1. Introduction
Thank you for choosing the Gabba Goods Aura Premium Wireless Over-Ear Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
Image 1.1: Gabba Goods Aura Premium Wireless Over-Ear Headphones (Grey)
2. Safety Information
- Do not expose the headphones to extreme temperatures, humidity, or corrosive substances.
- Avoid dropping or subjecting the headphones to strong impacts.
- Do not disassemble or attempt to repair the headphones yourself. This will void the warranty.
- Keep the headphones away from children and pets.
- Listen at moderate volume levels to prevent hearing damage.
- Dispose of the battery and headphones according to local regulations.
3. Package Contents
Please check the package for the following items:
- Gabba Goods Aura Premium Wireless Over-Ear Headphones
- USB-C Charging Cable
- User Manual
4. Product Overview
Familiarize yourself with the headphone controls and ports:
Image 4.1: Headphone Controls and Ports
Control Functions:
- SD Card Slot: Insert a microSD card for direct audio playback.
- Power Button: Press and hold to turn headphones on/off. Activates pairing mode when held longer.
- Call Button: Manages phone calls (answer/end) and acts as a play/pause control for music.
- Volume + Button: Short press to increase volume. Long press to skip to the next track.
- Volume - Button: Short press to decrease volume. Long press to go to the previous track.
- Charging Port: USB-C port for charging the headphones.
- AUX In: 3.5mm audio input for wired connection (cable not included).
5. Setup
5.1 Charging the Headphones
- Connect the provided USB-C charging cable to the charging port on the headphones.
- Connect the other end of the cable to a USB power source (e.g., computer USB port, wall adapter).
- The LED indicator will show red during charging and turn off when fully charged.
- A full charge takes approximately 1.5 hours.
Image 5.1: Battery Life and Charging
5.2 Powering On/Off
- To Power On: Press and hold the Power Button for approximately 2 seconds until the LED flashes red and blue.
- To Power Off: Press and hold the Power Button for approximately 3 seconds until the LED turns off.
5.3 Bluetooth Pairing
- Ensure the headphones are fully charged and powered off.
- Press and hold the Power Button for approximately 5 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "Aura Headphones" from the list of found devices.
- Once connected, the LED will turn a steady blue. You are now ready to enjoy your music.
Image 5.2: Bluetooth Connectivity Range
6. Operating Instructions
6.1 Music Playback
- Play/Pause: Short press the Call Button.
- Next Track: Long press the Volume + Button.
- Previous Track: Long press the Volume - Button.
- Volume Up: Short press the Volume + Button.
- Volume Down: Short press the Volume - Button.
6.2 Phone Calls
- Answer/End Call: Short press the Call Button.
- Reject Call: Long press the Call Button.
- Redial Last Number: Double-press the Call Button.
6.3 FM Radio Mode
The headphones support FM radio playback. To activate:
- Turn on the headphones.
- Press the Power Button briefly to cycle through modes until you hear FM radio.
- Use the Volume + / - buttons to change stations.
6.4 SD Card Playback
Insert a microSD card (not included) into the SD Card Slot for direct audio playback. The headphones will automatically switch to SD card mode if a card with audio files is detected.
7. Maintenance
- Clean the headphones with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Store the headphones in a cool, dry place when not in use.
- Avoid prolonged exposure to direct sunlight or extreme temperatures.
- The headphones feature a foldable design for easy storage and transport.
Image 7.1: Ergonomic Design Features
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Low battery. | Charge the headphones for 1.5 hours. |
| Cannot pair with device. | Headphones not in pairing mode; device Bluetooth off; too far from device. | Ensure headphones are in pairing mode (flashing red/blue LED). Turn on Bluetooth on your device. Move headphones closer to your device (within 10 meters). Forget previous connections on your device. |
| No sound. | Volume too low; incorrect mode; device not playing audio. | Increase headphone and device volume. Ensure correct mode (Bluetooth, FM, SD Card). Check if audio is playing on your connected device. |
| Poor sound quality. | Weak Bluetooth signal; audio source quality. | Move closer to your device. Try a different audio source. |
9. Specifications
- Model Name: Gabba Goods Aura Headphones
- Model Number: GG-AUR-SLV
- Connectivity: Bluetooth 5.4
- Wireless Range: Up to 10 meters (33 feet)
- Speaker Unit: 40mm Dynamic Driver
- Impedance: 32 Ohms
- Frequency Range: 20Hz – 20kHz
- Battery: 150mAh Lithium-Ion (included)
- Playtime: Up to 6 hours
- Charging Time: Approximately 1.5 hours
- Charging Port: USB-C
- Control Method: Touch (Buttons)
- Special Features: Built-in Microphone, SD Card Playback, FM Radio, Sound Isolation, Foldable Design
- Weight: Approximately 1.3 pounds (0.59 kg)
- Water Resistance: Not Water Resistant
- UPC: 840286406819
10. Warranty and Support
Gabba Goods products are designed for quality and reliability. For warranty information or technical support, please refer to the official Gabba Goods website or contact their customer service directly. Keep your purchase receipt as proof of purchase.
For further assistance, visit: Gabba Goods Store on Amazon
