1. Introduction
Thank you for purchasing the Daysnew DB100 Wireless TV Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity. Please read this manual thoroughly before use.
Image 1.1: Daysnew DB100 Wireless TV Headphones on their charging station.
2. Package Contents
Verify that all items are present in your package:
- Daysnew DB100 Wireless Headphones
- 2.4 GHz RF Transmitter Charging Stand
- Optical Audio Cable
- RCA Audio Cable
- 3.5mm AUX Audio Cable
- Power Adapter
- User Manual
Image 2.1: Headphones and charging stand, illustrating the main components.
3. Setup
The Daysnew DB100 headphones offer multiple connection options for various devices. Ensure the charging stand is connected to a power source using the provided power adapter.
3.1. Charging the Headphones
- Connect the power adapter to the charging stand and plug it into a wall outlet.
- Place the headphones onto the charging stand. The "CHARGE" indicator light on the stand will illuminate (e.g., green blinking) to indicate charging.
- A full charge takes approximately 5 hours. The indicator light will change (e.g., solid green) when charging is complete.
Image 3.1: Headphones correctly placed on the charging stand.
3.2. Connecting to a TV (RF Mode)
The RF transmitter provides a stable wireless connection for TV audio.
- Optical Connection (Recommended):
- Connect one end of the optical audio cable to the "OPTICAL IN" port on the charging stand.
- Connect the other end to the "OPTICAL OUT" port on your television.
- On your TV's audio settings, select "Optical" as the sound output and ensure the digital audio format is set to "PCM". Refer to your TV's manual for specific instructions.
- RCA Connection:
- Connect the RCA audio cable to the "AUDIO IN" ports (red and white) on the charging stand.
- Connect the other end to the corresponding "AUDIO OUT" ports (red and white) on your television.
- 3.5mm AUX Connection:
- Connect the 3.5mm AUX audio cable to the "AUDIO IN" port on the charging stand.
- Connect the other end to the 3.5mm headphone jack or audio out port on your television or other audio device.
Image 3.2: The charging stand positioned near a television, ready for connection.
Image 3.3: Example TV audio settings menu, highlighting "Optical" output and "PCM" format selection.
3.3. Bluetooth Connection
The headphones can also connect directly to Bluetooth-enabled devices like phones, iPads, or laptops.
- Ensure the headphones are powered on.
- Press and hold the Bluetooth/TV mode button on the left earcup until the indicator light flashes blue, indicating pairing mode.
- On your device, go to Bluetooth settings and select "Daysnew DB100" from the list of available devices.
- Once connected, the indicator light on the headphones will turn solid blue.
Image 3.4: Close-up of headphone earcups, illustrating control buttons and Bluetooth 5.3 capability.
4. Operating Instructions
4.1. Power On/Off
- To power on, press and hold the Power button on the right earcup for approximately 3 seconds.
- To power off, press and hold the Power button again for approximately 3 seconds.
4.2. Volume Control
- Use the Volume Up (+) and Volume Down (-) buttons located on the left earcup to adjust the listening volume.
- These headphones feature personal volume control, allowing you to adjust the audio independently of the TV's main volume.
4.3. Switching Between TV (RF) and Bluetooth Modes
- Press the "TV/BT" button on the left earcup to switch between the RF (TV) mode and Bluetooth mode.
- In RF mode, the signal indicator on the charging stand will typically be solid white.
- In Bluetooth mode, the indicator light on the headphones will be solid blue.
Image 4.1: User enjoying television with the Daysnew DB100 headphones.
Image 4.2: The headphones are suitable for various users, including seniors, providing clear and amplified sound.
5. Maintenance
- Clean the headphones and charging stand with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Store the headphones on the charging stand when not in use to keep them charged and ready.
- The memory foam ear cushions are designed for comfort and breathability. Periodically check them for wear and tear.
Image 5.1: Illustration of the comfortable and adjustable design features of the headphones.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound in TV mode. |
|
|
| No sound in Bluetooth mode. |
|
|
| Headphones not charging. |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | DB100 |
| Brand | Daysnew |
| Connectivity Technology | Wireless (2.4 GHz RF, Bluetooth 5.3) |
| Wireless Communication Range | Up to 30 meters (98 feet) in RF mode |
| Compatible Devices | Televisions, Phones, iPads, Laptops |
| Control Method | Push Button |
| Headphone Type | Over-ear (Circum-aural) |
| Ear Placement | Supra-aural |
| Special Features | Personal Volume Control, Memory Foam Ear Cushions, Easy Installation, Audio Synchronization |
| Battery Type | NiMH (Rechargeable) |
| Charging Time | Approximately 5 hours |
| Headphone Jack | 3.5mm |
8. Warranty and Support
The Daysnew DB100 Wireless TV Headphones come with a 1-year manufacturer's warranty.
For technical support, troubleshooting assistance, or warranty claims, please contact Daysnew customer service through the retailer where the product was purchased or refer to the contact information provided in your product packaging.
Please retain your proof of purchase for warranty purposes.
