amicura MultiCare 3-in-1 Bedside Commode Shower Chair

1. Introduction

The amicura MultiCare Commode Chair is a versatile 3-in-1 solution designed to provide support and convenience for individuals with mobility needs. It can be used as a bedside commode, a shower chair, or a raised toilet seat, adapting to various daily routines in both the bedroom and bathroom environments.

This manual provides essential information for the safe and proper assembly, operation, and maintenance of your amicura MultiCare Commode Chair. Please read all instructions carefully before use.

2. Safety Information

• Maximum Weight Capacity: This chair is designed to support a maximum user weight of 300 lbs (approximately 136 kg). Do not exceed this limit.
• Ensure all parts are securely assembled and locked into place before each use.
• Always test the stability of the chair before transferring weight onto it.
• Use on a flat, stable, and non-slip surface.
• Do not stand on the chair.
• Keep children away from the chair during assembly and use.
• Regularly inspect the chair for any signs of wear, damage, or loose components. Discontinue use if any damage is found and contact customer support.

3. Product Components

Before assembly, ensure all the following components are present:

• Main Chair Frame (with backrest and seat)
• 4 Adjustable Legs with Non-Slip Rubber Feet
• 2 Liftable Armrests
• Detachable Anti-Splash Commode Bucket with Lid and Handle
• Toilet Paper Holder
• Soap Box
• Assembly Hardware (bolts, Allen wrench)

Figure 1: Product dimensions and weight capacity. The chair weighs 15.0 lbs and supports up to 300 lbs. Key dimensions include seat height (17.5" to 25.4"), seat width (19.3"), and overall height (28.3" to 36.2").

Figure 2: Detachable anti-splash commode bucket for easy disposal.

Figure 3: Sturdy non-slip rubber feet for enhanced stability.

4. Setup and Assembly

Follow these steps to assemble your amicura MultiCare Commode Chair:

1. Unpack Components: Carefully remove all parts from the packaging and verify against the components list.
2. Attach Legs: Insert each adjustable leg into the designated slots on the main chair frame. Ensure the spring pins snap securely into place.
3. Secure Armrests: Attach the liftable armrests to the sides of the chair frame using the provided bolts and Allen wrench. Ensure they are firmly secured.
4. Install Accessories: Attach the toilet paper holder and soap box to the designated points on the chair frame.
5. Insert Commode Bucket: Place the anti-splash commode bucket into the opening in the seat. Ensure it sits flush and is stable.

Height Adjustment

The chair features 9 height adjustment levels to accommodate different users and toilet heights.

1. To adjust the height, press the spring pin on each leg.
2. Slide the leg up or down to the desired height.
3. Ensure the spring pin fully engages in one of the adjustment holes.
4. Repeat for all four legs, ensuring they are set to the same height for stability.

Figure 4: The chair offers 9 height adjustment increments, allowing customization for various user heights and uses.

5. Operating Instructions

5.1. As a Bedside Commode

Position the chair next to the bed for easy access. Ensure the commode bucket is securely in place. The liftable armrests can be raised to facilitate transfers from the bed to the chair.

Figure 5: Using the chair as a bedside commode, providing convenient access and support.

5.2. As a Shower Chair

Place the chair inside the shower area. The corrosion-resistant materials make it suitable for wet environments. The EVA padding provides comfort and is easy to clean. The liftable armrests assist with safe entry and exit from the shower chair.

Figure 6: The chair functions as a shower chair, offering stability and comfort in the shower.

5.3. As a Raised Toilet Seat

Adjust the chair's height to fit over your existing toilet. Remove the commode bucket before positioning the chair over the toilet. The chair provides additional height and support for easier sitting and standing.

Figure 7: The chair can be used as a raised toilet seat, providing support and security.

5.4. Liftable and Lockable Armrests

The armrests can be lifted independently to facilitate side transfers. To lift an armrest, press the release button and pivot the armrest upwards. Ensure it locks into the upright position. To lower, press the button again and pivot it down until it locks securely in place. This feature allows for easy transitions in and out of the chair with one hand.

Figure 8: The armrests are liftable and lockable, providing solid support during transfers.

5.5. Integrated Accessories

The chair includes a toilet paper holder and a soap box for added convenience, keeping essential items within reach.

Figure 9: Integrated soap box for convenience.

Figure 10: Integrated toilet paper holder for easy access.

6. Maintenance and Cleaning

• General Cleaning: Clean the chair regularly with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the materials.
• EVA Padding: The extra-soft, hygienic EVA padding is easy to clean. Wipe down with a damp cloth and mild disinfectant.
• Commode Bucket: The detachable anti-splash commode bucket should be emptied and cleaned after each use. It can be washed with soap and water or a suitable disinfectant.
• Corrosion Resistance: The chair is constructed from high-strength aluminum alloy and corrosion-resistant materials, making it suitable for wet environments. However, ensure it is dried thoroughly after use in the shower to prolong its lifespan.
• Non-Slip Feet: Keep the non-slip rubber feet clean and free of debris to maintain optimal grip.

7. Troubleshooting

• Chair feels unstable:
  • Ensure all four legs are adjusted to the same height and the spring pins are fully engaged.
  • Verify that all assembly bolts, especially for the armrests, are tightened securely.
  • Check that the chair is placed on a flat, even surface.
• Armrests do not lock securely:
  • Ensure the armrest is fully pivoted into position until you hear or feel a click, indicating the lock is engaged.
  • Inspect the locking mechanism for any obstructions or damage.
• Difficulty inserting/removing commode bucket:
  • Ensure the bucket is aligned correctly with the seat opening.
  • Check for any debris or foreign objects obstructing the fit.

8. Specifications

9. Official Product Video

10. Warranty and Support

For warranty information, product support, or to report any issues, please contact amicura customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You can also visit the official amicura store on Amazon for additional product information and support: amicura Store