ATLAS PRO-9D 2-Post Vehicle Lift Instruction Manual

1. Introduction and Overview

The ATLAS PRO-9D 2-Post Vehicle Lift is engineered for robust performance and versatility, offering a substantial 9,000 lb. lifting capacity suitable for a wide range of vehicles, from small cars to heavier trucks. Its clear floor design ensures an unobstructed workspace beneath the vehicle, enhancing accessibility during maintenance tasks. This lift features a dual direct-drive cylinder system, minimizing moving parts for increased reliability and long-term dependable service. The innovative EZ-metric lift arm configuration provides both asymmetric and symmetric arm options, allowing for flexible vehicle positioning and easy access for low-profile vehicles. Safety is paramount, with automatic arm restraints, a single-point lock release, and rubber guards on the carriages to protect vehicles. The durable powder-coat finish ensures longevity and maintains the lift's appearance. The PRO-9D includes an 8-piece truck adapter set and all necessary mounting hardware for a complete installation package.

2. Safety Information

Always read and understand the entire instruction manual before operating the vehicle lift. Failure to follow safety instructions can result in serious injury or death. Ensure the lift is installed on a level, solid concrete foundation capable of supporting the lift's weight and maximum load. Never exceed the rated lifting capacity. Always engage safety locks before working under a vehicle. Keep hands and feet clear of moving parts. Use appropriate personal protective equipment (PPE) such as safety glasses and gloves. Do not allow unauthorized personnel to operate the lift. Regularly inspect the lift for any signs of wear, damage, or malfunction.

3. Components Overview

• Columns: Two vertical support structures that house the lifting mechanisms.
• Lifting Arms: Adjustable arms that extend from the columns to support the vehicle. Features both asymmetric and symmetric configurations.
• Lift Pads/Adapters: Rubber-padded contact points on the lifting arms that interface with the vehicle's frame. Includes an 8-piece truck adapter set.
• Power Unit: Hydraulic pump and motor assembly that provides the power for lifting.
• Hydraulic Cylinders: Dual direct-drive cylinders located within each column for lifting.
• Safety Locks: Automatic locking mechanisms that engage at various lift heights to prevent accidental lowering.
• Single-Point Lock Release: A centralized lever for disengaging all safety locks simultaneously.
• Overhead Beam: Connects the top of the two columns, providing structural integrity and housing cables/hoses.

4. Setup and Installation

Proper installation is critical for the safe and reliable operation of your ATLAS PRO-9D vehicle lift. It is recommended that installation be performed by qualified personnel. Ensure the installation site meets all minimum requirements, including a level concrete slab of adequate thickness and strength.

4.1 Site Requirements and Dimensions

• Minimum Ceiling Height: 12 feet (144 inches).
• Overall Height: 144 inches (12 feet).
• Overall Width (Without Power Unit): 134 1/4 inches (11 feet 2 1/4 inches).
• Overall Width (With Power Unit): 142 1/2 inches (11 feet 10 1/2 inches).
• Inside Columns: 109 5/8 inches (9 feet 1 5/8 inches).
• Symmetric Drive Thru: 100 1/4 inches (8 feet 4 1/4 inches).
• Asymmetric Drive Thru: 90 1/2 inches (7 feet 6 1/2 inches).
• Max Lifting Height: 74 1/2 inches (6 feet 2 1/2 inches).
• Padded Bar Height: 135 1/4 inches (11 feet 3 1/4 inches).

Figure 1: Overall dimensions of the ATLAS PRO-9D 2-Post Vehicle Lift with a red truck. The overall height is 144 inches (12 feet) and the inside column measurement is 109 5/8 inches (9 feet 1 5/8 inches).

Figure 2: Front view of the lift showing overall width (without power unit) of 134 1/4 inches (11 feet 2 1/4 inches) and max lifting height of 74 1/2 inches (6 feet 2 1/2 inches).

4.2 Arm Configurations

The lift supports both symmetric and asymmetric arm configurations to accommodate various vehicle types.

Figure 3: Diagram showing the difference in drive-thru measurements for symmetric and asymmetric arm setups.

4.3 Installation Video Guide

5. Operating Instructions

Follow these steps for safe and effective operation of your vehicle lift.

5.1 Preparing the Vehicle

• Position the vehicle centrally between the columns.
• Ensure the vehicle's weight is within the lift's 9,000 lb. capacity.
• Adjust the lifting arms to align with the vehicle's manufacturer-recommended lifting points. Use the provided truck adapters if necessary.

Figure 4: Lifting arms shown in an asymmetric loading position, demonstrating flexibility for various vehicle types.

5.2 Lifting Procedure

• Press and hold the 'UP' button on the power unit to raise the vehicle.
• As the vehicle rises, the automatic arm restraints will engage, preventing the arms from moving.
• Raise the vehicle to the desired working height. The safety locks will automatically engage at various intervals, indicated by a 'click' sound.
• Once at the desired height, slightly lower the vehicle onto the nearest safety lock position by pressing the 'DOWN' lever and then releasing it. This ensures the vehicle is resting securely on the mechanical locks.

Figure 5: Close-up view of the safety arm locks, which engage automatically as the lift carriage rises, preventing arm movement.

5.3 Lowering Procedure

• Ensure all tools and personnel are clear from under the vehicle.
• Slightly raise the vehicle off the safety locks by pressing the 'UP' button momentarily.
• Pull the single-point lock release lever to disengage all safety locks.
• Press and hold the 'DOWN' lever to smoothly lower the vehicle to the ground.

5.4 Operation Video Guide

6. Maintenance and Care

Regular maintenance ensures the longevity and safe operation of your ATLAS PRO-9D vehicle lift. The dual direct-drive cylinders contribute to years of dependable service with reduced moving parts.

6.1 Daily Checks

• Inspect all safety locks and arm restraints for proper function.
• Check for any visible damage to cables, hoses, or structural components.
• Ensure the lift pads are in good condition and securely attached.

6.2 Weekly Checks

• Check hydraulic fluid level in the power unit reservoir. Refill if necessary with recommended hydraulic oil.
• Inspect all hydraulic connections for leaks.
• Lubricate all pivot points and sliding surfaces as per the manufacturer's lubrication schedule.

6.3 Monthly Checks

• Inspect anchor bolts for tightness.
• Check electrical connections for corrosion or damage.
• Verify that the lift operates smoothly through its full range of motion.

7. Troubleshooting

For any complex issues or malfunctions, it is highly recommended to contact a certified technician or ATLAS Automotive Equipment customer support. Attempting repairs without proper training and tools can be dangerous and may void your warranty.

• Lift does not raise: Check power supply, hydraulic fluid level, and ensure no obstructions.
• Lift lowers unevenly: Inspect hydraulic lines for leaks or blockages, and check cable tension.
• Unusual noises during operation: Stop operation immediately and inspect for loose components, worn parts, or hydraulic issues.

8. Specifications

9. Warranty and Support

The ATLAS PRO-9D 2-Post Vehicle Lift is backed by a 5-year structural warranty and a 2-year hydraulic-power warranty, ensuring peace of mind regarding its quality and durability. For technical assistance, parts, or warranty claims, please contact ATLAS Automotive Equipment customer support directly. Always refer to your purchase documentation for specific warranty terms and conditions.