1. Introduction
Thank you for choosing the Fanttik E2 Ultra Mini Electric Screwdriver and S1 NEX Studio Tool Kit. This comprehensive kit provides precision and power for a wide range of tasks, from delicate electronics repair to general household maintenance. The E2 Ultra is designed for intricate work with its precise torque control, while the S1 NEX Studio offers robust power and a versatile collection of tools for various applications. Please read this manual thoroughly before use to ensure safe and optimal operation of your tools.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the tools:
- Keep the tools away from water and moisture.
- Do not operate the tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Ensure the work area is well-lit and clear of obstructions.
- Use only the specified charging cables and adapters.
- Store tools out of reach of children.
- Do not attempt to disassemble or modify the tools.
- Wear appropriate personal protective equipment, such as safety glasses, when operating power tools.
3. Package Contents
3.1 Fanttik E2 Ultra Mini Electric Screwdriver
- E2 Ultra Electric Screwdriver
- Precision Bit Set (50 S2 Steel Bits)
- Magnetic Storage Case (RevoStor)
- Type-C Charging Cable
Image: Fanttik E2 Ultra Mini Electric Screwdriver with its 50-piece S2 steel bit set and magnetic storage case.
3.2 Fanttik S1 NEX Studio Electric Screwdriver Tool Kit
- S1 NEX Studio Electric Screwdriver
- 10 Bits and Bit Extension
- Claw Hammer
- Adjustable Spanner
- Long Nose Pliers
- Tape Measure
- Utility Knife
- 10 Hex Keys
- Storage Case with Pop-Up Mechanism
Image: All components of the Fanttik S1 NEX Studio Tool Kit, including the electric screwdriver, hammer, spanner, pliers, and various bits.
Image: The Fanttik S1 NEX Studio Tool Kit neatly stored within its black carrying case.
4. Setup
4.1 Initial Charging
Before first use, fully charge both electric screwdrivers. Connect the provided Type-C charging cable to the charging port on each screwdriver and plug the other end into a compatible USB power adapter (not included).
- The E2 Ultra has an 800mAh battery. A full charge provides extended usage.
- The S1 NEX Studio has a 2000mAh rechargeable battery.
- An indicator light will show charging status (e.g., green for fully charged).
Image: The Fanttik E2 Ultra Mini Electric Screwdriver being charged via its Type-C port, indicated by a green light.
4.2 Bit Installation
To install a bit, select the appropriate bit for your task. Insert the bit firmly into the magnetic chuck of the screwdriver until it is securely seated. Ensure the bit is fully engaged before operation.
5. Operating Instructions
5.1 Fanttik E2 Ultra Mini Electric Screwdriver
The E2 Ultra is designed for precision work on electronics and small devices.
- Power On/Off: Press and hold the power button to turn the screwdriver on or off.
- Torque Adjustment: The E2 Ultra features 5 gear torque adjustments, providing up to 0.6 N.m of electric torque. Adjust the torque setting based on the delicacy of the screws and materials to prevent overtightening or stripping.
- Operating Speed: The motor operates at 270 RPM for efficient and precise fastening.
- Direction Control: Use the directional buttons (usually indicated by arrows) to select forward (tighten) or reverse (loosen) rotation.
- Manual Mode: For stubborn screws or additional tightening, the E2 Ultra supports a manual mode with up to 3 N.m of torque.
Image: The Fanttik E2 Ultra in use, demonstrating its 0.6 N.m maximum electric torque for precision tasks.
Image: The Fanttik E2 Ultra operating at 270 RPM, suitable for speedy and precise fastening on electronic components.
5.2 Fanttik S1 NEX Studio Electric Screwdriver
The S1 NEX Studio electric screwdriver is part of a versatile tool kit for general maintenance and repair.
- Power On/Off: Use the designated switch to turn the screwdriver on or off.
- Torque Adjustment: This screwdriver features three-stage torque adjustment, with a strong maximum torque of up to 6 N.m. Select the appropriate torque setting for the task to avoid damage.
- Direction Control: Utilize the directional controls to switch between forward and reverse rotation.
Image: Details of the Fanttik S1 NEX Studio Cordless Screwdriver, highlighting its 3 torque settings, 6 N.m maximum torque, and 2000 mAh rechargeable battery.
5.3 Using Other S1 NEX Studio Tools
The S1 NEX Studio kit includes a variety of hand tools. Use each tool according to its intended purpose:
- Claw Hammer: For driving and pulling nails.
- Adjustable Spanner: For tightening or loosening nuts and bolts of various sizes.
- Long Nose Pliers: For gripping, bending, and cutting wires in tight spaces.
- Tape Measure: For accurate length measurements.
- Utility Knife: For cutting various materials. Handle with extreme care.
- Hex Keys: For tightening or loosening hexagonal socket screws.
Image: The Fanttik S1 NEX Studio Tool Kit case demonstrating its pop-up design for easy access to tools.
6. Maintenance
6.1 Cleaning
Wipe down the tools with a clean, dry cloth after each use. Do not use abrasive cleaners or solvents. Ensure no dust or debris accumulates in the bit chuck or charging ports.
6.2 Storage
Store the tools and bits in their respective cases in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the screwdrivers are fully charged before long-term storage to maintain battery health.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Screwdriver does not turn on. | Low battery. | Charge the screwdriver fully. |
| Bit slips or strips screw head. | Incorrect bit size or type. Torque setting too high/low. | Ensure correct bit is used. Adjust torque setting appropriately. Apply firm, steady pressure. |
| Screwdriver stops during operation. | Overload protection activated. Low battery. | Reduce load. Charge the screwdriver. |
| Charging indicator not working. | Faulty cable or adapter. Charging port obstructed. | Try a different Type-C cable and adapter. Clean the charging port. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Fanttik customer support.
8. Specifications
8.1 Fanttik E2 Ultra Mini Electric Screwdriver
- Electric Torque: Up to 0.6 N.m (5-gear adjustment)
- Manual Torque: Up to 3 N.m
- Motor Speed: 270 RPM
- Battery Capacity: 800 mAh
- Charging Port: Type-C
- Bit Compatibility: 5/32" Hex Shank
8.2 Fanttik S1 NEX Studio Electric Screwdriver
- Electric Torque: Up to 6 N.m (3-stage adjustment)
- Battery Capacity: 2000 mAh
- Charging Port: Type-C
8.3 General Specifications
- Brand: Fanttik
- Material: Alloy Steel
- Color: Black
- Head Style: Phillips, Flat, and various others (depending on bit set)
9. Warranty and Support
Fanttik products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Fanttik website. You may also contact Fanttik customer service directly through the retailer where the product was purchased.
Fanttik Innovation Direct
Seller ID: A30MIYRTO6RN4I
