ModernLuxe Velvet Upholstered Bed 160x200 cm - Instruction Manual

Important Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference. Failure to follow these instructions may result in injury or damage to the product.

• Ensure all parts are present and undamaged before beginning assembly.
• Assemble the bed on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly. Tighten all fasteners securely once assembly is complete.
• Regularly check all connections to ensure they remain tight.
• This bed is designed for indoor use only.
• Do not allow children to play on or around the bed during assembly.

Package Contents

Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.

• Headboard (1)
• Footboard (1)
• Side Rails (2)
• Center Support Bar (1)
• Wooden Slats (approx. 24-26 pieces)
• Support Legs (4 main, 2-3 for center bar)
• Hardware Pack (screws, bolts, washers, Allen key)

Setup and Assembly Instructions

Follow these steps carefully for proper assembly.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface. Refer to the parts list to ensure all items are present.
2. Attach Side Rails to Headboard and Footboard: Connect the side rails to the headboard and footboard using the provided bolts and washers. Ensure the connections are secure but do not fully tighten yet.
3. Install Center Support Bar: Attach the center support bar to the headboard and footboard brackets. Secure any additional support legs to the center bar if included.
4. Place Wooden Slats: Evenly distribute the wooden slats across the bed frame. Secure them to the side rails using the pre-drilled holes and screws, or by pressing them into place if they have plastic caps. Ensure the slats are firmly seated to provide adequate mattress support.

Side view of the ModernLuxe bed frame, illustrating the wooden slatted base and the support structure.


Front view of the ModernLuxe bed frame, highlighting the evenly spaced wooden slats for mattress support.

5. Final Tightening: Once all components are in place, go back and fully tighten all bolts and screws. Do not overtighten.
6. Attach Bed Legs: Screw the bed legs into the designated corners of the bed frame. Ensure they are tight and stable. The stable 20 cm high legs provide optimal support and ensure good air circulation under the bed.


Close-up view of the headboard attachment mechanism and the wooden slats, demonstrating the secure connection points.

Operating Instructions

This section provides guidance on using your ModernLuxe bed.

• Mattress Placement: Carefully place your 160x200 cm mattress onto the assembled slatted base. Ensure it is centered and lies flat.
• Weight Capacity: The bed is designed to support the weight of a standard mattress and two adults. Avoid exceeding this capacity to prevent damage to the frame or slats.
• Headboard Use: The thick upholstered headboard offers comfortable support for leaning back while reading or watching TV.

Maintenance

Proper care will extend the life and appearance of your bed.

• Velvet Upholstery Cleaning: For general cleaning, gently vacuum the velvet fabric with an upholstery attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, consult a professional upholstery cleaner. Avoid harsh chemicals or abrasive cleaners.
• Frame and Slats: Periodically check all bolts and screws to ensure they are tight. Retighten if necessary. Dust the frame with a soft, dry cloth.
• Air Circulation: The 20 cm high legs ensure good air circulation under the bed, which helps prevent humidity. Ensure the area under the bed is not completely blocked to maintain this airflow.

Troubleshooting

Common issues and their solutions.

• Bed is Wobbly: Check all bolts and screws. Ensure they are fully tightened. Make sure the bed is on a level surface.
• Squeaking Noises: Squeaking often indicates loose connections. Retighten all bolts and screws, especially those connecting the side rails to the headboard/footboard and the slats to the frame. Ensure the mattress is properly seated.
• Slats Falling Out: Ensure the slats are correctly installed and secured in their designated positions. If they are screw-fixed, check that all screws are tight.

Specifications

Detailed dimensions of the ModernLuxe Velvet Upholstered Bed, showing overall length, width, height, and specific measurements for the headboard and frame.

Warranty and Support

ModernLuxe products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the purchase documentation or contact your retailer. Keep your proof of purchase for any warranty claims.