Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your FEZIBO Electric Standing Desk. Designed to enhance comfort and productivity, this adjustable height desk allows seamless transitions between sitting and standing positions, promoting a healthier work environment.
Safety Information
- Ensure all components are securely fastened before use.
- Keep children and pets away from the desk during operation.
- Do not overload the desk beyond its specified weight capacity.
- Avoid placing liquids directly on the control panel or motor components.
- In case of malfunction, disconnect power and contact customer support.
- The anti-collision feature is designed to prevent damage; however, always ensure a clear path during height adjustments.
Package Contents
Before assembly, verify that all parts listed below are present. Refer to the assembly video for visual guidance on identifying components.
- Desktop (2 pieces)
- Steel Frames (Legs and crossbar)
- Leg Bases
- Motor and Control Panel
- Power Adapter
- Assembly Tools (Allen wrench, screwdriver)
- Screws, Dowels, and Brackets
- Cable Management Clips
- Headphone Hooks
Setup and Assembly
A comprehensive installation video is available to guide you through setting up your sit-stand desk with ease. The package includes all necessary assembly tools and detailed instructions for a seamless setup process. Most users can complete assembly in under 30 minutes.
Official installation video for the FEZIBO Electric Standing Desk. This video provides step-by-step visual guidance for assembling your desk.
Step-by-Step Assembly Overview:
- Unpack Components: Carefully remove all parts from the packaging. Use the packaging box as a soft surface to prevent scratches during assembly.
Image showing all components of the FEZIBO Electric Standing Desk laid out for assembly.
- Assemble the Frame: Attach the crossbar to the leg pillars. Ensure the motor is correctly oriented as shown in the video.
Diagram illustrating the simple three-part assembly of the desk: Desktop, Steel Frames, and Leg Bases.
- Attach Leg Bases: Secure the feet to the bottom of the leg pillars.
- Connect Desktop Pieces: Use the provided dowels and metal plates to join the two desktop pieces securely.
- Mount Desktop to Frame: Carefully place the assembled desktop onto the frame and secure it with screws.
- Install Control Panel and Motor: Attach the control panel and motor to the underside of the desk. Ensure all cables are connected correctly.
Image showing the underside of the desk with the motor and control panel attached, highlighting the clean cable management.
- Cable Management: Use the provided cable clips to organize and secure all wires for a tidy workspace.
- Attach Accessories: Install the headphone hooks as desired.
Operating Instructions
Height Adjustment:
The desk features an electric lifting system for effortless height adjustment. The height can be adjusted from 28.3 inches to 46.5 inches at a speed of 1 inch per second, with noise levels under 50 dB.
- Use the Up (^) and Down (v) arrow buttons on the control panel to manually adjust the desk to your desired height.
Memory Presets:
The control panel is equipped with three customizable memory presets (1, 2, 3) allowing you to save and recall your preferred sitting and standing heights with a single press.
- To Set a Memory Preset: Adjust the desk to your desired height using the arrow buttons. Press and hold one of the memory buttons (1, 2, or 3) until the display flashes or beeps, indicating the height has been saved.
- To Use a Memory Preset: Simply press the corresponding memory button (1, 2, or 3) to automatically move the desk to your saved height.
Close-up view of the intelligent control panel featuring an LED display, up/down arrows, and three memory height setting buttons.
Anti-Collision Feature:
The desk is equipped with an anti-collision system. If the desk encounters an obstacle during height adjustment, it will automatically stop and reverse slightly to prevent damage or injury.
Maintenance
- Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Cable Management: Periodically check and re-secure cables to prevent tangling or damage.
- Motor Care: The motor is designed for durability. Avoid obstructing its movement or attempting to disassemble it.
Troubleshooting
- Desk Not Responding: Check if the power cable is securely connected. Ensure the power outlet is functional.
- Reset Procedure: If the desk is unresponsive or behaving erratically, perform a reset. Press and hold the "DOWN" button for 5 seconds until the display shows "RST" or similar, then release. The desk will move to its lowest position and reset.
- Uneven Height: Ensure the desk is placed on a level surface. The adjustable feet can be used to fine-tune stability.
Specifications
| Brand | FEZIBO |
| Model | B0DWX4NMM1 |
| Product Dimensions | 40"W x 24"D x 27"H (Base Height) |
| Adjustable Height Range | 28.3" to 46.5" |
| Color | Black |
| Top Material Type | Wood (Laminated) |
| Base Material | Alloy Steel |
| Noise Level | Under 50 dB |
| Special Features | Electric Height Adjustment, 3 Memory Presets, Anti-Collision System |
| Assembly Required | Yes |
Warranty and Support
If you encounter any questions or warranty issues during assembly or use, our support team is ready to assist you promptly. Please refer to your purchase documentation for specific warranty terms and contact information.
