FATORRI Console Table FT-ST1303-W Instruction Manual

1. Introduction

Thank you for choosing the FATORRI Console Table. This 55-inch modern entry table features three tiers of shelving, a durable metal frame, and a dark walnut finish, designed to enhance your living space. This manual provides detailed instructions for assembly, safe operation, and maintenance to ensure long-lasting enjoyment of your new furniture.

Image 1.1: The FATORRI 55-inch Console Table with three shelves, featuring a dark walnut finish and black metal frame.

2. Safety Information

Please read and understand all safety warnings before assembly and use. Failure to follow these instructions may result in injury or product damage.

• Wall Attachment: For enhanced stability and to prevent tipping, always use the provided wall attachment hardware to secure the console table to a wall.
• Weight Capacity: The tabletop can support up to 240 lbs (108 kg). Each lower shelf can support up to 160 lbs (72 kg). Do not exceed these weight limits.
• Placement: Place the table on a flat, level surface. Avoid placing heavy items on the edges of the shelves.
• Children: Keep children away from the assembly area. Do not allow children to climb on the table.

Image 2.1: Detail showing the anti-tip strap for wall attachment and pre-assembled plastic pads on the table legs to protect floors.

3. Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Top Shelf (1)
• Middle Shelf (1)
• Bottom Shelf (1)
• Left Side Frame (1)
• Right Side Frame (1)
• Metal Support Tubes (6)
• Assembly Hardware (screws, bolts, Allen wrench)
• Anti-tip Kit (wall anchors, strap, screws)
• Instruction Manual (1)

4. Setup and Assembly

Assembly typically takes around 30 minutes. Follow these steps carefully. All necessary tools are provided.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided parts list.
2. Attach Support Tubes to Shelves: Secure the metal support tubes to the underside of each shelf using the designated screws. Ensure they are centered and firmly attached.
3. Assemble Side Frames: Connect the left and right side frames to the shelves. Start with the bottom shelf, then the middle, and finally the top shelf. Ensure all screws are finger-tight at this stage.
4. Tighten All Connections: Once all shelves are connected to the side frames, place the table upright. Systematically tighten all screws with the provided Allen wrench. Do not overtighten.
5. Install Anti-tip Kit: Choose a suitable location against a wall. Attach the anti-tip strap to the back of the top shelf and secure the other end to the wall using the wall anchors and screws. This step is crucial for safety.

Image 4.1: Dimensional diagram of the console table, useful for understanding component orientation during assembly. Overall dimensions: 55.12" W x 12.60" D x 30.00" H.

Image 4.2: Illustration of the metal support tubes under each shelf and the X-shaped metal frame, highlighting structural stability and weight capacity.

5. Operating Instructions

The FATORRI Console Table is designed for versatile use in various rooms. Its three-tier design offers ample space for display and storage.

• Entryway Table: Use the top surface for keys, mail, or decorative items. The lower shelves can hold baskets for shoes or other entryway essentials.
• Sofa Table: Position behind a sofa to hold lamps, drinks, books, or remote controls.
• Display Shelf: Showcase decorative plants, photo frames, collectibles, or books on any of the three tiers.
• TV Stand: The sturdy top surface can accommodate a television, while the lower shelves can store media devices and accessories.

Image 5.1: The console table functioning as an entryway table, displaying lamps, candles, and books.

Image 5.2: The console table configured as a TV stand, holding a television and various media items on its shelves.

6. Maintenance

Proper care will help maintain the appearance and longevity of your console table.

• Cleaning: Wipe surfaces with a damp cloth, then immediately dry with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Spills: Clean spills immediately to prevent staining or damage to the wood finish.
• Heat and Moisture: Avoid placing hot items directly on the surface. Use coasters or protective pads. Protect from excessive moisture.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten as necessary.

7. Troubleshooting

If you encounter any issues with your FATORRI Console Table, refer to the following common solutions:

• Table is Wobbly: Ensure all screws are fully tightened. Check that the table is on a level surface. Adjust the pre-assembled plastic pads if necessary to compensate for uneven floors. Confirm the anti-tip kit is securely installed.
• Missing Parts: Double-check the packaging and compare with the 'Package Contents' section. If parts are genuinely missing, contact FATORRI customer support with your model number and purchase details.
• Difficulty Assembling: Review the assembly instructions carefully. Ensure components are oriented correctly. Do not force parts together. If issues persist, contact customer support.

8. Specifications

9. Warranty and Support

For warranty information or assistance with your FATORRI Console Table, please contact the seller directly. You may also find additional support and product details on the official FATORRI website.

Contact Information:

• Refer to your purchase documentation for specific seller contact details.
• Visit the FATORRI website: thefatorri.com (as noted in customer reviews, the website is 'thefatorri.com' not 'fatorri.com').