Memorex MX-BTS10(W) Bluetooth Speaker User Manual

Introduction

Thank you for choosing the Memorex MX-BTS10(W) Bluetooth Speaker. This portable speaker is designed to deliver high-quality audio with versatile connectivity options, including Bluetooth 5.1, USB, TF card, and FM radio. It also features hands-free calling and dynamic LED lighting. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure you get the most out of your device.

Important Safety Information

• Do not expose the speaker to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the speaker to strong impacts.
• Do not attempt to disassemble, repair, or modify the speaker. This will void the warranty.
• Keep the speaker away from heat sources such as radiators, stoves, or other heat-producing appliances.
• Use only the provided or approved charging cable.
• Clean the speaker only with a dry, soft cloth.

Package Contents

Please check the package for the following items:

• Memorex MX-BTS10(W) Portable Bluetooth Speaker
• Quick Start Guide
• USB-C Charging Cable (not explicitly listed in whats_in_the_box but implied by USB-C charging)

Product Overview

Familiarize yourself with the various parts and controls of your Memorex MX-BTS10(W) speaker.

Figure 1: Front view of the Memorex MX-BTS10(W) Bluetooth Speaker, showcasing the LED lighting on top and control buttons on the side.

Figure 2: The speaker shown with icons highlighting its key features: rechargeable battery, hands-free calling, 8 hours play time, USB-C charging port, LED lighting, and super bass.

Controls and Ports

• Power Button: Press and hold to turn the speaker on or off.
• Volume Up (+): Short press to increase volume. Long press for next track.
• Volume Down (-): Short press to decrease volume. Long press for previous track.
• Play/Pause Button: Press to play or pause music. Answer/end calls.
• Mode Button (M): Press to switch between Bluetooth, FM Radio, USB, and TF Card modes.
• USB Port: For USB drive playback.
• TF Card Slot: For TF (microSD) card playback.
• DC 5V (USB-C) Port: For charging the speaker.

Initial Setup

Charging the Speaker

Before first use, fully charge the speaker. Connect the USB-C charging cable to the DC 5V port on the speaker and the other end to a USB power adapter (not included) or a computer's USB port. The LED indicator will show charging status and turn off when fully charged.

Powering On/Off

• To Power On: Press and hold the Power button for approximately 3 seconds until you hear an audible prompt.
• To Power Off: Press and hold the Power button for approximately 3 seconds until you hear an audible prompt.

Operating Instructions

Bluetooth Pairing

The speaker will automatically enter Bluetooth pairing mode when powered on for the first time or if no other mode is selected.

1. Ensure the speaker is powered on and in Bluetooth mode (indicated by a flashing LED).
2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
3. Select "Memorex MX-BTS10(W)" from the list of devices.
4. Once paired, the speaker will emit an audible confirmation, and the LED will stop flashing.
5. You can now play audio from your device through the speaker.

Figure 3: The speaker connected via Bluetooth to a tablet, ready for music playback.

USB/TF Card Playback

The speaker supports playback from USB drives and TF (microSD) cards.

1. Insert a USB drive into the USB port or a TF card into the TF card slot.
2. Press the Mode (M) button to switch to USB or TF Card mode. The speaker will automatically detect and play audio files (MP3, WMA, APE, FLAC, AAC, MP4, M4A, WAV, AIF, AIFC).
3. Use the Play/Pause, Volume Up (+), and Volume Down (-) buttons to control playback.

FM Radio Mode

To use the built-in FM radio:

1. Press the Mode (M) button to switch to FM Radio mode.
2. Press and hold the Play/Pause button to automatically scan and save available FM stations.
3. Use the Volume Up (+) and Volume Down (-) buttons (short press) to navigate between saved stations.

Hands-Free Calling

When connected via Bluetooth to your smartphone, you can use the speaker for hands-free calls.

• Answer Call: Press the Play/Pause button once.
• End Call: Press the Play/Pause button once during a call.
• Reject Call: Press and hold the Play/Pause button for 2 seconds.

LED Lighting Control

The speaker features dynamic LED lighting that syncs with your music. The lighting effects are typically enabled by default. Refer to the Quick Start Guide for specific instructions on how to cycle through or disable LED lighting modes, if applicable.

Care and Maintenance

• Cleaning: Wipe the speaker with a soft, dry, lint-free cloth. Do not use abrasive cleaners, alcohol, or chemical solvents.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use.

Troubleshooting

If you encounter issues with your speaker, please refer to the table below for common problems and solutions.

Specifications

Warranty and Support

Memorex products are manufactured with high-quality standards. For specific warranty information and support, please refer to the warranty card included with your product or visit the official Memorex website. Keep your purchase receipt as proof of purchase for warranty claims.