Introduction
The UTRAI 5000A 150PSI Jump Starter with Air Compressor is a powerful and multi-functional device designed for roadside emergencies and everyday convenience. It combines a high-performance jump starter for 12V vehicles (up to 10.0L gas/diesel engines) with a built-in 150PSI air compressor, a portable power bank, and an LED flashlight. Engineered with 10 intelligent safety protections, this jump starter ensures reliable and safe operation in various conditions, from extreme cold to hot temperatures.
What's in the Box
- UTRAI JS-20 Car Booster Jump Starter x1
- Heavy Duty Jumper Cable x1
- Charging Cable x1
- Valve Connector x4
- Air Pump Hose x1
- Portable Storage Case x1
- User Manual x1
Product Overview
The UTRAI 5000A Jump Starter with all included accessories, neatly organized for portability.
The 5000A peak current jump starter is a savior for various 12V motor vehicles, including cars, SUVs, pickups, motorcycles, lawn mowers, and trucks.
The expeditious air compressor provides up to 150PSI, suitable for multiple inflation modes for various items.
The practical LED flashlight offers three modes: steady lighting, strobe, and SOS for emergency situations.
Setup
- Initial Charge: Before first use, fully charge the UTRAI Jump Starter using the provided charging cable via an external plug. The device supports 18W QC 3.0 input.
- Power On: Short press the power button on the device to turn it on and activate the display.
- Accessory Connection: For jump-starting, connect the heavy-duty jumper cables to the designated port. For air inflation, screw the air pump hose onto the device's inflation port.
Operating Instructions
Jump Starting a Vehicle
- Ensure the jump starter is adequately charged.
- Connect the red clamp of the jumper cable to the positive (+) terminal of the vehicle's battery.
- Connect the black clamp of the jumper cable to the negative (-) terminal of the vehicle's battery.
- Plug the jumper cable connector into the jump start port on the UTRAI device. The indicator light on the cable will show the connection status.
- If the vehicle's battery is extremely low, use the one-button boost mode (refer to the device's specific button for this function) to force a start.
- Start your vehicle. Once started, immediately disconnect the jumper cables from the UTRAI device, then from the vehicle battery.
Official product video demonstrating the jump-starting capabilities of the UTRAI 5000A Jump Starter.
Using the Air Compressor
- Connect the inflation hose to the vehicle's tire valve or the appropriate nozzle adapter for other inflatables. Tighten to avoid air leakage.
- The LCD screen will display the current tire pressure.
- Use the mode button (M/U) to select the desired inflation mode (car, motorcycle, bicycle, ball, or custom). Long press M/U to switch between BAR/KPA/PSI units.
- Use the '+' and '-' buttons to set your target pressure.
- Press the power button to start inflation. The compressor will automatically shut off once the preset pressure is reached.
Official product video demonstrating the air compressor function and tire inflation process.
Using as a Power Bank
- Connect your electronic devices (mobile phones, tablets, laptops, etc.) to the USB output ports (12W or 18W) on the UTRAI device.
- The device will begin charging your electronics efficiently.
Using the LED Flashlight
- Press the flashlight button to cycle through the three lighting modes: steady illumination, strobe, and SOS.
- Hold the flashlight button to turn the light off.
Maintenance
- Keep the device clean and free from dust and debris.
- Store the jump starter in its portable storage case when not in use to protect it from damage.
- Charge the device periodically (e.g., every 3-6 months) even if not used, to maintain optimal battery health and ensure it's ready for emergencies.
- Avoid exposing the device to extreme temperatures outside its operating range (-4°F to 140°F) for prolonged periods.
Troubleshooting
- Device Not Turning On: Ensure the device is charged. If the battery is completely depleted, allow it to charge for a period before attempting to power on.
- Vehicle Not Starting: Double-check that the jumper cables are correctly connected to the battery terminals (red to positive, black to negative). If the battery is extremely dead, use the one-button boost mode.
- Air Compressor Not Inflating: Verify that the inflation hose is securely attached to both the device and the valve. Ensure the correct pressure unit (PSI, BAR, KPA) and target pressure are set.
- Safety Protection Activation: The device has 10 intelligent safety protections (e.g., anti-spark, reverse connection, overcharge). If an error indicator lights up, refer to the user manual for specific error codes and troubleshooting steps.
Specifications
| Feature | Detail |
|---|---|
| Brand | UTRAI |
| Model | JS-20 |
| Peak Output Current | 5000 Amps |
| Air Compressor Pressure | 150 PSI |
| Engine Compatibility | All Gas / 10L Diesel (12V vehicles) |
| Battery Type | Lithium Polymer |
| Power Bank Capacity | 1000mAh (as stated in feature bullets, though this seems low for a jump starter) |
| USB Output 1 | 12W |
| USB Output 2 | 18W (QC 3.0) |
| USB Input | 18W (QC 3.0) |
| LED Light Modes | Steady, Strobe, SOS |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Dimensions | 8.28"D x 1.92"W x 4.24"H |
| Item Weight | 0.634 ounces |
Warranty & Support
UTRAI is committed to providing the best solutions for any auto problem on the road. While specific warranty details from the manufacturer are not provided in this manual, extended protection plans are available for purchase. For any product inquiries, technical support, or assistance, please refer to the contact information provided in your user manual or visit the official UTRAI website.
