Introduction
This manual provides essential information for the safe and efficient use of your Gettimore Inflatable Hose P6931. This hose is designed for rapid inflation and heating of inflatable hot tubs, ensuring a quick and convenient setup for your relaxation experience. Please read this manual thoroughly before use and retain it for future reference.
The P6931 inflatable hose is a crucial component for maintaining optimal performance of your inflatable spa. Its design focuses on broad compatibility, leak-proof operation, and durable construction.
Product Features
- Rapid Inflation: Specifically designed for quick inflation and heating of inflatable hot tubs.
- Wide Compatibility: Compatible with popular models such as Bestway, Coleman, and Intex hot tubs.
- Leak-Proof Design: Features threaded connectors and twist-lock technology to minimize air leaks during inflation.
- Durable Construction: Made from robust PVC plastic, ensuring long-lasting performance and resistance to wear and tear.
- Easy Installation: User-friendly design requires no special tools for installation or replacement.
Setup
Before connecting the inflatable hose, ensure that your hot tub's inflation port and the hose connectors are clean and free from debris. This will help ensure a secure and leak-free connection.
- Identify Connectors: Locate the threaded connectors on both ends of the inflatable hose and the corresponding ports on your hot tub and inflation pump (if applicable).
- Attach to Hot Tub: Align one end of the hose with the inflation port on your hot tub. Gently twist the connector clockwise until it is securely fastened. The twist-lock technology will help create a tight seal.
- Attach to Pump: Connect the other end of the hose to your inflation pump. Ensure this connection is also secure to prevent air leakage during operation.

Image: The inflatable hose securely connected to its adapter, demonstrating a proper setup.
No special tools are required for installation, making the setup process quick and straightforward.
Operating Instructions
Once the hose is securely connected to both your hot tub and the inflation pump, you can begin the inflation process.
- Activate Pump: Turn on your inflation pump according to its manufacturer's instructions.
- Monitor Inflation: Observe the hot tub as it inflates. The P6931 hose is designed for rapid air transfer.
- Check for Leaks: Periodically check the connections at both ends of the hose for any signs of air leakage. The leak-proof design minimizes this risk, but it's always good practice to verify.
- Complete Inflation: Continue inflation until the hot tub reaches the recommended pressure specified by its manufacturer. Do not overinflate.
- Disconnect: Once inflated, turn off the pump and carefully disconnect the hose from both the pump and the hot tub.

Image: The complete inflatable hose and adapter assembly.
This hose is also suitable for assisting with the heating process of compatible inflatable hot tubs by facilitating air circulation.
Maintenance
Proper maintenance will extend the lifespan of your Gettimore Inflatable Hose P6931 and ensure its continued efficiency.
- Cleaning: After each use, wipe down the hose with a damp cloth to remove any dirt or debris. For stubborn grime, a mild soap solution can be used, followed by a rinse with clean water. Ensure the hose is completely dry before storage.
- Inspection: Regularly inspect the hose for any signs of wear, cracks, or damage, especially around the connectors. While made of robust PVC, prolonged exposure to harsh conditions can cause degradation.
- Storage: Store the hose in a cool, dry place away from direct sunlight and extreme temperatures. Avoid kinking or sharply bending the hose during storage to prevent damage to its structure.
- Avoid Chemicals: Do not use harsh chemicals, abrasive cleaners, or solvents on the hose, as these can damage the PVC material.

Image: Detail of the hose's durable construction and connection point.
Troubleshooting
If you encounter issues while using your inflatable hose, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Air Leakage at Connection | Loose connection, damaged O-ring/seal, debris in threads. | Ensure connectors are tightly twisted and locked. Inspect seals for damage and replace if necessary. Clean threads of any debris. |
| Slow Inflation | Hose kinked, pump malfunction, partial blockage in hose. | Straighten the hose. Check your inflation pump's operation. Inspect the hose for any internal blockages. |
| Hose Does Not Fit | Incompatible hot tub model. | Verify your hot tub model is listed as compatible (Bestway, Coleman, Intex). Contact product support if unsure. |
If the problem persists after attempting these solutions, please contact customer support.
Specifications
| Attribute | Detail |
|---|---|
| Product Name | Inflatable Hose for Pool |
| Material | PVC Plastic |
| Color | As shown (Typically Black hose with Grey adapter) |
| Item Package Quantity | 1 |
| Product Dimensions | 20 x 20 x 5 cm |
| Item Weight | 84 Grams |
| Model Number | UMCB9338B1J7Z385N1K6566Q4 (P6931) |
| Manufacturer | Gettimore |
Warranty and Support
Specific warranty details for this product are not provided in this manual. Please refer to the product packaging or the retailer's website for information regarding warranty coverage and terms.
For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries about replacement parts, please contact Gettimore customer service through the retailer where the product was purchased.
Note: Always ensure you are using genuine replacement parts to maintain product integrity and safety.