BIUBLE 8000A Jump Starter with Air Inflator/Deflator Compressor User Manual

1. Important Safety Information

Please read all safety warnings and instructions carefully before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Do not operate the jump starter if it is damaged.
• Keep out of reach of children.
• Do not use the jump starter to start vehicles with non-12V battery systems.
• Ensure proper polarity connection when jump starting. Reverse connection can cause damage.
• Do not expose the product to rain or wet conditions.
• Do not store in temperatures exceeding 60°C (140°F) or below -20°C (-4°F).
• Avoid dropping or subjecting the product to strong impacts.
• Do not disassemble or modify the product.
• Wear eye protection when working with vehicle batteries.

The device incorporates 12 comprehensive protection features, including high/low voltage, high/low charging temperature, high/low discharging temperature, over charge, over discharge, short circuit, reverse connection, backcharge protection, and over current protection.

2. Product Overview

The BIUBLE 8000A Jump Starter is a multi-functional device designed for emergency vehicle starting, tire inflation, air deflation, and portable power bank use. It features an 8000A peak current, 150 PSI air compressor, 450L/min air blower, and a 24800mAh power bank with 65W fast charging.

The main unit of the jump starter is shown with its accessories, including the smart jumper cables, air hose, blower hose, various inflation nozzles, and a Type-C charging cable, all neatly arranged.

Package Contents:

• 1 × Jump Starter Unit
• 1 × Detachable Air Hose + 4 × Air Nozzles
• 1 × Detachable Blower Hose + 4 × Blower Nozzles
• 1 × Smart Jumper Cables
• 1 × Type-C Charging Cable
• 1 × Instruction Manual
• 1 × Portable EVA Carrying Case

3. Setup and Initial Charging

Initial Charging:

Before first use, fully charge the jump starter. The device features PD 65W two-way fast charging.

1. Connect the provided Type-C charging cable to the Type-C IN/OUT port on the jump starter.
2. Connect the other end of the cable to a compatible 65W PD wall charger (not included).
3. The LCD display will show the charging progress. A full charge from 0% to 80% can take approximately 1 hour.

The jump starter supports two-way 65W fast charging, allowing for rapid recharging of the unit and quick charging of external devices.

The device features a USB-A output for QC3.0 18W charging and a USB-C input/output for PD 65W fast charging, enabling efficient power delivery to various devices.

4. Operating Instructions

4.1. Jump Starting a Vehicle

This jump starter is capable of starting all gas engines and diesel engines up to 16L.

1. Ensure the jump starter is sufficiently charged (at least 50% battery recommended).
2. Insert the smart jumper cable plug firmly into the jump start port on the device.
3. Connect the red (+) clamp to the positive (+) terminal of the vehicle battery.
4. Connect the black (-) clamp to the negative (-) terminal of the vehicle battery.
5. Once connected, the smart cable indicator light will show a solid green if the connection is correct. If it shows red or flashes, check the connections.
6. Start your vehicle's engine.
7. Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect from the jump starter.

The jump starter is shown connected to a car battery, illustrating the process of jump starting a vehicle.

A visual guide demonstrating the three steps for jump starting a vehicle: connecting the cable to the jump starter, attaching the clamps to the car battery, and then starting the engine.

4.2. Using the Air Inflator (Tire Pump)

The built-in air compressor can inflate tires up to 150 PSI.

1. Screw the detachable air hose onto the air outlet port of the jump starter.
2. Attach the other end of the air hose to the tire valve.
3. Turn on the jump starter. The LCD display will show the current tire pressure.
4. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball).
5. Use the '+' and '-' buttons to set the target pressure.
6. Press the power button to start inflation. The pump will automatically stop when the target pressure is reached.
7. Disconnect the air hose from the tire and the jump starter.

The jump starter is depicted inflating a car tire, emphasizing its 150 PSI capability and efficient airflow for rapid inflation.

A visual guide demonstrating the simple three-step process for tire inflation: connecting the nozzle, selecting the mode, and pressing the power button to start.

4.3. Using the Air Deflator/Blower

The blower function is ideal for inflating and deflating air mattresses, pool floats, and other inflatables.

1. Long press the power button to turn on the device.
2. Short press the 'M' button to switch to the blower function.
3. Connect the detachable blower hose to the INFLATE port (for inflation) or DEFLATE port (for deflation) on the jump starter, tightening it in a clockwise direction.
4. Choose the appropriate nozzle from the included set and connect it to the end of the blower hose and the inflatable item.
5. Press the power button to start the blower.
6. Once inflation/deflation is complete, press the power button again to stop.

The device features dedicated air intake and outlet ports for the blower function, accompanied by four specialized nozzles for different types of inflatables, including air beds, boats, vacuum bags, and swimming rings.

A visual guide detailing the four steps to use the blower function: activating the function, connecting the air tube, selecting the correct nozzle, and initiating inflation.

4.4. Using as a Power Bank

The 24800mAh capacity and QC3.0/PD65W ports allow for charging of various electronic devices.

• Connect your device's charging cable to the USB-A OUT port (QC3.0 18W) or the Type-C IN/OUT port (PD 65W) on the jump starter.
• The jump starter will automatically begin charging your device.

The jump starter functions as a 24800mAh portable power bank, capable of charging smartphones and tablets via its USB-A QC3.0 and USB-C PD 65W ports.

4.5. Using the LED Light

The integrated LED light offers three modes for emergency situations.

• Long press the light button to turn on the flashlight mode.
• Short press the light button to cycle through SOS mode, Strobe mode, and then off.

The jump starter features an LED light with three emergency modes: standard flashlight, SOS signal, and strobe light, providing illumination and signaling capabilities.

5. Maintenance

Charging:

To maintain optimal battery life, it is recommended to fully charge the jump starter every 3-6 months, even if not in use. The device can maintain a charge for over 24 months in standby.

The jump starter is designed for extended standby, capable of holding a charge for up to 24 months, minimizing the need for frequent recharging when not in active use.

Storage:

• Store the jump starter in its portable EVA carrying case to protect it from dust and damage.
• Keep the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• Ensure all ports are clean and free of debris.

6. Troubleshooting

7. Specifications

8. Warranty and Support

BIUBLE is committed to providing excellent customer service and product reliability.

• Warranty: Enjoy a 3-year (36 months) warranty with free replacement for manufacturing defects.
• Return Guarantee: A 30-day return guarantee is provided.
• Technical Support: Lifetime technical support is available for this product.
• Customer Service: BIUBLE teams offer 24/7 customer support. If you have any questions or issues, please feel free to contact us. We aim to respond within 24 hours.

BIUBLE offers a 36-month free replacement warranty, 24-hour customer service, and lifetime technical support to ensure customer satisfaction.