1. Setup and Assembly
The Pinmoco Nightstands are designed for straightforward assembly. An assembly guide is included with your purchase. Please ensure all parts are present before beginning assembly.
1.1 Required Tools
- Screwdriver (not included)
1.2 Assembly Steps
- Unpack all components and verify against the included parts list.
- Follow the step-by-step instructions in the assembly guide to construct the nightstand frame.
- Attach the legs securely to the base of the nightstand.
- Install the two drawers into their respective slots. Ensure they slide smoothly.
- Connect the power cable for the charging station and LED lights. Route the cable through the designated cable management hole at the back of the unit.
- Place the nightstand in its desired location. Ensure it is stable before use.
Image: Product dimensions for the Pinmoco Nightstand.
Image: Two spacious drawers for ample storage.
2. Operating Instructions
2.1 LED Lighting
The nightstand features an integrated LED light strip. This strip can be installed in two ways:
- Inside the drawer: Provides soft illumination within the drawer, aiding in finding items in low-light conditions.
- At the bottom of the cabinet: Adds ambient lighting to the surrounding room.
To activate the LED light, press the dedicated button located on the top surface of the nightstand.
Image: Features overview including LED light placement options.
Video: Pinmoco LED Nightstands Set of 2 with 2 Drawers. This video demonstrates the LED lighting features and drawer functionality of the nightstands.
2.2 Built-in Charging Station
The nightstand includes a built-in charging station on its top surface, featuring both a USB port and a Type-C port. This allows for convenient charging of mobile devices directly from the nightstand.
- Connect your device's charging cable to the appropriate USB or Type-C port.
- Ensure the nightstand is plugged into a power outlet for the charging station to function.
Image: Convenient charging station with USB and Type-C ports, and LED strip button.
Video: Pinmoco LED Nightstands Set of 2 with Charging Station. This video highlights the integrated charging capabilities of the nightstands.
3. Maintenance
3.1 Cleaning
The nightstands are made from P2-grade particle board with a high-gloss finish, making them wear-resistant and waterproof. To clean, wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
3.2 Stability and Care
- Ensure the nightstand is placed on a level surface.
- The metal feet are equipped with anti-slip rubber pads to prevent floor scratches and reduce noise. Periodically check these pads for wear.
- Do not overload the drawers or the top surface. The top surface has a maximum weight capacity of 88 lbs, and each drawer has a maximum weight capacity of 20 lbs.
- Keep the nightstand away from direct heat sources and prolonged sunlight to prevent material degradation.
4. Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| LED lights not working | Not plugged in; loose connection; faulty LED strip. | Ensure the nightstand is properly plugged into a working power outlet. Check all cable connections. If the issue persists, contact customer support. |
| Charging ports not functioning | Not plugged in; loose connection; device incompatibility; faulty port. | Verify the nightstand is plugged in. Check cable connections. Test with a different device and cable. If still not working, contact customer support. |
| Drawers are stiff or not sliding smoothly | Improper assembly; obstruction in the slide rail; damaged rail. | Review assembly instructions to ensure drawers are installed correctly. Check for any objects obstructing the slide rails. Contact support if rails appear damaged. |
| Nightstand feels unstable or wobbly | Uneven floor; loose leg connections; damaged leg. | Ensure the nightstand is on a flat, level surface. Tighten all leg screws. If a leg is damaged, contact customer support for replacement parts. |
| Missing parts or damaged components upon arrival | Shipping damage; packaging error. | Do not proceed with assembly. Contact Pinmoco customer support immediately for parts replacement or service. |
5. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Pinmoco |
| Model | 2-Drawer Nightstand Set (Oak) |
| Dimensions (Overall) | 39.90 cm (W) x 25.81 cm (D) x 56.11 cm (H) |
| Item Weight | 36.16 Pounds (per set) |
| Frame Material | Wood |
| Top Material Type | Oak Wood |
| Furniture Finish | Glossy |
| Number of Drawers | 2 per nightstand |
| Charging Ports | 1x USB, 1x Type-C |
| LED Lighting | Integrated LED strip with dual installation options |
| Assembly Required | Yes |
| Included Components | Assembly Guide |
6. Warranty & Support
Pinmoco is committed to providing quality products. If you encounter any issues such as missing parts, bent components, or manufacturing defects, please contact our customer support team immediately. We offer parts replacement or upgrade services to ensure your satisfaction.
6.1 Protection Plans
Extended protection plans are available for purchase to cover your product beyond the standard warranty. Options include:
- 2-Year Protection Plan: $15.99 (one-time billing)
- 3-Year Protection Plan: $20.99 (one-time billing)
- Complete Protect: $16.99 (monthly billing) - Covers all eligible past and future purchases.
For more details on protection plans or to initiate a claim, please refer to your purchase documentation or contact the retailer.
6.2 Safety Information
Always follow the assembly instructions carefully. Ensure the table is properly assembled and stable before use. Do not overload the table as it may tip over. Keep the table away from heat sources and do not place heavy objects on the top to prevent tipping.