Onerbl AC-DC Adapter User Manual for iLive Soundbars

Introduction

This manual provides essential instructions for the safe and effective use of your Onerbl AC-DC Adapter. This power supply is designed to operate your compatible iLive soundbar device or charge its battery from standard electrical power outlets. It converts alternating current (AC) from the wall outlet into direct current (DC) required by your device. Please read this manual thoroughly before use and retain it for future reference.

Product Overview

The Onerbl AC-DC Adapter is a reliable power solution for various iLive soundbar models. It is engineered with quality materials to ensure compatibility and performance.

Key Features:

Input: 100-240V AC, 50/60Hz (Global compatibility)
Output: 18V DC, 2A (36W)
Compatibility: Specifically designed for iLive ITB183B, ITB382B, ITB283, ITB283B, iT123, iT123B Soundbars.
Safety Protections: Includes Over Voltage Protection and Over Heat Protection.
Durability: Tested units ensure great working condition.

Package Contents:

1 x Onerbl AC-DC Power Adapter

Image 1: The Onerbl AC-DC Adapter unit with its integrated power cord. The adapter features a standard US two-prong plug, and the DC output cable is coiled neatly.

Setup Instructions

Verify Compatibility: Ensure your iLive soundbar model (e.g., ITB183B, ITB382B, ITB283, ITB283B, iT123, iT123B) is listed as compatible with this 18V DC, 2A adapter.
Connect to Device: Locate the DC input port on your iLive soundbar. Carefully insert the DC output plug of the Onerbl adapter into this port. Ensure a secure connection.
Connect to Power Outlet: Plug the AC prongs of the Onerbl adapter into a standard 100-240V AC wall outlet.
Power On: Once connected, your soundbar should receive power. Refer to your soundbar's specific manual for power-on procedures.

AC-DC Adapter plugged into a wall outlet

Image 2: The Onerbl AC-DC Adapter securely plugged into a standard wall power outlet, demonstrating proper connection for power delivery.

Operating Instructions

The Onerbl AC-DC Adapter functions as a power supply for your iLive soundbar. Once properly connected, it continuously provides the necessary power for the device's operation or battery charging.

Ensure the adapter is always plugged into a functional wall outlet and securely connected to your soundbar for uninterrupted power.
The adapter is designed for indoor use only.
Disconnect the adapter from the power outlet when not in use for extended periods or during electrical storms.

Maintenance

Proper maintenance ensures the longevity and safe operation of your Onerbl AC-DC Adapter.

Cleaning: Disconnect the adapter from both the power outlet and your device before cleaning. Use a soft, dry cloth to wipe the adapter's surface. Do not use liquid cleaners or abrasive materials.
Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly coiling the cable to prevent damage.
Inspection: Periodically inspect the adapter and cable for any signs of damage, such as frayed wires, bent prongs, or cracks in the casing. If damage is observed, discontinue use immediately and replace the adapter.

Troubleshooting

If you encounter issues with your Onerbl AC-DC Adapter, refer to the following common troubleshooting steps:

Problem	Possible Cause	Solution
No power to device	Adapter not fully plugged in. Wall outlet is not active. DC plug not securely connected to device. Damaged adapter or cable.	Ensure adapter is firmly seated in the wall outlet. Test the wall outlet with another device. Verify the DC plug is fully inserted into the soundbar's port. Inspect adapter and cable for damage. If damaged, replace.
Adapter feels hot	Normal operation under load. Poor ventilation. Overload or internal fault.	Slight warmth is normal. Ensure adapter is in a well-ventilated area, not covered. If excessively hot, disconnect immediately and contact support.

If the problem persists after following these steps, please contact the seller or manufacturer for further assistance.

Specifications

Detailed technical specifications for the Onerbl AC-DC Adapter:

Feature	Detail
Brand	onerbl
Input Voltage	100-240V AC
Input Frequency	50/60Hz
Output Voltage	18V DC
Output Current	2A
Output Power	36W
Color	Black
Special Feature	Short Circuit Protection, Over Voltage Protection, Over Heat Protection
Manufacturer	Shenzhen Waweis Technology Co., Ltd

Image 3: This image illustrates the physical dimensions of the Onerbl AC-DC Adapter, showing its length of 3.1 inches, width of 2.1 inches, and thickness of 1.2 inches.

Label on Onerbl AC-DC Adapter showing input/output specifications

Image 4: A close-up view of the adapter's label, clearly displaying the model, input (100-240V AC, 50/60Hz), and output (18V DC, 2A) specifications, along with safety certifications and "INDOOR USE ONLY" caution. The cable length is indicated as 76 inches.

Safety Information

Please observe the following safety precautions to prevent injury or damage to the adapter and connected devices:

Indoor Use Only: This adapter is designed for indoor use in dry locations. Do not expose it to rain, moisture, or extreme temperatures.
Ventilation: Ensure adequate ventilation around the adapter during use. Do not cover it or place it in enclosed spaces that could restrict airflow.
Avoid Damage: Do not drop, disassemble, or attempt to repair the adapter. Avoid placing heavy objects on the cable or bending it sharply.
Power Source: Only connect the adapter to a power outlet within the specified voltage range (100-240V AC).
Children and Pets: Keep the adapter and its cable out of reach of children and pets.
Disconnect Safely: Always grasp the plug, not the cable, when disconnecting the adapter from the wall outlet.

Warranty and Support

For warranty information or technical support regarding your Onerbl AC-DC Adapter, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.