Introduction
The Torjim 20'' x 20'' Professional Softbox Photography Lighting Kit is designed to provide versatile and high-quality illumination for various visual content creation needs. This kit is suitable for photography, video recording, live streaming, and portrait shooting, offering adjustable lighting to enhance your creative projects.
Key features include high-reflectivity PET fabric and a foldable nylon cover for soft, even light distribution, energy-efficient 85W LED bulbs with adjustable 3000-7500K color temperature, sturdy aluminum alloy tripod stands with independent locking knobs, and a 210° rotatable head for flexible angle adjustments.
What's in the Box
Your Torjim Softbox Photography Lighting Kit package includes the following components:
- 2 x 20"x20" Softboxes
- 2 x 85W 3000-7500K LED Bulbs
- 2 x 62-inch Tripod Stands
- 2 x Remote Controls
- 2 x Soft Diffusers
- 1 x Carry Bag
- 1 x User Manual
Figure 1: Contents of the Torjim Softbox Photography Lighting Kit.
Setup Instructions
- Unpack Components: Carefully remove all items from the packaging and verify that all listed components are present.
- Assemble Tripod Stand: Extend the legs of the tripod stand to form a stable base. Adjust the height of the stand using the independent locking knobs to your desired level. Ensure all knobs are securely tightened.
Figure 2: Adjustable height of the tripod stand.
- Attach Softbox to Stand: Mount the softbox assembly onto the top of the tripod stand. Secure it firmly using the provided attachment mechanism and tighten any locking screws.
- Open Softbox: Gently pull back on the spring-loaded section at the rear of the softbox until it clicks into place, expanding the softbox into its square shape.
- Install LED Bulb: Remove the protective cap from the 85W LED bulb. Carefully screw the bulb into the E26 socket located inside the softbox. Do not overtighten.
Figure 3: 85W LED Bulb features.
- Attach Soft Diffuser: For softer, more diffused light, attach the white soft diffuser to the front of the softbox using the Velcro strips along the edges.
- Connect Power: Plug the power cord into a suitable electrical outlet.
Operating Instructions
- Power On/Off: Use the inline switch on the power cord or the ON/OFF button on the remote control to turn the light on or off.
- Adjust Brightness: Use the 'Bright+' and 'Bright-' buttons on the remote control to increase or decrease the light intensity. The bulbs offer dimmable brightness from 0% to 100%.
- Change Color Temperature: Use the 'Warm' and 'Cold' buttons on the remote control to adjust the color temperature between 3000K (warm light) and 7500K (cold light). The 'Mode' button may cycle through preset color temperatures.
Figure 4: Color temperature and brightness adjustment options.
- Adjust Softbox Angle: The softbox features a 210° rotatable head. Loosen the adjustment knob on the stand, position the softbox to your desired angle, and then tighten the knob to secure it.
Figure 5: Softbox angle adjustment.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe down the softbox exterior, tripod stand, and LED bulbs. Avoid using abrasive cleaners or solvents.
- Storage: When not in use, disassemble the kit and store all components in the provided carry bag to protect them from dust and damage.
- Bulb Care: Handle LED bulbs with care. Ensure they are cool before handling or replacing.
Troubleshooting
- Light Not Turning On: Check all power connections, including the wall outlet and the inline switch. Ensure the LED bulb is securely screwed into its socket.
- Remote Control Not Working: Verify that the remote control has working batteries. Some users have reported remotes arriving without batteries or with dead batteries. Replace batteries if necessary.
- Unstable Stand: Ensure the tripod legs are fully extended and the locking knobs are tightened. Position the stand on a flat, stable surface.
- Uneven Lighting: Confirm that the soft diffuser is correctly attached to the front of the softbox.
Specifications
| Feature | Specification |
|---|---|
| Brand | Torjim |
| Model | 20in - 3 Color |
| Softbox Size | 20'' x 20'' |
| LED Bulb Wattage | 85W |
| Color Temperature | 3000-7500K (Daylight CFL) |
| Color Rendering Index (CRI) | 80 |
| Tripod Stand Height | Up to 62 inches (approx. 157 cm) |
| Softbox Rotation | 210° adjustable |
| Material | PET, Nylon (Softbox); Aluminum Alloy (Tripod) |
| Light Source Type | LED |
| Hardware Interface | Bluetooth 4.0 (for remote) |
| UPC | 705161183035 |
Warranty & Support
The Torjim Softbox Photography Lighting Kit comes with a 1-year warranty. For any product inquiries, technical support, or warranty claims, please refer to the contact information provided in your product packaging or visit the official Torjim website.
Extended protection plans are also available for purchase:
- 2-Year Protection Plan
- 3-Year Protection Plan
- Complete Protect (monthly renewal)
Please note that return policies are subject to the retailer's terms and conditions. For purchases made through Amazon, a 30-day refund/replacement policy applies.
