MCombo PR635M1

MCombo 64.6" Wall Hugger Power Loveseat Recliner Sofa

Model: PR635M1

User Instruction Manual

1. Introduction

Thank you for choosing the MCombo 64.6" Wall Hugger Power Loveseat Recliner Sofa. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read it thoroughly before use and retain it for future reference.

2. Safety Instructions

  • Ensure all parts are correctly assembled before use.
  • Keep children and pets away from the reclining mechanism during operation.
  • Do not place hands or feet near moving parts to prevent injury.
  • Avoid standing on the footrest or backrest.
  • Do not exceed the maximum weight capacity of 350 lbs per seat.
  • Keep power cords away from heat sources, water, and sharp edges.
  • Unplug the power cord from the outlet before cleaning or if the product will not be used for an extended period.
  • Only use the provided power adapter.

3. Package Contents

Your MCombo Loveseat Recliner is shipped in 4 boxes. Please verify all components are present before beginning assembly.

Four cardboard boxes labeled Box 1, Box 2, Box 3, Box 4 for the MCombo Power Recliner Sofa.

Image: Packaging for the MCombo Power Recliner Sofa, indicating delivery in four separate boxes.

  • Left Base (1)
  • Right Base (1)
  • Left Armrest (1)
  • Right Armrest (1)
  • Left Backrest (1)
  • Right Backrest (1)
  • Power Adapter (2)
  • Cylindrical Pin (2)
  • Protective Gloves (2)
  • Instruction Manual (1)

4. Assembly Instructions

Assembly is tool-free and typically requires two people for efficiency. The loveseat comes in 4 boxes. Ensure a minimum door width of 20 inches for easy entry.

Step-by-Step Assembly:

  1. Base Assembly:
    Flip the bases forward so the pedals face downwards. Lift the grooved side of one base and slide the protrusion of the other base into the groove. Insert the cylindrical pin into the center hole to secure the bases together.
  2. Armrests Assembly:
    Remove any protective pieces. Align the brackets of the armrests with the clips on the sides of the bases and slide them into place until they click securely.
  3. Backrests Assembly:
    Align the backrest brackets with the base brackets and slide the backrests down until they are firmly seated.
  4. Connections:
    Connect the chair wiring from each seat to the corresponding power port. Connect the power adapter to the main power input and then to a wall outlet. Ensure the power switch is in the 'ON' position.
  5. Dust Cover:
    Attach the dust cover to the Velcro strap located at the bottom rear of the loveseat.

Video: Detailed assembly guide for the MCombo Wall Hugger Recliner Loveseat.

Diagram showing the three main steps of assembling the MCombo Loveseat: attaching bases, then backrests, then armrests.

Image: Visual guide for the assembly process, illustrating the connection of bases, backrests, and armrests.

Video: Instructions on how to disassemble a reclining sofa, useful for moving or storage.

5. Operating Instructions

Reclining Function:

Each seat features independent power reclining. Locate the control button on the side of the armrest. Press and hold the button to smoothly recline the backrest and extend the footrest to your desired position (from 108° to 145°). Release the button to stop at any angle. Press the button in the opposite direction to return to the upright position.

A person's hand operating the control button on the armrest of the MCombo loveseat to recline the seat.

Image: Close-up of the control button on the armrest, demonstrating individual seat control for reclining.

Wall-Hugging Feature:

The unique wall-hugging design allows the loveseat to fully recline with only 1.4 inches of clearance from the wall. The seat slides forward as it reclines, optimizing space in compact living areas.

The MCombo loveseat reclined with minimal space between its back and the wall, highlighting its wall-hugging feature.

Image: The loveseat reclined, showing the minimal 1.4-inch wall clearance required for full operation.

USB & USB-C Charging Ports:

Each seat is equipped with built-in USB and USB-C charging ports located on the control panel. Simply plug in your devices to charge them conveniently while relaxing.

Close-up of the control panel on the armrest, showing the USB-A and USB-C charging ports.

Image: The integrated control center with USB-A and USB-C charging ports for convenient device charging.

Video: Demonstrates the wall-hugging feature, dual controls, and built-in USB charging of the MCombo Wall Hugger Reclining Sofa.

Video: Overview of the Wall Hugger Power Recliner Sofa Series, showcasing features like the wall-hugging design, drop-down table, and LED lights (if applicable to other models in the series).

6. Maintenance

Cleaning:

  • Wipe clean with a dry cloth.
  • For spills, blot immediately with a clean, dry cloth. Avoid rubbing.
  • Do not use harsh chemicals or abrasive cleaners, as these may damage the fabric.
  • Regularly vacuum the fabric to remove dust and debris.

General Care:

  • Avoid direct sunlight to prevent fading.
  • Keep away from heat sources and excessive moisture.
  • Periodically check all connections and fasteners to ensure they are tight.

7. Troubleshooting

If you encounter any issues with your MCombo Loveseat Recliner, please refer to the following common solutions:

ProblemPossible CauseSolution
Reclining mechanism not workingPower cord disconnected, power switch off, or power adapter malfunction.Ensure power cord is securely plugged into the wall and the loveseat. Check if the power switch (usually located near the power input) is in the 'ON' position. Test the wall outlet with another device.
USB ports not chargingLoveseat not powered on, or device cable issue.Verify the loveseat is powered on and the power switch is active. Try a different USB cable or device to rule out cable/device issues.
Unusual noise during recliningLoose components or obstruction in the mechanism.Inspect the reclining mechanism for any obstructions. Check and tighten any visible loose bolts or screws. If the noise persists, contact customer support.
Loveseat feels unstableBases not properly connected or backrests not fully engaged.Ensure the bases are securely connected with the cylindrical pins. Re-check that the backrests are fully slid into their brackets.

8. Specifications

FeatureDetail
BrandMCombo
Model NumberPR635M1 (6160-PR635M1)
Product Dimensions (D x W x H)37.8"D x 64.6"W x 41.3"H
Item Weight199.5 Pounds
Weight Limit (per seat)350 Pounds
Seating Capacity2
Reclining Position Count3 (108° to 145°)
Furniture Wall Clearance1.4 Inches
Upholstery Fabric TypePolyester (OEKO-TEX Standard 100 certified)
Frame Material TypeWood (FSC-certified)
Seat Fill MaterialFoam (CertiPUR-US certified)
Additional FeaturesUSB & USB-C Charging Ports, Wall-Hugging Design, Easy Assembly
ColorDark Brown
Diagram showing the dimensions of the MCombo Loveseat Recliner, including height, width, depth, seat depth, and wall clearance.

Image: Detailed dimensions of the loveseat, including seat height, depth, and overall product measurements.

Logos for CertiPUR-US, OEKO-TEX Standard 100, and FSC Certified Wood, indicating product material certifications.

Image: Certifications for materials used in the loveseat, including CertiPUR-US foam, OEKO-TEX fabric, and FSC-certified wood.

9. Warranty

MCombo offers a 2-Year Limited Warranty covering the reclining mechanism, electrical parts, upholstery material, cushions, and the wood and metal frame. Please retain your proof of purchase for warranty claims.

10. Support

For further assistance, parts replacement, or warranty inquiries, please contact MCombo customer support. You can find contact information on the official MCombo website or through your retailer.

Visit the MCombo Store on Amazon for more information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.