1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your GGGUOJINN PC-K800 Microphone and ICON Upod Pro Sound Card. Please read this manual thoroughly before using the product to ensure proper functionality and to maximize your recording experience. Keep this manual for future reference.
2. Package Contents
Carefully unpack your product and verify that all items listed below are present and in good condition. If any items are missing or damaged, please contact your retailer.
- PC-K800 Microphone (1 pc)
- Customized Shock Mount (1 pc)
- Customized Windscreen (1 pc)
- Portable Bag (1 pc)
- ICON Upod Pro Sound Card (1 pc)
- Charger for Sound Card (1 pc)
- USB Cable for Sound Card (1 pc)
- C-1 Audio Cable (1 pc)
- C-4 Audio Cable (1 pc)
Image 2.1: Complete package contents including the PC-K800 microphone, Upod Pro sound card, cables, and accessories.
3. Product Overview
3.1 PC-K800 Microphone
The PC-K800 is a professional-grade microphone designed for clear audio capture in studio recording, dubbing, and broadcasting applications. It features an auto-tone function for outstanding timbre and active noise reduction for pure, clear sound without interference.
Image 3.1: Front view of the PC-K800 microphone mounted on its shock mount with the windscreen attached.
Image 3.2: Bottom view of the PC-K800 microphone, highlighting the XLR output connector.
3.2 ICON Upod Pro Sound Card
The ICON Upod Pro is a 16-bit 48KHz USB recording interface, offering 2 mic-in/1 guitar-in and 2-out capabilities. It provides full-duplex recording and playback, making it suitable for professional audio production. Key features include:
- Innovative unique mic preamp with individual gain control.
- +48V phantom power equipped for condenser microphones.
- Built-in 16-DSP effects with control knob and two parameter adjustment knobs.
- 2 analog outputs on 1/4" TRS jacks or stereo output on 3.5mm phone connector.
- Built-in stereo RCA input with individual gain control.
- Attenuator function for automatic music fade-out when mic signal is present.
- Buttons for controlling mic signal dry/wet recording to PC and monitoring signal.
- Master volume control and two headphone outputs with individual volume control.
- USB2.0 compatible, USB bus-powered, plug-and-play (no driver installation needed for Mac OS, XP, Vista, Windows 7/8).
Image 3.3: Top panel of the ICON Upod Pro Sound Card, showing input gains, DSP controls, and master volume.
Image 3.4: Rear panel of the ICON Upod Pro Sound Card, displaying USB, 5V DC power, Line Out, Stereo Out, and RCA In ports.
4. Setup Instructions
Follow these steps to set up your microphone and sound card for optimal performance.
- Mount the PC-K800 Microphone: Attach the PC-K800 microphone to the customized shock mount. Secure the shock mount to a microphone stand (not included). Install the windscreen onto the microphone.
- Connect the Microphone to the Sound Card: Use the C-1 audio cable (XLR to 1/4" TRS or similar, depending on the specific cable provided) to connect the PC-K800 microphone's XLR output to one of the microphone input jacks on the ICON Upod Pro Sound Card. Ensure a secure connection.
- Connect the Sound Card to Your Computer: Use the provided USB cable to connect the ICON Upod Pro Sound Card's USB port to an available USB port on your computer. The sound card is USB bus-powered, but a charger is also provided for additional power stability if needed.
- Connect Headphones/Speakers: Connect your headphones to one of the 1/4" TRS headphone outputs on the sound card, or connect your studio monitors to the Line Out or Stereo Out ports using appropriate cables.
- Power On and Driver Installation: The sound card is plug-and-play for most operating systems (Mac OS, Windows XP/Vista/7/8) and typically does not require manual driver installation. Once connected, your computer should recognize the device automatically. Verify the sound card is selected as the input and output device in your computer's sound settings.
- Apply Phantom Power (if necessary): If using a condenser microphone like the PC-K800, ensure the +48V phantom power is activated on the ICON Upod Pro Sound Card for the connected microphone input.
5. Operating Instructions
This section details the basic operation of your GGGUOJINN PC-K800 Microphone and ICON Upod Pro Sound Card.
- Input Gain Control: Adjust the individual gain knobs for Mic/Guitar 1 and Mic 2 on the Upod Pro to set appropriate input levels. Monitor the input level indicators to avoid clipping (distortion).
- DSP Effects: The sound card features 16 built-in DSP effects. Use the DSP effect control knob to select an effect and the two DSP parameter adjustment knobs to fine-tune the effect's characteristics.
- Monitoring: Use the dedicated buttons to control the monitoring signal (dry/wet). This allows you to hear your input signal with or without effects directly through your headphones or speakers without latency.
- Recording to PC: Use the dedicated buttons to control whether the dry or wet (with effects) microphone signal is sent to your computer for recording.
- Master Volume: Adjust the master volume control on the top panel to control the overall output level to your speakers or main headphones.
- Headphone Volume: The two headphone outputs have individual volume controls, allowing separate level adjustments for two users.
- RCA Input: If using external audio sources via the RCA input, adjust its individual gain control.
- Attenuator Function: Activate the attenuator function button to automatically fade out background music when a microphone signal is detected, useful for live commentary or broadcasting.
6. Maintenance
Proper care and maintenance will extend the life of your equipment.
- Cleaning: Use a soft, dry cloth to clean the surfaces of the microphone and sound card. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.
- Storage: When not in use, store the microphone and sound card in a clean, dry environment, preferably in the provided portable bag or a protective case, away from extreme temperatures and humidity.
- Handling: Avoid dropping or subjecting the devices to strong impacts. Handle cables carefully to prevent damage to connectors and wiring.
- Power: Always disconnect the power supply and USB cable when the sound card is not in use for extended periods.
7. Troubleshooting
If you encounter issues, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from microphone |
|
|
| Distorted audio |
|
|
| Sound card not recognized by PC |
|
|
| No sound from headphones/speakers |
|
|
If the problem persists after trying these solutions, please contact customer support for further assistance.
8. Technical Specifications
8.1 ICON Upod Pro Sound Card
- Audio Resolution: 16-Bit, 48KHz
- Inputs: 2x Mic-In / 1x Guitar-In, Stereo RCA Input
- Outputs: 2x Analog Outputs (1/4" TRS), Stereo Output (3.5mm phone connector), 2x Headphone Outputs (1/4" TRS)
- Phantom Power: +48V (switchable)
- Effects: Built-in 16-DSP effects
- Connectivity: USB 2.0
- Power: USB bus-powered (with optional charger)
- Compatibility: Mac OS (Intel-Mac), Windows XP, Vista (32-bit/64-bit), 7 (32-bit/64-bit), 8 (32-bit/64-bit)
- Functionality: Full duplex, simultaneous record/playback
8.2 PC-K800 Microphone
- Type: Condenser Microphone
- Features: Auto tone, Active noise reduction
- Connectivity: XLR (requires phantom power)
9. Warranty and Support
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, troubleshooting assistance, or service inquiries, please reach out to the GGGUOJINN customer support team through your purchase platform or the official brand website.