction box using a wire connector.
White (Neutral) Wire: Connect the white wire from the fixture to the white wire from the junction box using a wire connector.
Ground Wire: Connect the bare copper or green wire from the fixture to the bare copper or green ground wire from the junction box. Secure the ground wire to the mounting plate's ground screw if available.

After making connections, carefully tuck all wires into the junction box.

3.5 Securing the Fixture and Installing Bulb/Shade

Align the fixture's base with the mounting plate and secure it using the decorative nuts.
Install one (1) candelabra (E12) base bulb (not included) into the socket. Do not exceed 60 watts.
Carefully place the glass shade over the bulb and secure it according to the fixture design (typically by tightening a retaining ring or screws).
Restore power at the circuit breaker and test the fixture.

4. Operating Instructions

The Golden Lighting Samara Wall Sconce is operated via a standard wall switch (not included) connected to the electrical circuit. Simply toggle the wall switch to turn the light fixture ON or OFF.

Bulb Type: This fixture requires one (1) candelabra (E12) base bulb. Maximum wattage is 60 watts. LED equivalent bulbs are recommended for energy efficiency and longer lifespan.

5. Maintenance

5.1 Cleaning

Always disconnect power before cleaning.
Wipe the fixture with a soft, dry cloth.
Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
For glass components, a mild glass cleaner can be used, applied to a cloth first, not directly to the fixture.

5.2 Bulb Replacement

Ensure power is OFF at the circuit breaker before replacing the bulb.
Allow the bulb to cool completely before touching it.
Carefully remove the glass shade if necessary.
Unscrew the old bulb counter-clockwise and screw in the new candelabra (E12) base bulb clockwise.
Replace the glass shade and restore power.

6. Troubleshooting

Problem	Possible Cause	Solution
Light does not turn ON.	Power is off at the circuit breaker. Loose wire connections. Defective bulb. Faulty wall switch.	Check the circuit breaker and ensure power is ON. Turn off power, check all wire connections, and re-secure them. Replace the bulb with a new one. Consult a qualified electrician to inspect the switch.
Light flickers.	Loose bulb. Loose wire connections. Incorrect bulb type/wattage.	Tighten the bulb securely. Turn off power, check and tighten all wire connections. Ensure the bulb is the correct type (E12) and does not exceed 60 watts.
Fixture hums.	Incompatible dimmer switch. Loose wiring.	If using a dimmer, ensure it is compatible with LED bulbs (if using LED) and the fixture. Turn off power, check and tighten all wire connections.

7. Specifications

Model Number:	1140-1W BLK-HWG
Product Dimensions:	10.16 x 20.32 x 25.4 cm (4 x 8 x 10 inches)
Item Weight:	1.2 kg (2.64 Pounds)
Number of Lights:	1
Voltage:	120 Volts
Max Wattage:	60 watts
Bulb Base:	E12 (Candelabra)
Finish Color:	Matte Black

8. Warranty and Support

For warranty information or technical support, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt as proof of purchase.

Golden Lighting Customer Service: Please visit www.goldenlighting.com for contact details and further assistance.