1. Introduction
Thank you for choosing the atomberg Renesa Halo Smart BLDC Ceiling Fan. This manual provides essential information for the safe installation, operation, and maintenance of your new ceiling fan. Please read these instructions carefully before installation and keep them for future reference.
2. Safety Information
- Ensure the power supply is disconnected before installation, cleaning, or maintenance.
- Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- The fan must be securely mounted to a ceiling structure capable of supporting its weight.
- Maintain a minimum clearance of 2.3 meters (7.5 feet) from the floor to the fan blades.
- Do not insert objects into the path of the rotating blades.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- Blade set (1 Unit)
- Remote (1 Unit)
- Motor box (1 Unit)
- Canopy set (1 Unit)
- Downrod (1 Unit)
- Shackle kit (1 Unit)
- Manual Leaflet & Warranty card (1 Unit)
4. Installation and Setup
The atomberg Renesa Halo Smart fan is designed for easy installation. Professional installation services are available if needed. Ensure the ceiling can support the fan's weight and that wiring is correctly handled.
4.1 Ceiling Compatibility
This fan is suitable for both standard ceilings and false/low ceilings. For low height or false ceilings, use the additional ceiling plate provided with the bottom canopy. For standard ceilings, use the top and bottom canopy set.
Image: Ceiling plate for low height or false ceilings (left) and sleek top canopy for standard ceilings (right).
4.2 Choosing the Right Fan Size
Select the appropriate fan sweep size based on your room dimensions for optimal air delivery.
Image: Fan sweep size guide. For example, a 1200mm fan is recommended for medium rooms (65-120 sq ft).
5. Operating Instructions
Your Renesa Halo Smart fan offers convenient operation through its universal Smart IR Remote, mobile app, and voice commands.
5.1 Remote Control
The included remote allows you to:
- Adjust fan speed (6 levels).
- Activate Boost Mode for maximum airflow.
- Set a Timer for automatic shut-off.
- Engage Sleep Mode for reduced speed and quiet operation.
5.2 LED Speed Indicator
The fan features an LED indicator that displays the current speed setting.
Image: The fan's design features a contrast ring, designer blades, and an LED indicator.
6. Smart Features
The Renesa Halo Smart fan offers advanced control options for enhanced convenience.
6.1 Atomberg Home Mobile App
Control your fan from anywhere using the Atomberg Home mobile application. The app allows you to:
- Adjust fan speed.
- Activate Boost, Timer, or Sleep Mode.
- Monitor usage, energy consumption, and savings.
Image: Control your fan via the Atomberg Home App, including voice commands and remote functions.
6.2 Voice Control (Alexa & Google Home)
Integrate your fan with Amazon Alexa or Google Home for convenient voice-activated control. Follow the instructions in the Atomberg Home app to link your fan to your preferred smart assistant.
6.3 IoT Platform Support
The fan supports integration with DIY and proprietary home automation platforms such as Homebridge, Home Assistant, Node-Red, ELAN, and Phynart.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your fan.
- Cleaning: Disconnect power before cleaning. Use a soft, damp cloth to wipe the fan blades and motor housing. Do not use abrasive cleaners or solvents.
- Blade Inspection: Periodically check that all blade screws are tight. Loose blades can cause wobbling and noise.
- General Check: Ensure the fan is securely mounted and there are no loose wires.
8. Troubleshooting
If you encounter issues with your fan, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power supply; Remote battery low; Incorrect wiring | Check circuit breaker; Replace remote batteries; Consult an electrician to check wiring. |
| Fan wobbles | Loose blades or mounting; Unbalanced blades | Tighten all screws; Ensure blades are balanced (refer to installation guide for balancing kit if needed). |
| Remote not working | Remote battery low; Obstruction between remote and fan sensor | Replace remote batteries; Ensure clear line of sight to the fan. |
| Unusual noise | Loose components; Motor issue | Check for loose screws or parts; If noise persists, contact customer support. |
For issues not listed here, please contact atomberg customer support.
9. Specifications
Key technical specifications for the atomberg Renesa Halo Smart 1200mm BLDC Ceiling Fan.
| Feature | Specification |
|---|---|
| Brand | atomberg |
| Model Name | Renesa Halo Smart |
| Electric Fan Design | Ceiling Fan |
| Power Source | Corded Electric |
| Product Dimensions (D x W x H) | 29.5D x 19.5W x 16.5H Centimeters |
| Special Features | Smart Fan, BLDC Motor with Remote, Low noise, Boost Mode, Timer, LED Speed Indicator |
| Controller Type | App Control, Remote Control, Voice Control |
| Number Of Speeds | 6 |
| Noise Level | 57 Decibels |
| Wattage | 32 Watts (at top speed) |
| Number of Blades | 3 |
| Air Flow Capacity | 115 Cubic Meters Per Minute |
| Speed | 850 RPM |
| Voltage | 220 Volts |
| Indoor Outdoor Usage | Indoor |
| Motor Type | Brushless DC (BLDC) |
| Material Type | Aluminium |
| Blade Length | 1200 Millimetres |
| Item Weight | 3.3 Kilograms |
| Country of Origin | India |
Image: Energy efficiency details for the BLDC motor, highlighting up to 65% power savings.
10. Warranty and Support
Your atomberg Renesa Halo Smart ceiling fan comes with a standard warranty and dedicated customer support.
10.1 Warranty Information
The fan includes a standard 2-year warranty. An additional 1-year warranty can be availed by registering your purchase on the official atomberg website. Please refer to the warranty card included in the package for detailed terms and conditions.
10.2 Customer Support
For any queries, technical assistance, or professional installation services, please contact atomberg customer support:
- Email: support@atomberg.com
- Toll-Free Number: 08448449442
- Manufacturer Address: Atomberg Technologies Pvt Ltd, Mind Space Shelters LLP/ Vithai Developers LLP, Gat No. 51-59, Village Bhamboli, Chakan, Pune, Maharashtra-410507, India.