Aquonderful 102S-W

Download PDF
Contents

Aquonderful 102S-W Oval Smart Bidet Toilet Seat User Manual

Model: 102S-W Oval

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Aquonderful 102S-W Oval Smart Bidet Toilet Seat. Please read this manual thoroughly before use to ensure proper function and safety. Keep this manual for future reference.

Aquonderful 102S-W Oval Smart Bidet Toilet Seat with Remote Control

Figure 1: Aquonderful 102S-W Oval Smart Bidet Toilet Seat and Remote Control.

2. Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

  • Ensure the power outlet is properly grounded and matches the voltage requirements of the bidet seat.
  • Do not immerse the bidet seat or remote control in water.
  • Unplug the unit before cleaning or performing any maintenance.
  • Keep the remote control away from water and direct sunlight.
  • Do not attempt to repair the unit yourself. Contact qualified service personnel for assistance.
  • This product is designed for household use only.

3. What's in the Box

Verify that all components are present before beginning installation:

Contents of the Aquonderful 102S-W Bidet Toilet Seat box

Figure 2: Included components for the Aquonderful 102S-W Bidet Toilet Seat.

  • 1x Smart Bidet Seat
  • 1x Wireless Remote Control
  • 1x Instruction Manual
  • 2x Screws
  • 2x Gaskets
  • 2x Steel Discs
  • 1x Mounting Plate
  • 2x Anchoring Rubbers
  • 1x Three-way Valve
  • 1x PE Pipe

4. Setup and Installation

Follow these steps for proper installation. A standard electrical outlet is required near the toilet.

Toilet Fit Check Guide for Bidet Seat Installation

Figure 3: Toilet Fit Check Guide. Ensure your toilet bowl is Oval and has an accessible electrical outlet.

4.1. Pre-Installation Check

  • Confirm your toilet bowl shape is Oval. This model is designed for Oval toilets.
  • Ensure a grounded electrical outlet (120V AC) is within reach of the bidet seat's power cord.
  • Turn off the water supply to the toilet and flush to empty the tank.

4.2. Installation Steps

Four-step guide for DIY installation of the bidet toilet seat

Figure 4: Visual guide for the easy DIY installation process.

  1. Remove Existing Toilet Seat: Unscrew and remove your current toilet seat and lid.
  2. Install Mounting Plate: Place the mounting plate over the toilet bowl holes. Insert the anchoring rubbers into the holes, then secure the mounting plate with the steel discs and screws. Tighten firmly.
  3. Install Bidet Seat: Slide the Aquonderful bidet seat onto the installed mounting plate until it clicks into place.
  4. Connect Hoses:
    • Disconnect the existing water supply hose from the toilet tank.
    • Install the provided three-way valve to the toilet tank's water inlet.
    • Connect the original water supply hose to one outlet of the three-way valve.
    • Connect the provided PE pipe from the bidet seat to the other outlet of the three-way valve.
  5. Restore Water and Power: Turn on the water supply to the toilet. Check for leaks. Plug the bidet seat into the electrical outlet.

5. Operating Instructions

The Aquonderful 102S-W is operated using the wireless remote control. Familiarize yourself with the remote's functions for a personalized experience.

Wireless Remote Control for Aquonderful Smart Bidet Toilet Seat with function labels

Figure 5: Wireless Remote Control and its various functions.

5.1. Key Functions

  • Rear Wash: Activates the rear cleansing spray.
  • Front Wash (Bidet Wash): Activates the feminine cleansing spray.
  • Adjustable Nozzle Position: Moves the nozzle forward or backward for optimal cleansing.
  • Adjustable Water Pressure: Increases or decreases the water spray intensity.
  • Adjustable Water Temperature: Selects desired water temperature (cold, warm, hot).
  • Warm Air Drying: Activates the warm air dryer.
  • Adjustable Warm Air Temperature: Controls the temperature of the warm air dryer (High, Middle, Low).
  • Heated Seat: Turns on/off the heated seat function.
  • Night Light: Activates the LED night light for visibility in the dark.
  • Kids Mode: Provides a gentle wash and dry cycle suitable for children.
  • Auto Mode: Initiates a pre-programmed wash and dry cycle.
  • Stop/Power: Stops any active function or turns the unit on/off.
  • ECO Mode: Activates energy-saving mode to reduce power consumption.
  • Voice ON/OFF: Toggles voice prompts or sounds.
Diagram showing slow closing seat, heated seat, warm air dryer, night light, and stainless steel nozzle features

Figure 6: Overview of integrated features including slow-closing lid, heated seat, warm air dryer, night light, and stainless steel nozzle.

Adjustable warm air dryer settings: High, Middle, Low

Figure 7: Adjustable warm air drying settings.

Illustrations of Rear Wash, Front Wash, Oscillating Wash, and Self-cleaning Nozzle functions

Figure 8: Various wash modes and self-cleaning nozzle.

6. Maintenance

Regular cleaning and maintenance will ensure the longevity and hygienic operation of your bidet seat.

6.1. Cleaning the Bidet Seat

  • Unplug the bidet seat from the power outlet before cleaning.
  • Wipe the exterior surfaces with a soft, damp cloth and a mild, non-abrasive cleaner.
  • Do not use harsh chemicals, abrasive pads, or solvents, as these can damage the finish.
  • For the nozzle, the bidet features a self-cleaning function. For deeper cleaning, gently pull out the nozzle and wipe it with a soft cloth.

6.2. Filter Maintenance (If Applicable)

Some bidet models include a water filter. Refer to the product specifications or contact support if you suspect your model has a replaceable filter and requires maintenance.

7. Troubleshooting

If you encounter issues with your Aquonderful bidet seat, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No powerPower cord unplugged, circuit breaker tripped, or power outage.Ensure the power cord is securely plugged in. Check your household circuit breaker.
No water sprayWater supply valve closed, water filter clogged, or nozzle blocked.Open the water supply valve. Clean or replace the water filter (if applicable). Clean the nozzle.
Water temperature not adjustingWater heater setting incorrect or insufficient time for heating.Adjust water temperature settings on the remote. Allow a few moments for water to heat.
Seat not heatingHeated seat function off or temperature setting too low.Activate the heated seat function and adjust the temperature setting on the remote.
Remote control not workingDead batteries or remote out of range.Replace batteries in the remote control. Ensure you are within range of the bidet seat.

If the problem persists after attempting these solutions, please contact Aquonderful customer support.

8. Specifications

FeatureDetail
Model Number102S-W
BrandAquonderful
ShapeOval
ColorWhite
MaterialAcrylonitrile Butadiene Styrene (ABS)
Product Dimensions20"L x 15"W
Item Weight11 Pounds
Power SourceCorded Electric (Batteries Required for Remote)
Special FeaturesUnlimited Warm Water, Heated Seat, Warm Air Dryer, Night Light, Remote Control, Self-cleaning Nozzle, Slow-closing Lid

9. Warranty and Support

Aquonderful products are manufactured with quality and reliability in mind. For specific warranty details regarding your 102S-W Smart Bidet Toilet Seat, please refer to the warranty card included with your purchase or visit the official Aquonderful website.

Customer Support

If you have any questions, require technical assistance, or need to report an issue, please contact Aquonderful customer support through the following channels:

  • Website: Visit the Aquonderful official website for FAQs and support contact information.
  • Email: Refer to your product packaging or warranty card for customer service email address.

© 2025 Aquonderful. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.