Hama WK-300 Multi-Device Wireless Keyboard Instruction Manual

1. Introduction

Thank you for choosing the Hama WK-300 Multi-Device Wireless Keyboard. This compact office keyboard is designed for wireless control of computers, smartphones, and tablets, offering versatile connectivity via Bluetooth or a 2.4 GHz radio connection with a USB-A receiver. It allows simultaneous connection to up to three devices, providing a seamless experience for various tasks.

2. Safety Instructions

• Do not open the device or continue to operate it if it becomes damaged.
• Do not attempt to service or repair the product yourself. Leave any service work to qualified experts.
• Protect the product from dirt, moisture, and overheating, and use it only in dry environments.
• Keep this product, as all electrical products, out of the reach of children.
• Do not use the product in areas where the use of electronic devices is not permitted.
• Dispose of packaging material immediately according to locally applicable regulations.

3. Package Contents

Please check that the package contains the following items:

• 1 Hama WK-300 Multi-Device Wireless Keyboard
• 1 USB-A Receiver (typically stored in the battery compartment)
• 1 Instruction Manual

Note: AAA batteries are required for operation and are not included in the package.

4. Setup

4.1 Battery Installation

1. Locate the battery compartment on the underside of the keyboard.
2. Open the battery compartment cover.
3. Insert one AAA battery, ensuring correct polarity (+/-).
4. Close the battery compartment cover securely.

Image: Underside of the Hama WK-300 keyboard, illustrating the battery compartment and the storage slot for the USB receiver.

4.2 Connecting to Devices

The Hama WK-300 keyboard supports connection to up to three devices simultaneously via 2.4 GHz radio (channel 1) and Bluetooth (channels 2 and 3).

4.2.1 2.4 GHz Radio Connection (Channel 1)

1. Remove the USB-A receiver from its storage slot in the battery compartment.
2. Plug the USB-A receiver into a free USB port on your computer.
3. Switch the keyboard to channel 1 (usually indicated by a switch or button on the keyboard). The keyboard should automatically connect to your computer.

4.2.2 Bluetooth Connection (Channels 2 & 3)

1. Switch the keyboard to either channel 2 or channel 3.
2. Press and hold the pairing button (refer to keyboard layout for exact location, often combined with the channel switch) until the indicator light flashes, signifying pairing mode.
3. On your device (smartphone, tablet, computer), go to Bluetooth settings and search for new devices.
4. Select "Hama WK-300" from the list of available devices to complete the pairing process.

4.3 Switching Between Devices

To switch between connected devices, simply press the corresponding channel button (1, 2, or 3) on the keyboard. The keyboard will instantly connect to the selected device.

5. Operating the Keyboard

5.1 Basic Typing Functions

The Hama WK-300 features a QWERTY layout with quiet keys, ensuring a comfortable and undisturbed typing experience. Simply begin typing after connecting to your device.

Image: Top-down view of the Hama WK-300 keyboard, highlighting its 90% layout and key functions, including the Fn key for multimedia controls.

5.2 Multimedia Functions (Fn Keys)

The F keys (F1-F12) have secondary assignments for multimedia control. To activate these functions, press and hold the Fn key simultaneously with the desired F key. This allows for quick control of media playback, volume, and other system functions without navigating through system settings.

5.3 AI Assist Button

The dedicated Assist button activates a cross-program AI assistant, enhancing productivity by providing quick access to intelligent features.

5.4 Power Saving

The keyboard is battery-operated and designed for efficiency, making it ideal for mobile use. It will enter a low-power state after a period of inactivity to conserve battery life.

6. Maintenance

6.1 Cleaning the Keyboard

To clean your keyboard, ensure it is turned off and disconnected from any devices. Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. Avoid excessive moisture and abrasive cleaners. Do not immerse the keyboard in water.

6.2 Battery Replacement

When the keyboard's performance diminishes or it stops responding, it may be time to replace the AAA battery. Follow the battery installation steps outlined in Section 4.1.

7. Troubleshooting

• Keyboard not connecting: Ensure the keyboard has fresh batteries and is switched to the correct channel (1 for 2.4 GHz, 2 or 3 for Bluetooth). For Bluetooth, ensure the keyboard is in pairing mode and your device's Bluetooth is enabled. For 2.4 GHz, ensure the USB receiver is properly inserted into your device.
• Keys not responding: Check battery level. If using 2.4 GHz, try plugging the USB receiver into a different USB port. If using Bluetooth, try re-pairing the keyboard with your device.
• Intermittent connection: Ensure there are no strong interference sources nearby (e.g., other wireless devices, large metal objects). Try moving closer to your device.
• Multimedia keys not working: Ensure you are pressing the Fn key simultaneously with the desired F key.

8. Specifications

9. Warranty

The Hama WK-300 Multi-Device Wireless Keyboard comes with a 5-year warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Hama website or contact customer support.

10. Support

For further assistance, technical support, or to inquire about spare parts, please contact Hama customer service. You can find contact information on the official Hama website (www.hama.com) or through your local retailer.