Muddy Mitigator 2.0 Cellular Trail Camera User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your Muddy Mitigator 2.0 Cellular Trail Camera. This camera is designed for versatile and reliable performance, capturing high-quality photos and videos for outdoor monitoring. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

Figure 1.1: Muddy Mitigator 2.0 Cellular Trail Camera with accessories. This image displays the trail camera unit, a 16GB SD card, and a pack of AA batteries, all included in the combo package.

2. Package Contents

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact customer support.

• Muddy Mitigator 2.0 Cellular Trail Camera
• 16 AA Batteries
• 2 SD Cards
• Instruction Manual (this document)

Figure 2.1: Front view of the Mitigator 2.0 camera. This image shows the camera's front panel, including the lens, motion sensor, and display screen.

3. Setup Guide

3.1 Battery Installation

1. Open the camera housing latch.
2. Locate the 8-piece battery tray.
3. Insert 16 AA batteries into the tray, ensuring correct polarity (+/-).
4. Close the battery tray and secure the camera housing latch.

3.2 SD Card Insertion

1. With the camera housing open, locate the SD card slot.
2. Insert one of the provided SD cards into the slot until it clicks into place. Ensure the card is oriented correctly.

3.3 Initial Power On and Network Activation

1. Turn the camera's power switch to the ON position.
2. The camera will automatically detect the best cellular carrier (AT&T or Verizon) using the pre-installed SIM cards.
3. Follow on-screen prompts or refer to the Command PRO App for further activation steps.

3.4 Mounting the Camera

The Mitigator 2.0 features an integrated multi-position mount and a ¼-20 threaded insert for flexible mounting options.

• Use the included strap to secure the camera to a tree or post.
• For alternative mounting, utilize the ¼-20 threaded insert with compatible accessories (sold separately).
• Ensure the camera is positioned to capture the desired area, avoiding direct sunlight into the lens.

Figure 3.1: Proper camera placement on a tree. This image shows a person kneeling to adjust the trail camera, which is strapped to a tree trunk, demonstrating a typical setup scenario.

4. Operating Instructions

4.1 Key Features

• Photo Resolution: 24MP (selectable: 4MP, 8MP, 16MP, 20MP)
• Video Recording: 720P
• Trigger Speed: Fast 0.5-second
• Photo Burst Mode: 1-3 photos per trigger
• Detection & Flash Range: 80ft
• Time-Out Delay: Customizable 2-59 seconds or 1-59 minutes
• Connectivity: Dual network AT&T and Verizon carrier with pre-installed SIM cards. Compatible with Command PRO App.

Figure 4.1: Key performance specifications. This graphic highlights the camera's 24MP resolution, 80ft detection range, sub-0.5 second trigger speed, and 80ft flash range.

4.2 Using the Command PRO App

The Command PRO App allows for convenient control and monitoring of your camera.

• Download the Command PRO App from your smartphone's app store.
• Register your camera using the app.
• Access features such as:
  • Photo and Video On Demand
  • Adjusting camera settings remotely
  • Viewing captured images and videos
  • Monitoring battery life and signal strength

Figure 4.2: Advanced camera functionalities. This image details the camera's detection and IR range, burst mode capabilities, recovery time, trigger speed, photo resolution, and the "On Demand" photo feature.

4.3 Capturing Images and Videos

The camera is designed to automatically capture images and videos when motion is detected within its 80ft range.

• Motion Detection: The passive infrared (PIR) sensor detects heat and motion, triggering the camera.
• Night Vision: Integrated infrared LEDs provide illumination for clear images and videos in low-light conditions without startling wildlife.
• On Demand: Use the Command PRO App to request a photo or video capture in real-time.

Figure 4.3: Sample image captured by a Muddy trail camera. This image shows a deer in a field, demonstrating the camera's ability to capture wildlife.

5. Maintenance

5.1 Battery Replacement

Monitor battery levels via the Command PRO App. Replace all 16 AA batteries when levels are low to ensure continuous operation. For extended power, a 12V DC auxiliary jack is available for external power packs (sold separately).

5.2 SD Card Management

Regularly check the SD card capacity. Format the SD card periodically to maintain optimal performance and prevent data corruption. Always power off the camera before removing or inserting an SD card.

5.3 Cleaning

Wipe the camera lens and housing with a soft, dry cloth to remove dirt, dust, or moisture. Do not use abrasive cleaners or solvents. Ensure the camera is dry before closing the housing.

6. Troubleshooting

7. Specifications

• Model: Mitigator 2.0 (MUD-MTGTRK)
• Photo Resolution: 24MP (selectable 4MP, 8MP, 16MP, 20MP)
• Video Resolution: 720P
• Trigger Speed: 0.5 seconds
• Detection Range: 80ft
• Flash Range: 80ft
• Power Source: 16 AA batteries (included), 12V DC auxiliary jack compatible
• Connectivity: Cellular (Dual network AT&T/Verizon), Wireless
• Compatible Devices: Smartphone (via Command PRO App)
• Mounting Type: Integrated Multi-position Mount, ¼-20 Threaded Insert
• Special Features: HD Resolution, Motion Sensor, Night Vision, Weather Proof, Photo & Video On Demand
• Dimensions: 7.48 x 5.51 x 3.15 inches
• Weight: 1.37 pounds
• UPC: 813628069409

8. Warranty and Support

For warranty information and technical support, please refer to the official MUDDY website or contact their customer service department. Keep your purchase receipt as proof of purchase.

Manufacturer: GSM Outdoors

Online Resources: Visit the MUDDY Store on Amazon for additional product information and accessories.