Rampage OCTAGON C60
Contents
Rampage OCTAGON C60 CPU Cooler User Manual
Model: OCTAGON C60
1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Rampage OCTAGON C60 CPU Cooler. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
2. Safety Information
Always observe the following safety precautions:
- Ensure your computer system is powered off and unplugged from the wall outlet before installation.
- Handle components with care to avoid damage.
- Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to sensitive components.
- Keep out of reach of children.
- Do not attempt to modify the cooler or its components.
3. Package Contents
Verify that all items are present in the package:
- Rampage OCTAGON C60 CPU Cooler (Heatsink with pre-installed fans)
- Mounting Brackets for Intel LGA1700/1200/115X
- Mounting Brackets for AMD AM5/AM4
- Backplate (Universal)
- Mounting Screws and Standoffs
- Thermal Paste (Pre-applied or in a tube)
- User Manual (This document)
4. Product Overview
The Rampage OCTAGON C60 is a high-performance air-cooled CPU cooler designed for efficient heat dissipation. It features dual 12cm ARGB fans and compatibility with modern Intel and AMD sockets.

Figure 4.1: Front view of the Rampage OCTAGON C60 CPU Cooler, showcasing its dual 12cm ARGB fans and heatsink fins. The fans display a vibrant rainbow of colors.

Figure 4.2: Angled view of the cooler, highlighting the top cover design and the side profile of the heatsink and fans. The ARGB lighting is visible on the fan blades.

Figure 4.3: Rear angled view of the cooler, revealing the copper heat pipes extending from the base through the aluminum fins. The fan mounting clips are also visible.

Figure 4.4: Side view of the CPU cooler, emphasizing the thickness of the heatsink and the dual fan configuration. The fan frames are white, and the fins are silver.

Figure 4.5: Top-down view of the cooler, showing the decorative top plate with geometric patterns and the mounting holes for the heatsink. The white fan frames are visible on either side.
5. Setup and Installation
Follow these steps carefully for proper installation. The process may vary slightly depending on your CPU socket type (Intel or AMD).
5.1. Preparation
- Power off your computer and unplug it from the power outlet.
- Open your computer case.
- Remove any existing CPU cooler. Clean off old thermal paste from the CPU surface using isopropyl alcohol and a lint-free cloth.
- Identify your CPU socket type (e.g., Intel LGA1700, AMD AM5).
5.2. Intel LGA1700/1200/115X Installation
- Place the universal backplate on the rear side of the motherboard, aligning the holes with the CPU socket mounting holes.
- Insert the correct standoffs through the motherboard from the front, screwing them into the backplate until secure.
- Place the Intel mounting brackets onto the standoffs and secure them with the provided screws.
- Apply a small amount of thermal paste to the center of the CPU's integrated heat spreader (IHS) if not pre-applied on the cooler base.
- Carefully place the CPU cooler onto the CPU, aligning the mounting holes on the cooler's base with the bracket screws.
- Secure the cooler by tightening the spring-loaded screws in a diagonal pattern until snug. Do not overtighten.
- Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard.
- Connect the ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard (if available) or to a dedicated ARGB controller.
5.3. AMD AM5/AM4 Installation
- Remove the existing plastic retention clips from the motherboard's stock AMD backplate (keep the stock backplate in place).
- Screw the AMD standoffs into the stock backplate's mounting holes.
- Place the AMD mounting brackets onto the standoffs and secure them with the provided screws.
- Apply a small amount of thermal paste to the center of the CPU's integrated heat spreader (IHS) if not pre-applied on the cooler base.
- Carefully place the CPU cooler onto the CPU, aligning the mounting holes on the cooler's base with the bracket screws.
- Secure the cooler by tightening the spring-loaded screws in a diagonal pattern until snug. Do not overtighten.
- Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard.
- Connect the ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard (if available) or to a dedicated ARGB controller.
6. Operating Instructions
Once installed, the Rampage OCTAGON C60 CPU cooler operates automatically based on your motherboard's fan control settings.
- Fan Speed Control: The 4-pin PWM connection allows your motherboard to dynamically adjust fan speed based on CPU temperature, ensuring optimal cooling and noise levels. This can typically be configured in your motherboard's BIOS/UEFI settings or through motherboard-specific software.
- ARGB Lighting Control: If connected to a 3-pin 5V ARGB header, the lighting effects can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync). If connected to a dedicated controller, refer to the controller's manual for lighting adjustments.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your CPU cooler.
- Dust Removal: Periodically (every 3-6 months, or more frequently in dusty environments) use compressed air to blow dust out of the heatsink fins and fan blades. Ensure the fans do not spin rapidly during this process by holding them gently.
- Thermal Paste: It is recommended to reapply thermal paste every 2-3 years, or if the cooler is removed for any reason. Clean the CPU and cooler base thoroughly before reapplying.
- Fan Inspection: Check fan blades for any obstructions or signs of wear. Ensure fan cables are securely connected.
8. Troubleshooting
If you encounter issues with your Rampage OCTAGON C60 CPU Cooler, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fans not spinning or spinning slowly. |
|
|
| High CPU temperatures. |
|
|
| ARGB lighting not working. |
|
|
9. Specifications
| Feature | Detail |
|---|---|
| Model Name | OCTAGON C60 |
| Brand | Rampage |
| Fan Size | 2 x 120mm |
| Fan Speed | Up to 1800 RPM |
| Airflow | 57 CFM (Cubic Feet per Minute) |
| Lighting | ARGB (Addressable RGB) |
| Compatibility | Intel LGA1700/1200/115X, AMD AM5/AM4 |
| Type | Air Cooler |
10. Warranty and Support
Rampage products are designed for reliability and performance. For warranty information and technical support, please refer to the official Rampage website or contact your local retailer.
- Warranty Period: Please check your product packaging or the official Rampage website for specific warranty terms and duration.
- Technical Support: For installation assistance, troubleshooting, or product inquiries, visit the Rampage support page or contact their customer service.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.