Introduction
This manual provides essential information for the proper use, setup, and maintenance of your Bianchi Group 4 Black AccuMold Elite Compact Light Holder. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
The Bianchi 7911 AccuMold Elite Compact Light Holder is designed to securely carry compact flashlights. It features a robust construction with a protective pouch, ensuring your equipment is safe and readily accessible.
Product Features
Figure 1: Bianchi Group 4 Black AccuMold Elite Compact Light Holder. This image displays the black tactical pouch designed to hold compact flashlights, featuring two main compartments with flap closures. The pouch is made of durable ballistic weave material, suitable for duty belts.
- Versatile Carry: Supports both vertical and horizontal carry configurations.
- Durable Construction: Features AccuMold Trilaminate construction with a ballistic weave exterior and Coptex lining for enhanced durability and protection.
- Expandable Cavities: Pouch cavities are designed to expand both front and rear, maintaining a sleek and trim appearance while accommodating various light sizes.
- Precise Fit: Contoured molding ensures a long-lasting shape and a precise fit for compact lights.
- Belt Compatibility: Equipped with an injected molded belt loop that securely fits 2.25" (58mm) duty belt widths.
Setup and Installation
- Prepare Your Belt: Ensure your duty belt is clean and free of obstructions. The Bianchi Group 4 Black AccuMold Elite Compact Light Holder is designed for 2.25" (58mm) duty belts.
- Attach the Holder: Slide the injected molded belt loop of the light holder onto your duty belt. Position it comfortably and securely where you intend to carry your flashlight.
- Secure the Snaps: If your model features snaps, ensure they are fully engaged to prevent accidental detachment. Snaps may be chrome, brass, or hidden depending on the specific product variant.
- Insert Flashlights: Gently insert your compact flashlights into the pouch cavities. The expandable design will accommodate most compact lights from brands like Streamlight and Surefire.
- Close Flaps: Secure the protective flaps over the flashlights to ensure they are held firmly in place and protected from elements.
Operation
The Bianchi AccuMold Elite Compact Light Holder is designed for straightforward operation, providing quick access to your compact flashlights.
- Accessing Flashlights: To retrieve a flashlight, simply unfasten the flap closure and pull the flashlight from the pouch.
- Re-holstering: After use, return the flashlight to the pouch and secure the flap to ensure it remains protected and in place.
- Carry Orientation: The holder can be worn vertically or horizontally on your belt, depending on your preference and operational needs. Adjust the position on your belt for optimal comfort and accessibility.
Maintenance
Proper maintenance will extend the life and preserve the appearance of your Bianchi AccuMold Elite Compact Light Holder.
- Cleaning: Wipe the exterior with a damp cloth and mild soap if necessary. Avoid harsh chemicals or abrasive cleaners, as these can damage the ballistic weave material and Coptex lining.
- Drying: Allow the holder to air dry completely before storing or re-using. Do not expose to direct heat sources.
- Storage: Store the holder in a cool, dry place away from direct sunlight when not in use.
- Inspection: Periodically inspect the belt loop, stitching, and flap closures for any signs of wear or damage. Replace the holder if significant wear is observed to ensure secure retention of your equipment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Holder feels loose on belt. | Incorrect belt size or snaps not fully engaged. | Ensure you are using a 2.25" (58mm) duty belt. Check that all snaps are securely fastened. |
| Flashlight does not fit or is too tight. | Flashlight size exceeds pouch capacity. | Verify your flashlight is a compact model. The pouch is designed for most compact lights, but extremely large models may not fit. |
| Flap closure not securing properly. | Debris in hook-and-loop or damaged closure. | Clean any debris from the hook-and-loop fasteners. If damaged, the holder may need replacement. |
Specifications
| Model Name | Bianchi 18443: Double Mag Pouch Blk Sz 4 Hook-Loop (Note: Product functions as a compact light holder) |
| Part Number | 18443 |
| Brand | Bianchi |
| Color | Black |
| Size | Group 4 |
| Item Weight | 16 ounces |
| Number of Pockets | 1 (designed for two compact lights) |
| Closure Type | Hook (Hook-and-loop for flaps) |
| UPC | 013527184436 |
| Belt Compatibility | Fits 2.25" (58mm) duty belts |
Warranty and Support
For information regarding product warranty, returns, or technical support, please refer to the official Bianchi website or contact your authorized retailer. Standard return policies typically allow for returns within 30 days of purchase, subject to retailer terms and conditions.
For direct inquiries, you may visit the Bianchi Store on Amazon.
