Mares Puck 4 Mission 2 Scuba Diving Computer Console User Manual
Model: 414431BK7
Introduction
This manual provides essential instructions for the proper setup, operation, and maintenance of your Mares Puck 4 Mission 2 Scuba Diving Computer Console. This integrated system combines the advanced Puck 4 dive computer with a reliable analog pressure gauge, designed to enhance your underwater safety and experience. Please read this manual thoroughly before using the device.
Image: The Mares Puck 4 Mission 2 Scuba Diving Computer Console, featuring a digital dive computer display at the top and an analog pressure gauge below, encased in a durable black console with a hose connection.
Setup
- Unpacking: Carefully remove the Mares Puck 4 Mission 2 console from its packaging. Inspect for any visible damage.
- Hose Connection: Connect the high-pressure hose from the console to the high-pressure port on your first stage regulator. Ensure the connection is secure and hand-tightened. Do not overtighten.
- Initial Power-On (Puck 4 Computer): The Puck 4 dive computer is typically pre-activated. If not, refer to the separate Puck 4 dive computer manual for specific power-on procedures.
- Pressure Check: Before your first dive, connect the regulator to a filled scuba tank and slowly open the tank valve. Observe the analog pressure gauge to confirm it displays the correct tank pressure. Check for any leaks at the hose connection.
- Attachment: Secure the console to your BCD using the two large eyelets provided on the thermoplastic elastomer construction. This prevents entanglement and ensures easy access during your dive.
Operating Instructions
Puck 4 Dive Computer Operation
The Puck 4 dive computer utilizes the Bühlmann ZH-L16C algorithm with customizable gradient factors. For detailed operation of the dive computer's functions, including dive mode selection, setting personal parameters, and reviewing dive logs, please consult the dedicated Mares Puck 4 Dive Computer manual. Key features include:
- Dive Modes: Air, Nitrox, Gauge, and Freedive modes.
- Display: Clear, segmented display for depth, time, no-decompression limits, and ascent rate.
- Bluetooth Connectivity: Connects to smart devices via the Mares app for data transfer and firmware updates.
- Battery Life: Designed for approximately 100 dives before requiring battery replacement.
Analog Pressure Gauge Operation
The analog pressure gauge provides real-time tank pressure readings. Its phosphorescent dial and color-coded features ensure visibility in various lighting conditions underwater.
- Reading Pressure: Observe the needle on the gauge to determine your remaining tank pressure. The gauge is calibrated in BAR.
- Safety Zone: The color-coded sections typically indicate reserve pressure (e.g., red zone) to alert you when your air supply is low. Always plan your dive to surface with adequate reserve air.
Maintenance
- Rinsing: After each dive, thoroughly rinse the console with fresh water to remove salt, sand, and chlorine. Ensure the protective cap is on the high-pressure hose connector during rinsing.
- Drying: Allow the console to air dry completely in a shaded area. Avoid direct sunlight, which can degrade materials.
- Storage: Store the console in a cool, dry place, away from direct sunlight and extreme temperatures. Do not store with chemicals or solvents.
- Battery Replacement (Puck 4 Computer): When the low battery indicator appears on the Puck 4 computer, replace the battery promptly. Refer to the Puck 4 manual or consult an authorized Mares service center for battery replacement to maintain water integrity.
- Annual Service: It is recommended to have your Mares Puck 4 Mission 2 console inspected and serviced annually by an authorized Mares technician. This ensures optimal performance and safety.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display on Puck 4 computer | Low or dead battery | Replace battery (refer to Puck 4 manual). |
| Inaccurate pressure gauge reading | Gauge malfunction or air in hose | Ensure hose is properly purged. If issue persists, seek professional service. |
| Water ingress into console | Damaged O-rings or improper assembly | Immediately cease use and take to an authorized Mares service center. |
| Bluetooth connectivity issues | Mares app not updated, device out of range, or computer in dive mode | Ensure Mares app is updated. Bring devices closer. Exit dive mode on computer. |
For issues not listed here, or if solutions do not resolve the problem, contact an authorized Mares service center.
Specifications
| Feature | Detail |
|---|---|
| Model Number | 414431BK7 |
| Product Dimensions (L x W x H) | 15 x 6 x 2 inches |
| Item Weight | 1.6 Pounds |
| Dive Computer Algorithm | Bühlmann ZH-L16C (with customizable gradient factors) |
| Connectivity | Integrated Bluetooth |
| Pressure Gauge Display | Analog, phosphorescent dial, color-coded (BAR) |
| Console Material | Thermoplastic Elastomer |
| Manufacturer | Mares |
| UPC | 194151130621 |
Warranty and Support
Specific warranty details for the Mares Puck 4 Mission 2 Scuba Diving Computer Console are not provided within this manual. For comprehensive warranty information, please refer to the official Mares website or contact your authorized Mares dealer. For technical support, service, or parts, please reach out to an authorized Mares service center.
