1. Introduction
Thank you for choosing the AUTOWIKI Roof Rack Assembly. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new roof rack. Designed specifically for the 2024 and 2025 Tesla Cybertruck, this modular 3-piece system enhances your vehicle's cargo capacity without requiring drilling or cutting.
Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
Image 1.1: AUTOWIKI Roof Rack Assembly on a Tesla Cybertruck and individual components.
2. Safety Information
Your safety and the safety of others are paramount. Always adhere to the following safety guidelines:
- Weight Capacity: Do not exceed the maximum load capacity specified for your vehicle's roof or the roof rack. Consult your Tesla Cybertruck owner's manual for specific roof load limits.
- Secure Cargo: Always ensure all cargo is securely fastened to the roof rack using appropriate tie-downs. Loose cargo can shift during transit, causing damage or injury.
- Regular Checks: Periodically check all mounting hardware and fasteners to ensure they remain tight, especially after driving on rough terrain or after the first few uses.
- Vehicle Clearance: Be aware of the increased height of your vehicle when the roof rack is installed, especially when entering garages, car washes, or low-clearance areas.
- Driving Habits: Adjust your driving speed and habits when carrying cargo on the roof rack. High speeds, sudden braking, or sharp turns can affect vehicle stability.
- Installation: Follow all installation instructions carefully. Improper installation can lead to product failure and potential hazards.
3. Package Contents
Verify that all components are present before beginning installation:
- 2 x AUTOWIKI Roof Rack Cross Bars (Modular 3-piece design)
- All necessary mounting tools and hardware kits
Image 3.1: Included Roof Rack Cross Bars.
4. Installation Instructions
The AUTOWIKI Roof Rack is designed for straightforward installation onto your Tesla Cybertruck's OEM mounting points without the need for drilling or cutting.
4.1. Pre-Installation Checklist
- Ensure your vehicle is parked on a level surface and the parking brake is engaged.
- Gather all tools provided and verify all components are present.
- Clean the roof area where the rack will be mounted to ensure a secure fit.
4.2. Step-by-Step Installation
- Identify Mounting Points: Locate the OEM Tesla mounting points on your Cybertruck's roof. These are specifically designed for accessory attachment.
- Assemble Cross Bars (if necessary): The roof rack features a modular 3-piece design. If not pre-assembled, connect the sections of each cross bar as indicated in the diagram, ensuring all fasteners are snug.
- Position the Rack: Carefully place the assembled roof rack rails onto the designated OEM mounting points.
- Secure Mounting Brackets: Attach the mounting brackets to the vehicle's OEM mounting points using the provided hardware. Ensure the bolts are aligned correctly.
- Tighten Fasteners: Gradually tighten all bolts and fasteners, working in a cross-pattern if applicable, to ensure even pressure. Do not overtighten.
- Final Check: After tightening, gently shake the roof rack to confirm it is securely attached and stable. Re-check all fasteners after the first drive.
Image 4.1: Installation to OEM Tesla Mounting Points.
Image 4.2: Modular 3-Piece Design for Adjustment.
4.3. Important Considerations (Based on User Feedback)
- Mounting Bracket Washers: Some installations may benefit from using large flat washers between existing bolts and new brackets if the new brackets are thinner than original components, to ensure proper tightening.
- Frunk Button Panel: Be aware that removal of the factory bumper (if applicable for other accessories) might affect the lower clips of the frunk button panel. A thin foam strip or similar material may be needed to help the panel sit snugly.
- Front Camera Washer: If your vehicle has a spray washer for the front camera, the new bracket and bumper design may not accommodate it.
- Wheel Well Liners: Depending on other modifications or accessories, trimming approximately 2.5-3 inches of the front wheel well liners might be necessary if the new components do not extend as low or far back as OEM parts.
Image 4.3: Installation Effect - Before and After.
5. Operation
Once installed, your AUTOWIKI Roof Rack provides additional cargo space for your Tesla Cybertruck. Follow these guidelines for safe operation:
- Loading Cargo: Distribute weight evenly across the roof rack. Place heavier items at the bottom and center of the rack.
- Securing Cargo: Always use appropriate straps, nets, or other securing devices to prevent cargo from shifting or falling off during transit. Ensure straps are tight and checked periodically during long journeys.
- Aerodynamics: Large or irregularly shaped items can affect your vehicle's aerodynamics and fuel efficiency. Consider using cargo bags or boxes to streamline loads.
- Noise: Some wind noise may be experienced, especially with certain types of cargo or at higher speeds.
6. Maintenance
Regular maintenance will prolong the life and ensure the safe operation of your roof rack.
- Cleaning: Clean the roof rack regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the powder-coated finish.
- Inspection: Periodically inspect all components for signs of wear, damage, or corrosion. Check bolts and fasteners for tightness.
- Storage: If removing the roof rack for extended periods, store it in a dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
If you encounter issues with your AUTOWIKI Roof Rack, consider the following:
- Loose Components: If the rack feels loose, re-check all mounting bolts and fasteners for proper tightness. Refer to the installation section.
- Excessive Noise: Wind noise can sometimes be reduced by adjusting the position of the cross bars or by ensuring all cargo is securely fastened and streamlined.
- Fitment Issues: Double-check that the roof rack is correctly aligned with the OEM mounting points. Ensure no debris is obstructing the fit.
- Missing Parts: If any parts were missing upon delivery, contact AUTOWIKI customer support immediately.
8. Specifications
Key specifications for the AUTOWIKI Roof Rack Assembly:
| Feature | Detail |
|---|---|
| Brand | AUTOWIKI |
| Model Number | ASM-NCT01F101 |
| Item Weight | 43 pounds |
| Material | Heavy-duty Steel Q235A |
| Exterior Finish | Texture Powder Coated, Carbon Steel Coating, Electro-galvanized E-coating |
| Color | Black |
| Mounting Type | U-Bolt (Bolt-On to OEM points) |
| Automotive Fit Type | Vehicle Specific Fit (2024-2025 Tesla Cybertruck) |
Image 8.1: Deluxe Materials and Coatings.
9. Warranty and Support
AUTOWIKI provides a manufacturer warranty for 12 months from the date of purchase for this roof rack assembly.
If you encounter any problems or have questions regarding your product, please contact AUTOWIKI customer support. We aim to provide a friendly reply within 24 hours.
For the most up-to-date contact information, please refer to the official AUTOWIKI website or your purchase documentation.
