Introduction
The Zeegma ZONDER Pro Aqua is a versatile 1400W wet and dry vacuum cleaner designed for comprehensive cleaning tasks. It combines dry vacuuming, wet vacuuming, and extraction functions, making it suitable for various surfaces including floors, carpets, upholstery, and vehicle interiors. This manual provides essential information for the safe and efficient use, maintenance, and troubleshooting of your appliance.
1. Setup and Assembly
Before first use, ensure all components are present and correctly assembled.
- Unpacking: Carefully remove all parts from the packaging.
- Wheel Installation: Attach the four swivel wheels to the base of the vacuum cleaner for mobility.
- Hose Connection: Connect the flexible suction hose to the designated inlet port on the main unit. Ensure a secure fit.
- Accessory Attachment: Select the appropriate nozzle for your cleaning task and attach it to the end of the suction hose or extension tube. The kit includes nozzles for upholstery, floors, and crevices.
- Filter Installation: For dry vacuuming, ensure the HEPA filter is securely in place. For wet vacuuming, the foam filter should be used to protect the motor from moisture.
- Water Tank Preparation (for wet cleaning): Fill the 4-liter clean water tank with water and an appropriate cleaning solution, if desired. The 20-liter metallic tank is for dirty water collection.
2. Operating Instructions
2.1. Dry Vacuuming
- Ensure the HEPA filter is installed and the foam filter is removed.
- Connect the desired dry vacuuming nozzle (e.g., floor brush, crevice tool).
- Plug the power cord into a suitable electrical outlet.
- Turn on the vacuum cleaner using the power switch.
- Vacuum the desired surface.
2.2. Wet Vacuuming and Extraction
This function is ideal for deep cleaning carpets, rugs, and upholstery.
- Ensure the foam filter is installed and the HEPA filter is removed.
- Fill the 4-liter clean water tank with water and a suitable cleaning solution.
- Attach the spray/extraction nozzle.
- Plug in the vacuum cleaner and turn it on.
- Press the spray button on the handle to dispense cleaning solution onto the surface.
- Move the nozzle slowly over the wet area to extract the dirty water. The transparent nozzle allows real-time monitoring of the cleaning process.
- Repeat as necessary until the surface is clean.
2.3. Blowing Function
The blowing function can be used to remove dirt from hard-to-reach areas or to accelerate the drying of surfaces after wet cleaning.
- Connect the hose to the exhaust port of the vacuum cleaner.
- Turn on the vacuum cleaner.
- Direct the airflow to the desired area.
3. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your Zeegma ZONDER Pro Aqua.
- Emptying the Dirty Water Tank: After wet vacuuming, always empty the 20-liter metallic dirty water tank. Use the drain plug for easy emptying.
- Cleaning the Metallic Tank: After wet use, it is crucial to thoroughly dry the metallic tank to prevent rust and corrosion.
- Filter Cleaning:
- HEPA Filter: For dry use, regularly tap out dust or rinse with water if heavily soiled. Ensure it is completely dry before reinstallation.
- Foam Filter: For wet use, rinse the foam filter with water after each use and allow it to air dry completely.
- Nozzle and Hose Cleaning: Rinse all nozzles and the suction hose with clean water after wet use to prevent blockages and odors.
- Motor Protection: The design includes features to protect the turbine and motor from moisture. Ensure filters are correctly installed for the chosen operation mode.
4. Troubleshooting
If you encounter issues with your vacuum cleaner, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No suction or weak suction |
|
|
| Water not spraying (during extraction) |
|
|
| Vacuum cleaner does not turn on |
|
|
| Unusual noise during operation |
|
|
5. Specifications
- Brand: Zeegma
- Model Number: ZE-ZONDER PRO AQUA SILVER
- Color: Silver
- Product Dimensions: 51 x 37 x 41 cm
- Weight: 7.3 kg
- Power: 1400 W
- Clean Water Tank Capacity: 4 Liters
- Dirty Water Tank Capacity: 20 Liters (Metallic)
- Noise Level: 87 Decibels
- Special Features: Wet and Dry Vacuuming, Anti-allergenic HEPA Filter, Blowing Function, Extraction Cleaning, Powerful 1400W Motor
- Filter Type: HEPA Filter, Foam Filter
- Hose Length: 350 cm
- Form Factor: Canister
6. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or contact Zeegma customer service directly. Keep your proof of purchase for warranty claims.
