1. Product Overview
The Tyger Auto Tyger Access Running Boards are designed to provide a convenient and secure step for easier entry and exit from your vehicle. Constructed from durable carbon steel with a textured black finish, these running boards offer corrosion and rust resistance for various weather conditions.
This manual provides detailed instructions for installation, usage, maintenance, and troubleshooting for your Tyger Access Running Boards.
Image 1.1: The Tyger Auto Tyger Access Running Boards, featuring a textured black finish and integrated drop steps.
2. Fitment Information
These running boards are specifically designed for:
- Vehicle: 2024-2026 Toyota Tacoma
- Cab Type: Double Cab (4 full-size doors)
- Compatibility: Includes Hybrid models
Important: These running boards are NOT compatible with Access Cab (2 full-size front doors & 2 suicided rear doors) or Regular Cab (2 doors only) models.
Image 2.1: Visual guide to confirm your truck's cab type. Ensure your vehicle is a Double Cab with four full-size doors for proper fitment.
3. Setup and Installation
3.1. Included Components
Before beginning installation, verify that all components are present:
- Driver Side Running Board
- Passenger Side Running Board
- All necessary hardware and mounting brackets
- Installation Guide (this document)
3.2. Installation Steps
Installation is a direct bolt-on process and typically takes approximately 20 minutes. It is recommended to have assistance for easier handling and positioning of the running boards.
- Prepare Vehicle: Park your vehicle on a level surface and engage the parking brake.
- Identify Mounting Points: Locate the factory mounting points on the rocker panel beneath the vehicle's doors.
- Attach Brackets: Secure the provided mounting brackets to the vehicle's frame using the supplied hardware. Do not fully tighten at this stage.
- Position Running Board: Carefully lift and align the running board with the attached brackets.
- Secure Running Board: Attach the running board to the brackets using the remaining hardware.
- Adjust and Tighten: Adjust the running board for desired positioning and ensure it is level. Once satisfied, fully tighten all bolts and nuts securely.
- Repeat for Other Side: Follow the same steps for the opposite side of the vehicle.
Image 3.1: Tyger Access Running Board installed on a vehicle, demonstrating its appearance and integration.
4. Operating Instructions
The Tyger Access Running Boards are designed for straightforward use. To operate:
- Ensure the running boards are securely installed before use.
- When entering or exiting the vehicle, place your foot firmly on the anti-slip step surface.
- The anti-slip step design provides enhanced traction for safe entry and exit in various conditions.
Image 4.1: Detail of the 4-inch wide anti-slip step, designed for secure footing.
5. Maintenance
To ensure the longevity and appearance of your Tyger Access Running Boards, follow these maintenance guidelines:
- Regular Cleaning: Clean the running boards periodically with mild soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
- Inspection: Regularly inspect all mounting hardware for tightness. Re-tighten any loose bolts or nuts to maintain structural integrity.
- Finish Protection: The textured black finish is designed for excellent corrosion and rust resistance. However, promptly address any deep scratches or chips to prevent potential rust formation.
Image 5.1: Illustration of the superior rust resistance provided by Tyger's signature textured black finish, including pre-treatment and E-coating.
6. Troubleshooting
If you encounter any issues with your running boards, consider the following:
- Loose Feeling: If the running boards feel loose or unstable, re-check all mounting bolts and nuts. Ensure they are tightened to the manufacturer's specifications.
- Unusual Noises: Inspect for any contact points between the running board and the vehicle's undercarriage. Adjust positioning or re-tighten hardware as needed.
- Difficulty Installing: Refer back to the installation steps and diagrams. Ensure correct orientation of brackets and running boards. Verify vehicle fitment (Double Cab).
For persistent issues not resolved by these steps, please contact customer support.
7. Specifications
| Model Number | TG-AS2T24003 |
| Brand | Tyger Auto |
| Material | Carbon Steel |
| Exterior Finish | Textured Black Powder E-Coating |
| Item Dimensions (L x W x H) | 76.69 x 7.24 x 5.59 inches |
| Item Weight | 39.2 pounds |
| Weight Capacity | 500 pounds |
| Ground Clearance (approx.) | 15 inches |
| UPC | 810171270504 |
Image 7.1: Detailed dimensions of the Tyger Access Running Board.
Image 7.2: Key features of the running boards, including E-coating, pre-drilled holes, Tyger end caps, and 500 lb weight capacity.
8. Warranty Information
Tyger Auto provides a 5-year warranty for US customers against manufacturing defects for this product. Please retain your proof of purchase for warranty claims.
9. Support
For further assistance, technical support, or warranty inquiries, please visit the official Tyger Auto website or contact their customer service department through the retailer where the product was purchased.
You can find more information and contact details on the Tyger Auto Store on Amazon.
