1. Introduction
This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your Fenge Dual Monitor Stand with Drawer. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.
Safety Information
- Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
- Assemble the unit on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly to avoid damaging the material.
- Place the monitor stand on a stable, level surface.
- Do not exceed the maximum load capacity of 99 lbs (45 kg).
- Keep small parts away from children.
2. Package Contents
Please verify that all components listed below are included in your package:
| Item | Description | Quantity |
|---|---|---|
| Top Shelf Panel | Main surface for monitors | 1 |
| Bottom Shelf Panel | Lower storage shelf | 1 |
| Side Support Frames | Metal frames for structural support | 2 |
| Middle Support Blocks | Internal wooden blocks for stability | 2 |
| Acrylic Drawers | Semi-transparent storage drawers | 2 |
| Hardware Pack | Screws, dowels, L-wrench, adhesive pads | 1 set |
3. Setup & Assembly Instructions
The Fenge Dual Monitor Stand is designed for quick and easy assembly. Follow these steps carefully:
Assembly Video Guide
Official Fenge Monitor Stand Assembly Video (Excludes Drawer Section). This video demonstrates the step-by-step process for assembling the main structure of the monitor stand.
Step-by-Step Assembly
- Prepare the Panels: Lay out the top and bottom shelf panels (labeled 1# and 2# in the video) on a clean, soft surface. Identify the pre-drilled holes.
- Attach Middle Support Blocks: Secure the two middle support blocks (labeled 3# in the video) to the top shelf panel using the provided screws and dowels. Ensure they are aligned with the pre-drilled holes.
- Connect Top and Bottom Panels: Carefully align the top shelf panel with the bottom shelf panel, ensuring the middle support blocks fit into their designated slots. Secure them using the appropriate screws.
- Install Side Support Frames: Attach the metal side support frames (labeled 5# in the video) to both ends of the assembled panels. Note that one side of the frame is slanted (front) and the other is vertical (back). Do not fully tighten the screws on the slanted side initially.
- Tighten All Screws: Once all components are in place, tighten all screws securely using the provided L-wrench. Ensure the stand is stable.
- Insert Drawers: Slide the two semi-transparent acrylic drawers into their designated compartments. The stand features a back panel behind the drawers to prevent them from sliding out easily.
- Apply Adhesive Pads: Attach the adhesive pads to the bottom of the metal feet to prevent scratching your desk surface and provide additional stability.
4. Operating Instructions
Your Fenge Dual Monitor Stand is designed to enhance your workspace ergonomics and organization.
Ergonomic Benefits
- The stand raises your screen by 5.4 inches, promoting an ergonomically correct viewing height. This helps alleviate neck and eye strain during prolonged use.
Storage and Organization
- Dual Monitor Support: The 42.5-inch length accommodates two monitors, providing a unified and elevated display area.
- Integrated Drawers: Utilize the two semi-transparent frosted acrylic drawers for storing small office supplies, pens, or personal items, keeping your desktop clutter-free.
- Under-Shelf Space: The 1.9-inch bottom space is ideal for securely storing keyboards, mice, notebooks, or other office essentials when not in use.
- Cable Management: An open compartment is integrated to help organize and route cables, maintaining a tidy workspace.
Product Overview Video
A brief overview of the Fenge Dual Monitor Stand with Drawer, highlighting its features and benefits in a typical workspace setting.
5. Maintenance
To ensure the longevity and appearance of your Fenge Dual Monitor Stand, follow these simple maintenance guidelines:
- Cleaning: The high-quality thickened MDF panel surface is waterproof and resistant to scratches and fingerprints. Wipe clean with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Weight Distribution: Distribute weight evenly across the top surface to maintain stability and prevent stress on any single point.
6. Troubleshooting
If you encounter any issues with your Fenge Dual Monitor Stand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly or unstable. | Loose screws or uneven surface. | Ensure all screws are tightened. Place the stand on a flat, level surface. |
| Drawers do not slide smoothly. | Obstruction or improper alignment. | Check for any items blocking the drawer path. Ensure drawers are inserted correctly. |
| Missing parts during assembly. | Packaging error. | Contact customer support with your purchase details and a list of missing parts. |
| Monitors exceed weight capacity. | Overloading the stand. | Remove excess weight. The maximum load capacity is 99 lbs (45 kg). |
7. Specifications
Detailed technical specifications for the Fenge Dual Monitor Stand:
| Feature | Detail |
|---|---|
| Product Dimensions (L x W x H) | 42.52 x 10.04 x 5.43 inches |
| Item Weight | 17.18 pounds |
| Material | Engineered Wood, Iron, Polycarbonate (PC) |
| Color | Brown |
| Load Capacity | 99 Pounds (45 kg) |
| Assembly Required | Yes |
| Special Feature | Drawer, Cable Management |
| Manufacturer | Fenge |
8. Warranty & Support
Fenge products are manufactured with quality and durability in mind. For specific warranty information, please refer to the warranty card included with your product or visit the official Fenge website.
Customer Support
If you have any questions, require assistance with assembly, or need to report a missing/damaged part, please contact Fenge customer support. Have your product model and purchase date ready for faster service.
- Online Support: Visit the Fenge official website for FAQs and contact options.
- Email Support: Refer to your product packaging or the Fenge website for the customer service email address.
