Jocoevol Twin Over Twin Metal Bunk Bed Instruction Manual

1. Important Safety Information

Read all instructions carefully before assembly and use. Keep this manual for future reference.

• Weight Capacity: Do not exceed the maximum weight capacity. The upper bed supports up to 330 pounds, and the lower bed supports up to 440 pounds.
• Anti-Tip Device: Always use the provided anti-tip device to ensure the bed's stability and prevent accidental tipping.
• Guardrails: The upper bunk is equipped with 16.5-inch high guardrails for safety. Ensure they are properly installed and maintained.
• Mattress Size: Use only mattresses of the specified size (Twin) to ensure proper fit and safety.
• Sharp Edges: Exercise caution around sharp edges during assembly and use.
• Assembly: Do not fully tighten screws until all components are correctly aligned and assembled.

WARNING: Failure to follow these safety instructions could result in serious injury.

2. Product Overview

The Jocoevol Metal Bunk Bed is a versatile and space-saving furniture solution designed for various environments such as bedrooms, dormitories, or guest rooms. Constructed with a heavy-duty metal frame, it offers stability and durability. This bunk bed features a 2-in-1 convertible design, allowing it to be separated into two individual twin beds. Key features include high safety guardrails, a reversible ladder, and integrated storage options.

Figure 2.1: Overall view of the Jocoevol Twin Over Twin Metal Bunk Bed in White.

Key Features:

• 2-in-1 Convertible Design: Easily transforms from a bunk bed into two separate twin beds.
• Sturdy Metal Construction: Heavy-duty iron frame ensures stability and longevity.
• Enhanced Safety: Features 16.5-inch high guardrails on the upper bunk and rounded corners.
• Reversible Ladder: The ladder can be installed on either the left or right side to suit room layout.
• Integrated Storage: Includes a bedside storage bag and four movable hooks for convenience.
• Under-Bed Clearance: Provides 11.2 inches of space beneath the lower bed for additional storage.

3. Package Contents

Before beginning assembly, verify that all parts and hardware are present. Refer to the included installation manual for a detailed list of components and labeled accessories.

Expected Components:

• Headboard sections
• Footboard sections
• Side rails
• Bed slats
• Ladder
• Guardrails
• Support legs
• Bedside storage bag
• 4 Movable hooks
• Anti-tip device
• Hardware pack (screws, bolts, washers, Allen wrench)
• Assembly Instruction Manual

NOTE: If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

4. Setup Instructions

Assembly typically requires two adults. Follow the step-by-step instructions provided in the separate installation manual. Ensure you have adequate space for assembly.

General Assembly Steps:

1. Unpack and Identify Parts: Lay out all components and hardware. Match them against the parts list in your manual. All accessories are labeled for easy identification.
2. Assemble Bed Frames: Begin by attaching the headboard and footboard sections to the side rails for both the upper and lower beds.
3. Install Bed Slats: Secure the bed slats to the assembled frames. Ensure they are evenly spaced and firmly attached.
4. Stack Beds (for Bunk Bed configuration): Carefully lift and place the upper bed frame onto the lower bed frame, aligning the connection points.
5. Attach Guardrails: Install the safety guardrails to the upper bunk.
6. Install Ladder: Attach the ladder to either the left or right side of the bunk bed, as desired. The top of the ladder has an opening for easy access.
7. Secure Anti-Tip Device: Mount the anti-tip device to the bed frame and wall according to the manual's instructions. This is crucial for stability.
8. Final Tightening: Once all components are correctly aligned and in place, proceed to fully tighten all screws and bolts. Do not tighten screws completely until the entire structure is assembled to allow for adjustments.

Figure 4.1: The reversible ladder can be attached to either side.

Figure 4.2: Headboard and footboard prevent mattress sliding, with 11.2-inch under-bed storage.

5. Operating Instructions

5.1. Converting to Two Single Beds

The Jocoevol bunk bed can be converted into two independent twin beds. To do this:

1. Remove the ladder and any attached accessories.
2. Carefully separate the upper bunk from the lower bunk. This may require loosening some connecting bolts.
3. Reattach any necessary end caps or support legs to the now separate bed frames.

Figure 5.1: The bunk bed can be configured as two separate twin beds.

5.2. Using Storage Features

• Bedside Storage Bag: Hang the provided bedside storage bag on the guardrail of either bunk for convenient access to small items like glasses, phones, or remote controls.
• Movable Hooks: Utilize the four movable hooks to hang bags, scarves, hats, or keys on the bed frame.
• Under-Bed Storage: The 11.2-inch clearance beneath the lower bed provides ample space for storage bins, suitcases, or other items.

Figure 5.2: Bedside storage bag, movable hooks, high guardrails, and round guard corners for safety.

6. Maintenance

Regular maintenance helps ensure the longevity and safety of your bunk bed.

• Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Hardware Check: Periodically inspect all bolts and screws to ensure they remain tight. Re-tighten as necessary to prevent wobbling or noise.
• Structural Integrity: Check the bed frame for any signs of damage, bending, or stress. If any issues are found, discontinue use and contact customer support.
• Ladder and Guardrails: Ensure the ladder is securely attached and the guardrails are firm and undamaged.

7. Troubleshooting

Common Issues and Solutions:

• Bed is Wobbly:
  Solution: Ensure all bolts and screws are fully tightened. Check that the bed is placed on a level surface. Verify the anti-tip device is correctly installed and secured to the wall.
• Squeaking or Noise:
  Solution: Re-tighten all assembly hardware. Apply a small amount of lubricant (e.g., silicone spray) to connection points if noise persists. Ensure mattresses are properly seated on the slats.
• Missing Parts or Damaged Components:
  Solution: Do not attempt to assemble or use the bed. Refer to the package contents list and contact customer support immediately for replacement parts.
• Ladder Feels Unstable:
  Solution: Ensure the ladder is correctly hooked into the bed frame and all its attachment points are secure.

8. Specifications

Figure 8.1: Detailed dimensions and weight capacities of the bunk bed.

9. Warranty Information

Jocoevol products are manufactured to high-quality standards. This product comes with a limited warranty against manufacturing defects. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation included with your purchase or contact customer support.

10. Customer Support

If you have any questions, require assistance with assembly, or need replacement parts, please contact Jocoevol customer support. Our team is available to help you with any concerns regarding your product.

Please have your model number (FZZH24110401) and purchase information ready when contacting support.

For contact details, please refer to the original packaging or the official Jocoevol website.