AnyTone AT-D168UV DMR Radio User Manual

Introduction

The AnyTone AT-D168UV is a versatile dual-band DMR radio designed for ham radio enthusiasts, police officers, and emergency responders. It supports both digital and analog modes, offering advanced features such as APRS for real-time location tracking, secure communication with AES256 and ARC4 encryption, and a user-friendly interface with a 1.77-inch color TFT screen. This manual provides comprehensive instructions for setting up, operating, and maintaining your AT-D168UV radio.

Figure 1: AnyTone AT-D168UV radio highlighting its dual-mode capability, color screen, channel capacity, and encryption features.

What's in the Box

Upon unboxing your AnyTone AT-D168UV, please verify that all the following components are present:

• AnyTone AT-D168UV DMR Radio
• 2pcs Li-ion Battery Pack (1800mAh and 2500mAh)
• Battery Charger (QBC-56L)
• Power Adapter (NA01, 5V/2A)
• TYPE C Cable (QT-0046, for program and charge)
• Antenna (12cm TX-0311)
• Instruction Manual
• Belt Clip (WWZZ-0029)
• Additional 38cm Antenna (TX-0313)

Figure 2: All components included in the AnyTone AT-D168UV package, including the radio, two batteries, charger, cables, antennas, and manual.

Product Overview and Components

Familiarize yourself with the various parts of your AT-D168UV radio to ensure proper operation.

Figure 3: Detailed diagram showing the location of key components such as the LCD, Antenna, Channel Switch, Power/Vol knob, LED Status Indicator, Menu key, Exit Key, Speaker, Microphone, PTT Button, PF1/PF2 Keys, and Speaker/Mic Jacks with Type-C port.

Key Components:

• LCD: 1.77-inch color TFT screen for displaying channels, contacts, and radio status.
• Antenna: For transmitting and receiving signals.
• Channel Switch: Used to select different channels.
• Power/Vol: Rotary knob for turning the radio on/off and adjusting volume.
• LED Status Indicator: Provides visual feedback on radio status (e.g., transmitting, receiving, charging).
• Menu Key: Accesses the radio's menu system.
• Exit Key: Exits current menu or function.
• Speaker: Outputs audio.
• MIC: Microphone for voice input.
• PTT Button: Push-to-Talk button for transmitting.
• [PF1] Key / [PF2] Key: Programmable function keys.
• Speaker/Mic Jacks: Ports for external speaker-microphone accessories.
• TYPE C (Program and charge): USB-C port for charging and programming the radio.

Setup

1. Battery Installation

1. Ensure the radio is powered off.
2. Align the battery pack with the battery compartment on the back of the radio.
3. Gently push the battery into place until it clicks securely.
4. To remove, slide the battery release latch (if present) and pull the battery away from the radio.

2. Antenna Attachment

1. Screw the antenna clockwise into the antenna connector on the top of the radio until it is finger-tight. Do not overtighten.

3. Charging the Battery

The AT-D168UV radio can be charged using the provided desktop charger or directly via the Type-C USB cable.

Figure 4: The radio can be charged directly via the Type-C cable or by placing it in the desktop charging cradle.

• Using the Desktop Charger:
  1. Connect the power adapter to the desktop charger and plug it into a power outlet.
  2. Place the radio (with battery installed) into the charging cradle. Ensure proper contact.
  3. The LED indicator on the charger will show the charging status (e.g., red for charging, green for fully charged).
• Using the Type-C Cable:
  1. Connect the Type-C cable to the radio's Type-C port.
  2. Connect the other end of the cable to the power adapter or a compatible USB power source.
  3. The radio's screen or LED indicator will show charging status.

Operating Instructions

1. Powering On/Off and Volume Adjustment

• Power On: Rotate the Power/Vol knob clockwise until you hear a click and the screen illuminates.
• Power Off: Rotate the Power/Vol knob counter-clockwise until you hear a click and the screen turns off.
• Volume Adjustment: Once powered on, continue rotating the Power/Vol knob to adjust the audio output level.

2. Channel Selection

• Use the Channel Switch on the top of the radio to cycle through available channels.
• Alternatively, use the keypad to directly input channel numbers or navigate through channel lists via the menu.

3. Transmitting and Receiving

• Receiving: When a signal is detected on the current channel, the radio will automatically output audio. The LED indicator may change color (e.g., green).
• Transmitting: Press and hold the PTT (Push-to-Talk) button on the side of the radio. Speak clearly into the microphone. Release the PTT button to stop transmitting and return to receive mode. The LED indicator will typically turn red during transmission.

4. Dual-Mode Operation (Digital + Analog)

The AT-D168UV automatically detects the signal type (DMR digital or analog) on a channel, allowing seamless compatibility with various radio networks. No manual switching is typically required for basic operation, but specific settings can be configured via the menu.

5. APRS Function

The radio supports Digital APRS TX/RX and Analog APRS TX for real-time location sharing. Refer to the detailed instruction manual (included in the box) for configuration of APRS settings, including beacon intervals and data formats.

6. Programming and Code Plug

The AT-D168UV supports simple code plug programming. A code plug is a file containing all the radio's settings, including frequencies, talk groups, contacts, and other configurations. This can be imported using dedicated programming software and the provided Type-C cable. Detailed instructions for programming are available in the full software manual.

7. Encryption Features

The radio is equipped with AES256 and ARC4 encryption capabilities for secure digital communication. Activation and management of encryption keys are performed through the radio's menu system or programming software.

Maintenance

1. Cleaning

• Wipe the radio's surface with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Ensure the Type-C port and speaker/mic jacks are free of dust and debris.

2. Battery Care

• Charge the battery fully before first use.
• Avoid overcharging or completely draining the battery for optimal lifespan.
• Store the radio and batteries in a cool, dry place when not in use for extended periods.

Troubleshooting

Specifications

Figure 5: Physical dimensions of the AnyTone AT-D168UV radio and its accompanying Li-ion batteries.

Warranty and Support

For warranty information and technical support, please refer to the official AnyTone website or contact their customer service directly. Details can typically be found in the full instruction manual included with your product or on the manufacturer's official support pages.

Manufacturer: Qixiang Electron Sciencs & Technology Co., Ltd

For further assistance, please visit the AnyTone Store on Amazon.