Important Safety Information
WARNING: This product contains a gas lift mechanism. Always follow the instructions for proper use and assembly to prevent injury. Be cautious of sharp edges during assembly. Do not exceed the maximum weight capacity of 264 lbs. Keep away from heat sources and open flames. Always use the chair on a stable surface.
- Ensure all screws and bolts are securely tightened before use.
- Do not stand on the chair.
- Avoid placing heavy objects on the chair that could cause instability.
- Regularly inspect the chair for loose parts or damage.
Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer service.
- Hbada P2 Ergonomic Office Chair components
- Assembly hardware kit
- Welcome guide (this manual)
Image: Fully assembled Hbada P2 Office Chair in a home office setting.
Assembly Instructions
Follow these steps carefully to assemble your Hbada P2 Office Chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Unpack Components: Carefully remove all parts from the packaging and lay them out.
- Attach Casters to Base: Insert the casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
- Insert Gas Lift: Place the gas lift cylinder into the center hole of the chair base.
- Assemble Seat Mechanism: Attach the seat mechanism to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
- Attach Armrests: Secure the armrests to the seat cushion using the designated screws.
- Connect Backrest to Seat: Attach the backrest to the seat assembly.
- Mount Seat Assembly to Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder.
- Attach Headrest: Slide the headrest into the slots at the top of the backrest.
- Final Check: Verify all connections are secure and the chair functions correctly.
Image: Diagram illustrating the key dimensions of the Hbada P2 Office Chair.
Operating Instructions
Your Hbada P2 Office Chair offers several adjustable features to customize your seating experience.
1. Seat Height Adjustment
To adjust the seat height, locate the lever on the right side beneath the seat. Pull the lever up while seated to lower the seat, or pull it up while standing to raise the seat. Release the lever at the desired height.
2. Reclining Function
The chair can recline and lock into three positions: 90° (upright), 110° (relaxed), and 135° (nap). To recline, pull the lever on the left side beneath the seat. Lean back to your desired angle and push the lever down to lock it. To return to an upright position, pull the lever up and lean forward.
Image: Illustration showing the 90°, 110°, and 135° reclining angles of the chair.
3. 3D Adjustable Lumbar Support
The lumbar support can be adjusted in height, depth, and width to conform to your lower back. Locate the adjustment controls on the backrest. Adjust the support until it provides optimal comfort and alignment for your spine.
- Height Adjustment: Push the lumbar support up or down.
- Depth Adjustment: Rotate the knob (if present) or push the support forward/backward.
- Side-to-Side Motion: The lumbar support offers 10° side-to-side motion for dynamic support.
Image: Detailed view of the 3D adjustable lumbar support, showing height, depth, and side-to-side adjustments.
4. 2D Adjustable Headrest
The headrest can be adjusted in height and swivel angle. Grasp the headrest and move it up or down to your preferred height. It also swivels 40° to provide neck support.
Image: Close-up of the 2D adjustable headrest, highlighting its height and swivel capabilities.
5. Armrest Adjustment
The armrests are height-adjustable with a 7.5 cm (approximately 3 inches) range. Locate the button or lever on the side of each armrest. Press it and move the armrest up or down to your desired height. Release the button/lever to lock it in place.
Image: View of the armrest, indicating the mechanism for height adjustment.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your Hbada P2 Office Chair.
- Cleaning:
- For mesh and fabric surfaces, use a soft cloth dampened with mild soap and water. Avoid harsh chemicals.
- For plastic and metal parts, wipe with a clean, damp cloth.
- Do not saturate the chair with water.
- Inspection: Periodically check all screws and bolts to ensure they are tight. Re-tighten if necessary.
- Casters: Keep casters clean from hair and debris to ensure smooth movement.
- Gas Lift: Do not attempt to disassemble or repair the gas lift cylinder yourself. Contact customer service if it malfunctions.
Image: Diagram illustrating the layered construction of the elastic foam seat cushion.
Troubleshooting
If you encounter any issues with your Hbada P2 Office Chair, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair does not adjust height | Gas lift malfunction or lever not engaged. | Ensure the height adjustment lever is fully engaged. If the issue persists, contact customer service. |
| Chair wobbles or is unstable | Loose screws or uneven assembly. | Check and tighten all assembly screws. Ensure the chair is on a flat, stable surface. |
| Casters do not roll smoothly | Debris caught in casters. | Clean any hair, dust, or debris from the caster wheels. |
| Backrest does not recline or lock | Recline mechanism not engaged or damaged. | Ensure the recline lever is fully engaged. If the mechanism is stuck, try gently rocking the chair while adjusting. Contact customer service if it remains unresponsive. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Hbada |
| Model Number | P2 |
| Color | White |
| Overall Height | 105.5 - 126.5 cm (41.5 - 49.8 inches) |
| Base Width | 70 cm (27.6 inches) |
| Seat Width | 51 cm (20.1 inches) |
| Seat Depth | 52 cm (20.5 inches) |
| Seat Height Range | 40 - 48 cm (15.7 - 18.9 inches) |
| Item Weight | 43 pounds |
| Back Style | Mesh Back |
| Fill Material | Memory Foam |
| Reclining Positions | 3 (90°, 110°, 135°) |
| Lumbar Support | 3D Adjustable (Height, Depth, Width, 10° Side-to-Side Motion) |
| Headrest | 2D Adjustable (Height, 40° Swivel) |
| Armrests | Height Adjustable (7.5 cm / 3 inches range) |
| Maximum Weight Capacity | 264 lbs |
Warranty and Customer Support
Your Hbada P2 Ergonomic Office Chair comes with a comprehensive warranty and dedicated customer support.
- Warranty: This product is covered by a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use.
- Returns: A 30-day free return policy is available.
- Price Match: A 15-day price match guarantee is offered.
- Customer Service: For any questions, assistance with assembly, troubleshooting, or warranty claims, please contact Hbada customer service. Refer to the welcome guide or the official Hbada website for contact details.
