OLIGHT IMINI 2 & I3T 2 EOS Flashlight User Manual

Introduction

This manual provides comprehensive instructions for the safe and effective use of your OLIGHT IMINI 2 EDC Rechargeable Keychain Flashlight and I3T 2 EOS Pocket Flash Light. Please read this manual thoroughly before operation and retain it for future reference.

What's in the Box

• OLIGHT IMINI 2 Flashlight
• OLIGHT I3T 2 EOS Flashlight
• AAA Alkaline Battery (for I3T 2)
• User Manual

Image: The OLIGHT IMINI 2 (bottom, green) and OLIGHT I3T 2 EOS (top, black) flashlights included in the bundle.

Specifications

Setup

IMINI 2 Initial Setup

The IMINI 2 features an integrated USB plug for direct charging. Before first use, ensure the flashlight is fully charged.

Charging the IMINI 2:

1. Locate the integrated USB plug at the tail of the IMINI 2.
2. Insert the USB plug directly into any standard USB-A port (e.g., computer, wall adapter, car charger).
3. The flashlight will charge within approximately 60 minutes.

Image: The IMINI 2 flashlight with its integrated USB plug inserted into a laptop's USB port for charging.

I3T 2 EOS Initial Setup

The I3T 2 EOS comes with an included AAA alkaline battery. To install or replace the battery:

1. Unscrew the tail cap of the I3T 2 EOS flashlight.
2. Insert one AAA battery with the positive (+) end facing towards the head of the flashlight.
3. Screw the tail cap back on securely.

Note: The I3T 2 is also compatible with rechargeable AAA batteries, which can boost its maximum output to 300 lumens.

Operating Instructions

IMINI 2 Operation

The IMINI 2 features a unique magnetic activation system.

Turning On/Off:

• To turn the light ON, simply detach the flashlight body from its magnetic cap.
• To turn the light OFF, reattach the flashlight body to its magnetic cap.

Image: The IMINI 2 flashlight showing how it illuminates instantly when separated from its magnetic base.

Hands-Free Use:

The magnetic base of the IMINI 2 allows it to be attached to iron surfaces for convenient hands-free illumination.

Image: The IMINI 2 flashlight magnetically attached to a metal surface, providing hands-free lighting.

I3T 2 EOS Operation

The I3T 2 EOS is operated via its tail switch.

Turning On/Off and Mode Selection:

• Momentary On: Lightly press the tail switch for momentary illumination. Release to turn off.
• Constant On: Fully press the tail switch until it clicks for constant illumination. Press again to turn off.
• Mode Switching: Quickly press and release the tail switch (within 0.5 seconds) to cycle between Low and High modes. The flashlight can be initially powered on in your preferred low or high mode depending on your needs.

Image: The I3T 2 EOS flashlight demonstrating its high and low brightness modes in an outdoor setting.

Maintenance

• Keep the flashlights clean and dry. Wipe with a soft, damp cloth as needed.
• For the IMINI 2, ensure the USB plug is free of debris before charging.
• For the I3T 2, regularly check and replace the AAA battery as needed. Remove batteries if the flashlight will not be used for an extended period.
• Do not disassemble the flashlight head as this may damage the light and void the warranty.

Troubleshooting

Warranty and Support

OLIGHT products are manufactured with high-quality materials and craftsmanship. For specific warranty information and support, please refer to the official OLIGHT website or contact their customer service directly.

For returns or issues related to your purchase, please refer to the seller's return policy. The buybox winner indicates a 30-day refund/replacement policy.

Seller: Olight® Direct

OLIGHT Store: Visit the OLIGHT Store on Amazon