1. Introduction
Thank you for purchasing the Reality Leuchten Bidar R81572031 Spotlight Bar. This 2-bulb spotlight bar features a matte white metal finish with natural wood accents, designed to provide versatile lighting for your indoor spaces. The spotlights can be rotated and swiveled, allowing you to direct light precisely where needed. This manual provides essential information for safe installation, operation, and maintenance of your new lighting fixture.
Image 1.1: Front view of the Reality Leuchten Bidar R81572031 Spotlight Bar.
2. Safety Instructions
Please read these safety instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
- Do not connect the fixture to a power source if it is damaged or incomplete.
- Ensure the voltage and frequency of your power supply match the specifications of the fixture.
- Do not exceed the maximum wattage for the light bulbs (2 x E14 max. 10 watts).
- Avoid touching the bulbs immediately after they have been on, as they can be very hot.
- Keep flammable materials away from the light fixture.
- This product is designed for indoor use only. Do not expose to moisture or extreme temperatures.
3. Package Contents
Carefully unpack the box and ensure all components are present and undamaged. If any parts are missing or damaged, do not proceed with installation and contact your retailer.
- 1 x Reality Leuchten Bidar R81572031 Spotlight Bar
- Mounting instruction manual
- Mounting hardware (screws, wall plugs, etc. - typically included with mounting instruction)
Note: Light bulbs are not included and must be purchased separately.
4. Setup and Installation
Follow these steps for proper installation of your spotlight bar. Refer to the included mounting instruction for detailed diagrams.
- Prepare for Installation: Turn off the main power supply to the installation area at the circuit breaker. Ensure the power is completely off before proceeding.
- Marking and Drilling: Position the mounting bracket (if separate) or the fixture base against the ceiling or wall where you intend to install it. Use a pencil to mark the drilling points. Drill holes of appropriate size for the provided wall plugs (if necessary).
- Secure Mounting Bracket/Base: Insert wall plugs into the drilled holes. Secure the mounting bracket or the fixture base to the ceiling/wall using the provided screws. Ensure it is firmly attached.
- Electrical Connection: Connect the electrical wires from your ceiling/wall to the corresponding wires on the fixture. Typically, this involves connecting live (L), neutral (N), and ground (earth) wires. Ensure all connections are secure and properly insulated.
- Attach Fixture Body: Carefully attach the main body of the spotlight bar to the secured mounting bracket/base. Ensure it is securely fastened according to the mounting instructions.
- Install Light Bulbs: Screw in two E14 base light bulbs (max. 10 watts each) into the lamp holders. Do not overtighten.
- Restore Power: Once installation is complete and all connections are secure, restore power at the main circuit breaker.
Image 4.1: Dimensions of the spotlight bar (280mm length, 270mm height from ceiling).
Image 4.2: Technical drawing showing detailed measurements and angles for installation.
5. Operating Instructions
Once installed and powered, the Reality Leuchten Bidar R81572031 Spotlight Bar is ready for use.
- Turning On/Off: Operate the light fixture using your standard wall switch connected to the circuit.
- Adjusting Spotlights: The individual spotlights can be rotated and swiveled to direct the light beam as desired. Gently adjust the lamp heads to achieve your preferred lighting angle.
Image 5.1: The spotlight bar installed on a ceiling, illuminated.
6. Maintenance
Regular maintenance will help ensure the longevity and optimal performance of your spotlight bar.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement: Always disconnect power before replacing bulbs. Allow old bulbs to cool completely before removal. Replace with new E14 bulbs, ensuring they do not exceed the maximum 10-watt rating.
- Inspection: Periodically check for any loose connections or signs of wear. If any damage is observed, discontinue use and consult a qualified electrician.
7. Troubleshooting
If you encounter issues with your spotlight bar, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring connection Faulty bulb Tripped circuit breaker | Check power switch and circuit breaker. Ensure all wiring connections are secure (with power off). Replace bulb. Reset circuit breaker. |
| Light flickers | Loose bulb Incorrect bulb type/wattage Loose wiring | Tighten bulb. Ensure correct E14, max 10W bulbs are used. Check wiring connections (with power off). |
| Overheating | Bulb wattage too high Insufficient ventilation | Use only recommended E14 max 10W bulbs. Ensure fixture is not covered or in an enclosed space. |
If the problem persists after attempting these solutions, please contact a qualified electrician or the retailer for assistance.
8. Specifications
| Brand | RL LIVE YOUR LIGHT |
| Model Number | R81572031 |
| Product Dimensions | 12 x 28 x 27 cm (L x W x H); 995 g |
| Item Weight | 1 Kilogram |
| Colour | Matte White |
| Material | Metal |
| Style | Spotlight bar 2 bulbs |
| Bulb Type | E14 (not included) |
| Max. Wattage per Bulb | 10 watts |
| Batteries Required | No |
| Included Components | Mounting instruction |
| ASIN | B0DWY39CDS |
9. Warranty and Support
For warranty information, please refer to the terms and conditions provided by your retailer or the manufacturer, RL LIVE YOUR LIGHT. Keep your proof of purchase for any warranty claims.
If you require technical support, have questions about installation, or need to report a defect, please contact the retailer from whom you purchased the product or visit the official RL LIVE YOUR LIGHT website for customer service contact details.
