JODSONE UV LED Nail Lamp Instruction Manual

1. Introduction and Overview

Thank you for choosing the JODSONE UV LED Nail Lamp. This device is designed for efficient and long-lasting gel nail curing, suitable for both home and salon use. Its lightweight and spacious design accommodates all types of gel, including LED gel and hard gel.

Key features include 30 LED light beads for fast curing, an intelligent automatic sensor, and three distinct timer modes for various applications.

Figure 1: Overview of the JODSONE UV LED Nail Lamp's features.

2. Setup

Before first use, ensure all packaging materials are removed. Connect the provided power adapter to the lamp and then to a suitable power outlet.

• Connect the power adapter cable to the input port on the back of the nail lamp.
• Plug the power adapter into a standard electrical outlet.
• The lamp is now ready for operation.

Figure 2: What's in the box: UV Nail Lamp, Power Adapter, Use Manual.

3. Operating Instructions

The JODSONE UV LED Nail Lamp features an intelligent sensor system and multiple timer settings for precise curing.

Automatic Sensor

The lamp is equipped with an intelligent sensing system. It will automatically turn on when you place your hand inside and turn off when you remove it. This provides convenient operation and energy saving.

Figure 3: Intelligent Sensor System in action.

Timer Settings

The lamp offers three preset timer settings:

• 5 seconds: Ideal for a thin coat of base gel.
• 30 seconds: Recommended for a thin application of colored gel.
• 60 seconds: Suitable for the final nail effect.

Note: For a more complete curing effect, it may be necessary to cure for 120 seconds, depending on the gel product.

Figure 4: Timer settings on the control panel.

Application Steps

1. Apply Base Gel: Apply a thin, even layer of base gel over the entire nail surface. Cure under the lamp according to the gel product's instructions (typically 5-30 seconds).
2. Apply Gel Polish: Apply a thin coat of colored gel polish, starting from the front edge of the nail, to avoid over-thickening and creasing. Cure under the lamp (typically 30-60 seconds).
3. Apply Gel Polish Again: Apply a second coat as needed for desired color intensity. Cure under the lamp.
4. Apply Top Coat: Apply a top coat evenly to enhance shine and durability. Cure under the lamp (typically 60-120 seconds).

Figure 5: Step-by-step guide for gel nail application.

Video Demonstration

Video 1: A brief demonstration of the JODSONE UV LED Nail Lamp's automatic sensor and timer functions.

4. Maintenance

To ensure the longevity and optimal performance of your nail lamp, follow these maintenance guidelines:

• Cleaning: Disconnect the power adapter before cleaning. Use a soft, dry cloth to wipe the exterior of the lamp. Do not use abrasive cleaners or solvents.
• Storage: Store the lamp in a cool, dry place away from direct sunlight and moisture when not in use.
• Handling: Avoid dropping the device or subjecting it to strong impacts, as this may damage the internal components or LED beads.

5. Troubleshooting

If you encounter any issues with your JODSONE UV LED Nail Lamp, please refer to the following common troubleshooting steps:

• Lamp Not Turning On: Ensure the power adapter is securely connected to both the lamp and a working electrical outlet. Check if the outlet is functional by plugging in another device.
• Gel Not Curing Properly: Ensure you are using UV/LED compatible gel polish. Verify that the correct timer setting is selected for the specific gel product. Apply thin, even coats of gel.
• Automatic Sensor Not Working: Ensure your hand is fully inserted into the lamp's opening to activate the sensor. Check for any obstructions blocking the sensor.

6. Specifications

7. Warranty and Support

For any questions or concerns regarding your JODSONE UV LED Nail Lamp, please consult our shop directly. We are committed to providing assistance and resolving any issues you may encounter in a timely manner.