Introduction
Thank you for purchasing the PELONIS 20-Inch Box Fan and 1500W Space Heater bundle. This manual provides important information regarding the safe operation, installation, maintenance, and troubleshooting of your new appliances. Please read this manual thoroughly before use and retain it for future reference.
This bundle offers year-round comfort with a powerful box fan for cooling and air circulation, and a compact ceramic space heater for efficient warmth during colder months.

An image showing the PELONIS 20-inch box fan on the left, featuring a square design with visible blades and a blue airflow effect, alongside the PELONIS 1500W ceramic space heater on the right, which is a compact black unit with control knobs on top.
Important Safety Instructions
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before using these appliances.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- Do not use outdoors.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect an appliance, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the appliance.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- An appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
- Use these appliances only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Always plug appliances directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- For the heater: This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- For the heater: Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- For the fan: Ensure the fan is placed on a stable, flat surface to prevent tipping.
Package Contents
- PELONIS 20-Inch Box Fan (1 unit)
- PELONIS 1500W Space Heater (1 unit)
- User Manual (this document)
Product Overview
PELONIS 20-Inch Box Fan
The PELONIS 20-inch box fan is designed for powerful air circulation. It features a durable 4-blade design and a protective safety grill.
- Control Knob: Used to select fan speed (OFF, Low, Medium, High).
- Front Grill: Protective cover for the fan blades.
- Rear Grill: Air intake.
- Carrying Handle: Integrated for easy portability.
PELONIS 1500W Space Heater
The PELONIS 1500W ceramic space heater provides quick and efficient heating in a compact design. It includes multiple safety features.
- Power/Mode Knob: Selects fan mode, low heat (900W), or high heat (1500W).
- Thermostat Knob: Adjusts desired room temperature.
- Power Indicator Light: Illuminates when the heater is operating.
- Air Outlet Grill: Where heated air exits.
- Tip-Over Safety Switch: Automatically shuts off the heater if it tips over.
- Carrying Handle: Integrated for easy portability.
Setup
Box Fan Setup
- Unpack the fan from its packaging.
- Place the fan on a firm, level surface. Ensure there are no obstructions to the air intake or exhaust.
- Ensure the power cord is not damaged and is positioned safely to avoid tripping hazards.
- Plug the fan directly into a 120V AC electrical outlet. Do not use extension cords.
Space Heater Setup
- Remove the heater from its packaging.
- Place the heater on a firm, level surface, ensuring it is at least 3 feet (0.9 meters) away from walls, furniture, curtains, and other combustible materials.
- Ensure the power cord is not damaged and is positioned safely to avoid tripping hazards.
- Plug the heater directly into a 120V AC, 60Hz electrical outlet. Do not use extension cords or power strips.
Operating Instructions
Box Fan Operation
- Plug the fan into a suitable electrical outlet.
- Turn the Control Knob to your desired speed setting:
- Low: For gentle airflow.
- Medium: For moderate airflow.
- High: For maximum airflow.
- To turn off the fan, rotate the Control Knob to the OFF position.
- Unplug the fan when not in use.
Space Heater Operation
- Plug the heater into a suitable electrical outlet. The Power Indicator Light will illuminate.
- Turn the Power/Mode Knob to select your desired operating mode:
- Fan Only: For cooling or air circulation without heat.
- Low Heat (900W): For moderate heating.
- High Heat (1500W): For rapid and maximum heating.
- Adjust the Thermostat Knob to your desired room temperature. The heater will cycle on and off to maintain the set temperature. Turning the knob clockwise increases the desired temperature.
- To turn off the heater, rotate the Power/Mode Knob to the OFF position.
- Unplug the heater when not in use.
Maintenance
Always unplug both appliances before cleaning or performing any maintenance.
Cleaning
- Use a soft, damp cloth to wipe the exterior surfaces of the fan and heater.
- Do not use abrasive cleaners or solvents, as these may damage the surfaces.
- For the fan, use a vacuum cleaner with a brush attachment to remove dust from the grills.
- For the heater, ensure the air intake and outlet grills are free from dust and debris.
- Ensure both appliances are completely dry before plugging them back in.
Storage
- Store the appliances in a cool, dry place when not in use.
- It is recommended to store them in their original packaging to protect them from dust and damage.
Troubleshooting
Box Fan
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate. | Not plugged in. Control knob is OFF. | Ensure plug is firmly in outlet. Turn control knob to a speed setting. |
| Weak airflow. | Low speed setting. Grills are blocked. | Increase speed setting. Clean grills and ensure no obstructions. |
Space Heater
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Not plugged in. Power/Mode knob is OFF. Tip-over switch activated. Overheat protection activated. | Ensure plug is firmly in outlet. Turn Power/Mode knob to a heat setting. Place heater on a firm, level surface. Unplug, wait 10 minutes, then plug in again. Ensure no obstructions. |
| Heater stops working unexpectedly. | Tip-over switch activated. Overheat protection activated. Thermostat reached set temperature. | Ensure heater is upright on a level surface. Unplug, wait 10 minutes, then plug in again. Ensure no obstructions. Adjust thermostat to a higher setting. |
| No heat, but fan is running. | Power/Mode knob set to "Fan Only". | Turn Power/Mode knob to "Low Heat" or "High Heat". |
If the problem persists after trying these solutions, please contact customer support.
Specifications
PELONIS 20-Inch Box Fan
- Size: 20-inch
- Speeds: 3 (Low, Medium, High)
- Blades: 4-blade design
- Power: 120V AC, 60Hz
PELONIS 1500W Space Heater
- Heating Element: PTC Ceramic
- Heat Settings: 1500W / 900W
- Fan Mode: Yes
- Coverage Area: Up to 200 sq. ft.
- Noise Level: < 50dB
- Safety Features: Tip-over protection, Overheat protection
- Power: 120V AC, 60Hz
Warranty and Support
PELONIS products are manufactured to the highest quality standards. For specific warranty information, please refer to the warranty card included with your purchase or visit the official PELONIS website. If you have any questions or require assistance, please contact PELONIS customer support.
Please note: Warranty terms and conditions may vary by region and retailer. Keep your proof of purchase for warranty claims.







