1. Introduction
This manual provides comprehensive instructions for the ECONTROLLY N2QAYB000142 replacement remote control. This remote is designed to function as a direct replacement for the original remote control of compatible Panasonic CD Stereo Systems, offering seamless operation without the need for programming.
Please read this manual thoroughly before using the remote control to ensure proper setup and operation.
2. Product Overview
Figure 1: Front view of the N2QAYB000142 Remote Control. This image displays the layout of all buttons, including power, disc, number pad, volume, and various function keys.
The ECONTROLLY N2QAYB000142 is an infrared replacement remote control specifically designed for use with various Panasonic CD Stereo Systems. It is pre-programmed and ready to use directly out of the package after battery installation.
Key Features:
- Direct Replacement: Functions identically to the original Panasonic remote control.
- No Programming Required: Ready for immediate use upon battery insertion.
- Infrared Technology: Standard IR signal for reliable communication with your stereo system.
3. Compatibility
This remote control is compatible with the following Panasonic CD Stereo System models:
- SC-AK450
- SA-AK450
- SB-AK450
- SC-AK350
- SA-AK350
- SB-AK350
- SC-AK250
- SA-AK250
- SB-AK250
Please verify your stereo system's model number to ensure compatibility.
4. Setup
4.1 Battery Installation
The remote control requires two (2) AA ALKALINE batteries for operation. Batteries are not included with the remote control.
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or in the direction indicated by an arrow to open it.
- Insert two new AA ALKALINE batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Important: Do not use rechargeable batteries. Only use AA ALKALINE batteries for optimal performance and to prevent potential damage.
Figure 2: Angled view of the remote control. This perspective highlights the overall shape and button placement, useful for identifying the battery compartment on the reverse side.
5. Operating Instructions
Point the remote control directly at the infrared sensor on your Panasonic CD Stereo System. Ensure there are no obstructions between the remote and the stereo system.
5.1 Button Functions
Below is a general guide to the functions of the buttons on your N2QAYB000142 remote control. Specific functionality may vary slightly depending on your Panasonic CD Stereo System model.
| Button | Function |
|---|---|
| (Power) | Turns the stereo system on or off. |
| SLEEP - AUTO OFF | Activates or adjusts the sleep timer function. |
| CLOCK/TIMER | Sets the clock or timer functions. |
| PLAY/REC | Initiates playback or recording (if applicable). |
| DISC | Selects the CD/Disc function. |
| 1-9, 0, ≥10 | Numeric keypad for direct track selection, radio station input, or other numerical entries. |
| PROGRAM | Enters program mode for CD tracks. |
| PLAY MODE | Changes CD playback modes (e.g., random, repeat). |
| REPEAT | Repeats current track or entire disc. |
| DEL | Deletes programmed tracks or entries. |
| SPACE!"# | Used for text input or special characters. |
| CD /II | Play/Pause for CD function. |
| CLEAR | Clears current selection or input. |
| TAPE | Selects the Tape function. |
| TUNER/BAND | Selects the Tuner function and switches between AM/FM bands. |
| EXT-IN | Selects the External Input source. |
| VOL - / + VOL | Decreases or increases the volume level. |
| ALBUM | Navigates between albums or folders. |
| V/REW / ^/FF | Rewind/Fast Forward or track skip. |
| ENTER | Confirms selections. |
| TITLE SEARCH | Initiates title search function. |
| MANUAL EQ | Adjusts equalizer settings manually. |
| DISPLAY | Changes display information on the stereo system. |
| DIMMER | Adjusts the brightness of the stereo system's display. |
| HARD BASS | Activates or deactivates enhanced bass. |
| PRESET EQ | Cycles through preset equalizer modes. |
| MUTING | Mutes or unmutes the audio output. |
6. Maintenance
6.1 Cleaning the Remote Control
To clean the remote control, gently wipe it with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water and then wipe dry immediately. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface and markings.
6.2 Battery Replacement
Replace batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries at the same time with new AA ALKALINE batteries. Refer to Section 4.1 for battery installation instructions.
Caution: Dispose of used batteries according to local regulations. Do not expose batteries to excessive heat or fire.
7. Troubleshooting
- Remote not responding:
- Ensure batteries are inserted correctly with the correct polarity.
- Replace old batteries with new AA ALKALINE batteries.
- Check for any obstructions between the remote control and the stereo system's infrared sensor.
- Ensure you are within the effective operating range and pointing the remote directly at the stereo system.
- Intermittent operation:
- Batteries may be low. Replace them.
- Strong light sources (e.g., direct sunlight, fluorescent lights) can interfere with infrared signals. Try operating the remote in a different lighting condition.
8. Specifications
| Feature | Detail |
|---|---|
| Model | N2QAYB000142 |
| Brand | ECONTROLLY |
| Compatibility | Panasonic CD Stereo Systems (SC-AK450, SA-AK450, SB-AK450, SC-AK350, SA-AK350, SB-AK350, SC-AK250, SA-AK250, SB-AK250) |
| Remote Type | Infrared (IR) |
| Programming | Not required (Pre-programmed) |
| Power Source | 2 x AA ALKALINE batteries (not included) |
| Product Dimensions | 3.94 x 1.57 x 0.59 inches (approximately) |
| Item Weight | 1.76 ounces (without batteries) |
| Color | Gray |
Figure 3: Remote Control Dimensions. This image shows the remote control with its approximate length (5.7 inches) and width (2.0 inches) marked.
9. Warranty and Support
Information regarding specific warranty terms for this ECONTROLLY product is not provided in the product details. For warranty claims or technical support, please refer to the seller or manufacturer's contact information provided at the time of purchase.
Keep your purchase receipt as proof of purchase for any support inquiries.
