EVFOFO B0DWXBTXHS

EVFOFO Red Light Therapy Mask User Manual

Model: B0DWXBTXHS

1. Introduction

The EVFOFO Red Light Therapy Mask is a versatile device designed for at-home skin rejuvenation. It utilizes 7 different LED light colors, each offering specific benefits to address various skin concerns. This manual provides detailed instructions for the safe and effective use of your device.

EVFOFO Red Light Therapy Mask and packaging

Image 1: EVFOFO Red Light Therapy Mask with its packaging.

2. Safety Information

  • Do not use if you are pregnant, breastfeeding, or have a history of skin cancer.
  • Consult a physician before use if you have any pre-existing medical conditions, are taking photosensitizing medications, or have any concerns about light therapy.
  • Avoid direct eye contact with the LED lights. Always use the provided eye protection pads.
  • Keep the device dry. Do not immerse in water or use in wet environments.
  • Keep out of reach of children.
  • Discontinue use if you experience any discomfort, irritation, or adverse reactions.

3. Package Contents

Verify that all items are present in your package:

  • 1x EVFOFO Red Light Therapy Mask
  • 1x Instruction Manual
  • 2x Eye Protection Pads
  • 2x Adjustable Straps
  • 1x USB Type-C Charging Cable
Contents of the EVFOFO Red Light Therapy Mask package including mask, instructions, eye pads, adjustable straps, and charging cable.

Image 2: All components included in the EVFOFO Red Light Therapy Mask package.

4. Setup and Assembly

  1. Charge the Device: Before first use, fully charge the mask using the provided USB Type-C charging cable. The charging port is located on the top of the mask's control unit.
  2. Attach Eye Protection Pads: Insert the eye protection pads into the designated holes around the eye areas on the mask. These ensure comfort and protect your eyes during use.
  3. Attach Adjustable Straps: Secure the adjustable straps to the sides of the mask. These straps allow for a comfortable and secure fit on your face.
Close-up of the EVFOFO Red Light Therapy Mask showing the silicone cover, eye protection pad, Type-C charging port, and one-button control.

Image 3: Detailed view of mask components including charging port and eye protection pads.

Video 1: Demonstration of unboxing and assembly of the EVFOFO Red Light Therapy Mask, including attaching eye cushions and straps.

5. Operating Instructions

  1. Cleanse Your Face: Ensure your face is clean and dry before using the mask.
  2. Wear the Mask: Place the mask on your face and adjust the straps for a comfortable fit. The eye protection pads should align with your eyes.
  3. Power On and Select Light: Long press the button located on the top of the mask's control unit to turn it on. The default light is typically red. Short press the button to cycle through the 7 different LED light colors.
  4. Treatment Duration: Use the mask for 10-15 minutes per session. The device is designed to automatically turn off after approximately 10 minutes.
  5. Post-Treatment Care: After each session, remove the mask and apply your preferred moisturizer or serum to hydrate your skin.
Four easy steps for using the EVFOFO Red Light Therapy Mask: cleanse face, put on mask and choose color, lie down and enjoy, show confidence.

Image 4: Visual guide for the 4 easy steps to use the mask.

LED Light Color Functions:

  • Red Light (630nm): Helps reduce wrinkles, repair damaged skin, and minimize pores.
  • Blue Light (470nm): Aids in reducing acne inflammation and targeting acne-causing bacteria.
  • Green Light (520nm): Neutralizes and balances skin, reduces oil secretion, and helps balance water-to-oil ratios.
  • Yellow Light (590nm): Improves cellular oxygen exchange, replenishes, and energizes skin.
  • Purple Light: Combines red and blue light benefits, assisting in skin repair and acne treatment.
  • Cyan Light: Helps increase cellular energy and supports skin metabolism.
  • White Light: Penetrates deep into the skin, accelerates active tissue growth, and helps with pigmentation, fine lines, and sagging skin.
Diagram showing the 7 different LED light colors of the mask and their corresponding wavelengths and benefits.

Image 5: Overview of the 7 LED light colors and their specific functions.

6. Maintenance

To ensure the longevity and hygiene of your EVFOFO Red Light Therapy Mask:

  • Cleaning: After each use, gently wipe the mask with a soft, damp cloth or an alcohol wipe. Ensure the device is powered off and unplugged before cleaning. Do not use abrasive cleaners or submerge the mask in water.
  • Storage: Store the mask in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.

7. Troubleshooting

  • Mask not turning on: Ensure the mask is fully charged. Long press the power button to activate.
  • Lights not changing: Short press the power button to cycle through the different light colors. If still unresponsive, try recharging the device.
  • Discomfort during use: Ensure the eye protection pads are correctly positioned. Adjust the straps for a looser fit if necessary. Discontinue use if discomfort persists.

8. Specifications

  • Brand: EVFOFO
  • Model: B0DWXBTXHS
  • UPC: 730967955302
  • Number of LED Colors: 7
  • Power Source: 1 Lithium Ion battery (rechargeable via USB Type-C)
  • Package Dimensions: 13.3 x 10.12 x 1.77 inches
  • Weight: 1.54 Pounds
  • Manufacturer: Shenzhen Liyoutong Technology Co., Ltd.

9. Warranty and Support

For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official EVFOFO website. Keep your purchase receipt for warranty claims.

© 2025 EVFOFO. All rights reserved.