Quictent 1141W

Download PDF
Contents

Quictent 12x20 ft Heavy Duty Carport Canopy Instruction Manual

Model: 1141W

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Quictent 12x20 ft Heavy Duty Carport Canopy. Designed for versatile outdoor use, this carport offers robust protection for vehicles, boats, or other equipment. Please read all instructions carefully before beginning assembly or use to ensure safe and proper installation.

Quictent 12x20 ft Heavy Duty Carport Canopy with a blue car inside

Image: Quictent 12x20 ft Heavy Duty Carport Canopy providing shelter for a blue vehicle.

Safety Information

  • Always follow the manufacturer's instructions for setup, use, and dismantling.
  • Ensure the carport is properly anchored to the ground, especially in windy conditions, to prevent structural damage or collapse.
  • Keep flammable materials away from the carport when using heat sources.
  • This carport is not rated for heavy snow loads. In areas with significant snowfall, it is recommended to clear snow accumulation promptly or dismantle the carport for the winter season to prevent collapse.

Package Contents

Verify all components are present before beginning assembly. Refer to the parts diagram in the installation video for visual identification.

Frame Components:

  • Posts (A): Vertical support poles.
  • Tubes (G): Horizontal support tubes.
  • Crossbeams (C, D): Horizontal and slant beams for roof structure.
  • Tee-Junctions (E): Connectors for three pipes.
  • Cross Fittings (F): Connectors for multiple pipes.
  • Bases (B): Footplates for posts.

Covering & Accessories:

  • Canopy (H): Main roof cover.
  • Walls (J): Sidewalls with roll-up ventilated mesh windows and window covers.
  • Elastic Cords (K): For securing canopy and walls.
  • Stakes (N, O): Ground anchors.
  • Sandbags (S): For additional weight and stability.
  • Bolts (M): For securing connections.
  • Wrenches (P, Q): Tools for assembly.
Close-up of galvanized steel pipes for carport frame

Image: Galvanized steel pipes, indicating anti-corrosion, aging resistance, and non-deformation properties.

Setup and Assembly

Assembly is recommended with two people for efficiency and ease. Basic tools such as a hammer, screwdriver, and tape measure may be helpful, though most connections are snap-fit or bolted.

Assembly Video:

Video: Jocoevol 10x20 FT Carport installation instructions. This video demonstrates the step-by-step assembly process for a similar carport model.

Step-by-Step Instructions:

  1. Assemble the Top Frame: Lay out the Crossbeams (C, D), Tee-Junctions (E), and Cross Fittings (F) on a flat surface. Connect them one by one according to the diagram to form the roof structure. Secure connections with Bolts (M) where indicated.
  2. Attach the Canopy (H): Carefully drape the main canopy fabric over the assembled top frame. Ensure it is centered and aligned correctly.
  3. Install Vertical Posts (A): Attach the Bases (B) to the bottom of each Post (A) using Bolts (M). Then, connect the Posts (A) to the top frame.
  4. Secure Canopy to Frame: Use the Elastic Cords (K) to secure the canopy (H) to the frame's crossbeams through the grommets.
  5. Attach Sidewalls (J): Fix the two sidewalls (J) to the carport frame. Use Elastic Cords (K) to secure the top edge of the sidewalls to the crossbeams. The bottom of the sidewalls should be fixed onto the posts (A) and secured with Velcro straps.
  6. Ground Anchoring: Secure the entire carport to the ground using the provided Stakes (N, O) and Tension Ropes (L). For enhanced stability, attach the Sandbags (S) to the posts (A) and fill them with sand.
Diagram showing four steps of carport installation

Image: Visual guide illustrating the four main installation steps: assemble top frame, cover with tarp, assemble pillar steel pipes, and cover sides with tarpaulins.

Operating Instructions

Roll-up Ventilated Windows:

The sidewalls feature mesh windows with roll-up covers. To open a window, unzip the cover and roll it upwards, securing it with the attached fasteners. This allows for ventilation during warmer weather. To close, unroll the cover and zip it down to protect against elements.

Close-up of roll-up mesh window on carport sidewall

Image: Detail of the roll-up breathable mesh windows on the carport sidewall.

Front and Rear Doors:

The carport includes roll-up front and rear doors for easy vehicle access. Roll them up and secure them to the top frame using the integrated straps when not in use.

Maintenance

  • Regular Inspection: Periodically check all connections, ropes, and stakes to ensure they are secure and in good condition. Tighten any loose bolts or re-anchor stakes as needed.
  • Cleaning: Clean the polyethylene fabric with mild soap and water. Avoid harsh chemicals that could damage the material.
  • Snow Removal: This carport is not designed to withstand heavy snow loads. In snowy regions, it is crucial to remove snow accumulation from the roof promptly to prevent collapse. Consider dismantling the carport for the winter if heavy snowfall is anticipated.
  • Wind Protection: Always ensure the carport is securely anchored, especially in high winds. Use all provided stakes, ropes, and sandbags for maximum stability.
Carport protecting a car from various weather elements

Image: The carport cover is designed to withstand various elements including water, berry drippings, and bird droppings.

Specifications

BrandQuictent
Model Number1141W
Product Dimensions240"L x 144"W x 110"H (12'x20')
Floor Area240 Square Feet
Item Weight108 pounds
Frame MaterialAlloy Steel (Galvanized)
Cover MaterialExtra-thick Polyethylene Fabric (Tear-proof, Waterproof, Anti-UV)
ColorWhite
Assembly RequiredYes
Diagram showing dimensions of the 12x20 ft carport

Image: Size information for the carport, indicating 12ft width, 20ft length, and 9.2ft height.

Warranty and Support

Warranty Information:

  • Lifetime Warranty Replacement: For Connectors, Pegs, Ropes, Elastic cords, etc.
  • 1 Year Warranty: For Covers and Poles.

Customer Support:

For any questions, concerns, or warranty claims, please contact Quictent customer support. You can typically find contact information on the product's retail page or the manufacturer's website.

Laptop screen showing customer service contact information for Brandline

Image: A laptop displaying customer service contact options for Brandline, the seller of Quictent products.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.