Monster S220

Monster S220 Bluetooth Soundbar User Manual

Model: S220 | Brand: Monster

Introduction

Thank you for purchasing the Monster S220 Bluetooth Soundbar. This manual provides essential information for setting up, operating, and maintaining your soundbar to ensure optimal performance and longevity. Please read this manual thoroughly before use and retain it for future reference.

What's in the Box

Carefully unpack all components and ensure the following items are included:

If any items are missing or damaged, please contact customer support.

Product Features

The Monster S220 Soundbar is designed to enhance your audio experience with its advanced features:

Product Overview

Monster S220 Bluetooth Soundbar

Figure 1: Front view of the Monster S220 Bluetooth Soundbar.

Monster S220 Soundbar Rear Panel with Ports

Figure 2: Rear panel showing AUX, USB, TF Card, DC 5V (USB-C charging), and On/Off switch.

Monster S220 Soundbar Dimensions

Figure 3: Dimensions of the Monster S220 Soundbar: 20 inches long, 2.4 inches deep, and 2.4 inches high.

Internal view of Monster S220 Soundbar speakers and bass diaphragms

Figure 4: Diagram illustrating the dual 52mm full-range speakers and bass diaphragms for enhanced sound quality.

Setup

Initial Charging

Before first use, fully charge the soundbar using the provided USB-C cable. Connect the USB-C end to the soundbar's DC 5V port and the other end to a compatible USB power adapter (not included) or a computer USB port. The charging indicator light will show the charging status.

Placement

Place the soundbar on a stable, flat surface, such as a TV stand, desk, or shelf. For optimal audio performance, position it centrally in front of your television or monitor.

Monster S220 Soundbar placed under a TV in a living room

Figure 5: Example placement of the soundbar under a television.

Operating Instructions

Power On/Off

Locate the On/Off switch on the rear panel of the soundbar. Slide the switch to the "On" position to power on the device. Slide it to the "Off" position to power off.

Mode Selection

The soundbar supports multiple input modes. Use the mode button (if available, typically indicated by an icon on the top panel) to cycle through Bluetooth, AUX, USB, and TF Card modes. The soundbar will indicate the current mode, often through an LED indicator or voice prompt.

Connectivity

Bluetooth Pairing

  1. Ensure the soundbar is powered on and in Bluetooth mode. If it's not automatically in pairing mode, activate it (refer to the soundbar's specific button layout for a dedicated Bluetooth pairing button, if any, or it may enter pairing mode automatically when Bluetooth is selected).
  2. On your device (smartphone, tablet, PC, TV), enable Bluetooth and search for available devices.
  3. Select "Monster S220" from the list of found devices.
  4. Once paired, the soundbar will indicate a successful connection (e.g., a solid blue LED or a voice prompt).
Bluetooth pairing process for Monster S220 Soundbar

Figure 6: Visual representation of connecting a device via Bluetooth to the soundbar.

AUX Connection

To connect via AUX, use a 3.5mm audio cable (not included) to connect the soundbar's AUX port to the audio output port of your device (e.g., TV, PC, projector). Switch the soundbar to AUX mode.

USB and TF Card Playback

Insert a USB flash drive or a TF (microSD) card containing audio files into the respective ports on the soundbar's rear panel. Switch the soundbar to USB or TF Card mode. The soundbar will automatically begin playing compatible audio files.

Monster S220 Soundbar rear panel with AUX, USB, TF Card ports

Figure 7: Close-up of the soundbar's rear panel showing the various input ports.

Charging and Battery

The Monster S220 Soundbar features a built-in 2000mAh battery, allowing for portable use. To charge, connect the soundbar to a 5V USB power source using the provided USB-C cable. A full charge typically takes a few hours. The battery life will vary depending on volume level and usage.

