DERCASS Murphy Bed with Closet (Queen Size, White) - Instruction Manual

1. Introduction

The DERCASS Murphy Bed with Closet is a space-saving furniture solution designed for bedrooms, guest rooms, or home offices. It features a queen-size bed that folds vertically into a cabinet, accompanied by an integrated wardrobe and storage shelf. This manual provides essential instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and proper use of your new furniture.

2. Safety Information

Please read and understand all safety warnings and instructions before assembling or operating this product. Failure to follow these instructions may result in serious injury or property damage.

• Adult Assembly Required: This product is heavy and complex to assemble. Assembly requires at least two adults.
• Wall Anchoring: The unit must be securely anchored to a wall stud using appropriate hardware to prevent tipping. Failure to do so can result in severe injury or death.
• Weight Capacity: Do not exceed the bed's maximum weight capacity of 600 lbs.
• Mattress Thickness: Use only a mattress with a recommended thickness of 6 inches. Using a thicker or heavier mattress may affect the hydraulic lift system's operation and safety.
• Clearance: Ensure the area around the bed is clear of obstructions before lowering or raising the bed. Keep hands and fingers clear of moving parts and pinch points during operation.
• Child Safety: Do not allow children to operate the bed mechanism unsupervised.
• Hardware Check: Regularly inspect all bolts, screws, and fasteners for tightness. Retighten as necessary to maintain structural integrity.
• Level Surface: Assemble and operate the bed on a flat, level surface.

3. Package Contents

Your DERCASS Murphy Bed with Closet is shipped in 4 separate packages. Please ensure all packages are received before beginning assembly. Carefully unpack all components and verify against the parts list provided in the separate assembly instructions.

Included Components:

• Main Bed Cabinet Boards
• Wardrobe Cabinet Boards
• Bed Frame Slats
• Hydraulic Lift System Components
• Handles
• Shelves
• Assembly Hardware (screws, bolts, connectors, wall anchoring kit)

Note: Mattress is not included.

4. Setup and Assembly

Assembly of the DERCASS Murphy Bed requires careful attention to detail and adherence to the provided step-by-step instructions. Tools for assembly are included.

1. Preparation: Clear a large, open workspace. Lay out all components and hardware. Identify each part using the assembly guide.
2. Assemble Main Cabinet: Follow the detailed diagrams to construct the primary cabinet structure that houses the bed.
3. Install Bed Frame: Attach the bed frame to the main cabinet, integrating the hydraulic lift system as instructed. Ensure all connections are secure.
4. Assemble Wardrobe Section: Construct the wardrobe cabinet, including shelves and hanging rods.
5. Attach Wardrobe to Main Unit: Connect the wardrobe section to the main bed cabinet. The wardrobe can be installed on either side.
6. Wall Anchoring: This is a critical step. Position the assembled unit against the desired wall. Locate wall studs and securely anchor the unit using the provided wall anchoring kit. This prevents the unit from tipping over.
7. Final Touches: Install handles on all doors and drawers. Place the mattress (not included) onto the bed frame.

Refer to the separate, detailed assembly manual for specific diagrams and step-by-step instructions for each component.

Figure 4.1: Dimensions of the Murphy Bed with Closet (Bed Extended)

Figure 4.2: Dimensions of the Murphy Bed with Closet (Bed Folded)

5. Operating Instructions

The DERCASS Murphy Bed features a hydraulic lift system for smooth and easy operation.

5.1. Lowering the Bed

1. Ensure the area in front of the cabinet is completely clear of furniture, rugs, or other obstructions.
2. Gently grasp the bed frame handle (if applicable) or the bottom edge of the bed panel.
3. Pull the bed frame downwards. The hydraulic lift system will assist in a controlled lowering of the bed until it rests on its support legs.
4. Confirm the bed is fully extended and stable before use.

Figure 5.1: Murphy Bed in Extended Position with Closet Open

Figure 5.2: Side View of Murphy Bed in Extended Position

5.2. Raising the Bed

1. Remove all bedding, pillows, and any other items from the bed surface.
2. Grasp the bed frame handle or the bottom edge of the bed panel.
3. Lift the bed frame upwards. The hydraulic lift system will assist in raising the bed smoothly back into the cabinet.
4. Ensure the bed is fully retracted and securely latched (if applicable) into the cabinet.

Figure 5.3: Murphy Bed in Folded Position with Closet Open

Figure 5.4: Murphy Bed in Fully Closed Cabinet Position

5.3. Using the Closet and Storage

The integrated closet provides additional storage. Open the closet doors to access the shelves and hanging rods. The small built-in storage shelf on the bed unit can be used for small items when the bed is closed.

Figure 5.5: Detail of Internal Closet Shelving

Figure 5.6: Cabinet Handle Detail

6. Maintenance

Proper maintenance ensures the longevity and safe operation of your Murphy Bed.

• Cleaning: Wipe all surfaces with a dry, soft cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, which can damage the finish.
• Hardware Inspection: Periodically check all assembly hardware (bolts, screws, connectors) for tightness. Retighten any loose fasteners to prevent instability.
• Hydraulic System: The hydraulic lift system is designed for maintenance-free operation. Do not attempt to lubricate or disassemble the hydraulic pistons unless specifically instructed by DERCASS customer support.
• Moving the Unit: If you need to move the unit, ensure the bed is in the fully closed position. It is recommended to disassemble the unit partially or entirely for safe relocation, especially if moving it a significant distance. Always use proper lifting techniques and assistance.

7. Troubleshooting

If you encounter issues with your DERCASS Murphy Bed, refer to the following common problems and solutions:

• Bed does not lower or raise smoothly:
  • Check for any obstructions around the bed frame or within the cabinet.
  • Ensure the mattress is the correct size and thickness (6 inches recommended) and not excessively heavy.
  • Verify that the hydraulic lift system components are correctly installed and not damaged. If issues persist, contact customer support.
• Unit feels unstable or wobbly:
  • Confirm that the unit is securely anchored to a wall stud. Re-check wall anchoring points.
  • Inspect all assembly bolts and screws. Tighten any loose fasteners.
  • Ensure the unit is placed on a level surface.
• Missing parts or damaged components:
  • Review the package contents list and assembly manual to identify the missing or damaged part.
  • Contact DERCASS customer support with details of the missing or damaged item.

8. Specifications

9. Warranty and Support

For any questions, missing parts, or assistance with your DERCASS Murphy Bed, please contact DERCASS customer support. Refer to your purchase documentation or retailer for specific warranty details and contact information.

We are committed to providing assistance and resolving any issues you may encounter.