Feonase Queen Platform Bed Frame - Instruction Manual

Important Safety Information

Please read and understand all instructions before assembling and using this product. Failure to follow these instructions may result in injury or damage to the product.

• Keep all small parts away from children during assembly.
• Assemble the bed frame on a soft, non-abrasive surface (e.g., carpet) to prevent scratches.
• Ensure all bolts and screws are securely tightened before use. Check periodically and re-tighten as necessary.
• Do not use power tools for assembly as this may overtighten and damage components.
• Do not stand or jump on the bed frame.
• Distribute weight evenly across the bed frame. The maximum weight capacity is 800 lbs.

Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Upholstered Headboard x 1
• Metal Bed Frame x 1 (Side Rails, Center Support Beam)
• Wood Slats
• Installation Tools and Accessories (Screws, Bolts, Allen Wrench)
• Installation Manual (this document)

Image: Overview of all bed frame components and their dimensions. The image displays the headboard, side rails, footboard, and wooden slats, along with overall measurements for a Queen size bed.

Setup and Assembly Instructions

Assembly is designed to be straightforward and typically takes about 30 minutes with two people. Follow these steps carefully.

Step 1: Attach Headboard to Side Rails

1. Unpack the headboard and side rails.
2. Align the pre-drilled holes on the headboard with the corresponding holes on the side rails.
3. Securely fasten using the provided bolts and Allen wrench. Do not overtighten.

Step 2: Assemble Footboard and Connect to Side Rails

1. Attach the footboard to the other end of the side rails using the provided hardware.
2. Ensure all connections are snug but allow for minor adjustments before final tightening.

Step 3: Install Center Support Beam and Legs

1. Attach the center support beam to the designated brackets on the headboard and footboard.
2. Screw the support legs into the center support beam. Adjust leg height if necessary to ensure even contact with the floor.

Image: Detailed view of the metal cross support system and strong metal connections that enhance the bed frame's stability and durability.

Step 4: Place Wooden Slats

1. Unroll or place the wooden slats across the bed frame. Many slats are connected by Velcro for quick assembly.
2. Ensure slats are evenly spaced and secured to the side rails or center beam as indicated in the specific hardware.
3. The EVA muting bar on the slats helps minimize noise and prevents mattress sliding.

Image: Illustrates key assembly features including Velcro-fastened slats for quick setup, mute bars for noise reduction, and protective foot pads to prevent floor damage and squeaks.

Step 5: Final Tightening

1. Once all components are in place, go back and fully tighten all bolts and screws.
2. Ensure the bed frame is stable and level.

Assembly Video Guide

Operating Instructions

This platform bed frame is designed for use without a box spring.

• Mattress Placement: Carefully place your mattress directly onto the wooden slats.
• Recommended Mattress Thickness: For optimal comfort and aesthetics, a mattress thickness of 8 to 12 inches is recommended.
• Under-Bed Storage: The design provides ample space underneath for storage containers.

Image: View of the bed frame from the side, highlighting the clearance underneath the bed, suitable for storing various items.

Maintenance

Proper care will extend the life and appearance of your Feonase bed frame.

• Cleaning Fabric: For the upholstered headboard and frame, gently spot clean with a damp cloth and mild detergent if necessary. Blot dry immediately. Do not use harsh chemicals or abrasive cleaners.
• Cleaning Metal/Wood: Wipe metal and wood components with a soft, dry cloth.
• Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability and prevent squeaks.
• Floor Protection: The bed feet are equipped with floor guards to prevent scratches and noise. Ensure these remain in place.

Troubleshooting

Specifications

Warranty and Support

For warranty information, missing parts, or any questions regarding your Feonase Queen Platform Bed Frame, please contact the manufacturer directly through their official website or the retailer where the product was purchased.

Visit the Feonase Store on Amazon for more information.