Maintenance

Troubleshooting

ProblemPossible CauseSolution
No powerBattery is depleted; Power switch is off.Charge the soundbar; Ensure the On/Off switch is in the "On" position.
No soundVolume is too low; Incorrect input mode selected; Device not connected properly.Increase volume; Select the correct input mode (Bluetooth, AUX, USB, TF Card); Reconnect the device.
Bluetooth pairing failureSoundbar is not in pairing mode; Device is too far; Interference.Ensure soundbar is in Bluetooth pairing mode; Move device closer to soundbar (within 15 meters); Turn off other Bluetooth devices nearby.
Distorted soundVolume too high; Source audio quality is poor.Reduce volume; Try a different audio source.

For further assistance, please contact customer support.

Specifications

Model NameS220 Black
Speaker TypeSoundbar
Surround Sound Channel Configuration2.0
Speaker Maximum Output Power40 Watts
Wireless Communication TechnologyBluetooth 5.4
Bluetooth Range15 Meters
Connectivity ProtocolBluetooth, AUX, USB, TF Card
Battery Capacity2000 Milliamp Hours
Power SourceBattery Powered
Product Dimensions (L x D x H)20 x 2.4 x 2.4 inches (approx.)
Item Weight2.27 pounds (approx. 725g)
Is WaterproofNo
Included ComponentsSoundbar, USB-C cable, Warning card, User Manual

Warranty and Support

Limited Warranty

The Monster S220 Soundbar comes with a limited warranty. Please refer to the included Warning Card or contact Monster customer support for detailed warranty terms and conditions. This warranty typically covers manufacturing defects but does not cover damage caused by misuse, accidents, or unauthorized modifications.

Customer Support

For any questions, technical support, or warranty claims, please contact Monster customer service. Contact information can typically be found on the product packaging, the official Monster website, or the included Warning Card.

As per product information, 24/7 expert support is available for setup, tuning, or troubleshooting.

Related Documents - S220

Preview MONSTER AII-IN-ONE 36" Indoor/Outdoor Atmos Soundbar (MNSBA36G) User Manual
User manual for the MONSTER AII-IN-ONE 36" Indoor/Outdoor Atmos Soundbar (MNSBA36G). Provides detailed instructions on safety, setup, operation, connectivity (Bluetooth, AUX, Optical, USB, HDMI eARC), troubleshooting, and Dolby Atmos features. Learn how to install, connect, and optimize your soundbar for an immersive audio experience.
Preview Monster Indoor Outdoor Atmos Soundbar SBA36G User Manual
Comprehensive user manual for the Monster Indoor Outdoor Atmos Soundbar SBA36G (MNSBA36G), covering safety precautions, setup, operation, features like Dolby Atmos, connectivity options (Bluetooth, AUX, Optical, HDMI eARC), light modes, troubleshooting, and technical specifications.
Preview Monster Soundstage Pro MNSBA44H User Manual: Setup, Operation, and Troubleshooting
Comprehensive user manual for the Monster Soundstage Pro MNSBA44H 1000W Dolby Atmos 7.1.2 3D Sound System. Learn about setup, operation, remote control, connections, pairing, mounting, and troubleshooting.
Preview Monster Airmars XKT26 True Wireless Bluetooth Headphones - User Manual
Official user manual for Monster Airmars XKT26 true wireless Bluetooth headphones. This guide provides detailed information on product features, specifications, operation, charging, pairing, mode switching, precautions, warnings, hazardous substance information, FCC compliance, and warranty service.
Preview Monster Turbine High Performance In-Ear Speakers Quick Start Guide and Warranty
Quick start guide and warranty information for Monster Turbine High Performance In-Ear Speakers (Model MH TRB IE), covering setup, usage, care, and warranty claims.
Preview Monster ClarityHD Model One High Definition Multi-Media Speaker Monitor User Manual and Warranty
Comprehensive user manual and warranty information for the Monster ClarityHD Model One High Definition Multi-Media Speaker Monitor, covering setup, features, connections, troubleshooting, and warranty details.