1. Introduction
Thank you for choosing the Bomann WAT 7186 Washing Machine Dryer. This appliance combines washing and drying functions in a single unit, offering convenience and space-saving benefits. With an 8 kg washing capacity and a 5 kg drying capacity, it is designed for efficient laundry care. This manual provides essential information for safe installation, operation, and maintenance of your new appliance.
Key Features:
- 2-in-1 Wash and Dry: Single-pass operation for convenience.
- Capacity: 8 kg washing, 5 kg wash and dry in one pass.
- Inverter Motor: Efficient, quiet, and durable operation with a maximum spin speed of 1400 RPM.
- Steam Function: For wrinkle reduction and easier ironing.
- Time Management: Remaining time indicator and 1-24 hour time preset.

Image 1.1: The Bomann WAT 7186 appliance highlighting its 2-in-1 wash and dry capability, with separate capacities for washing (8 kg) and combined wash and dry (5 kg).
2. Safety Instructions
Read all instructions carefully before using the appliance. Keep this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or damage to the appliance.
General Safety:
- Ensure the appliance is properly grounded.
- Do not allow children to play with or operate the appliance.
- Keep packaging materials out of reach of children.
- Do not install or store the appliance where it will be exposed to temperatures below freezing or weather conditions.
- Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances.
- Always unplug the appliance before cleaning or performing maintenance.
Technical Safety Features:
- Water Overflow Protection: Prevents water leakage.
- Overheating Protection: Safeguards internal components.
- Unbalance Control: Ensures stable operation during spin cycles.
- Child Lock: Prevents accidental program changes by children.

Image 2.1: Overview of the technical safety features integrated into the Bomann WAT 7186, including water overflow protection, overheating protection, unbalance control, and child lock for enhanced user safety.
3. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your appliance. It is recommended to have the appliance installed by a qualified technician.
Unpacking:
- Carefully remove all packaging materials.
- Remove all transit bolts from the rear of the machine. Keep them for future transport.
- Check for any damage during transit. Contact your retailer immediately if damage is found.
Location:
- Place the appliance on a firm, level floor.
- Ensure adequate ventilation around the machine.
- Avoid direct sunlight or heat sources.
Water Connection:
- Connect the supplied inlet hose (with safety system) to a cold water tap with a 3/4 inch thread.
- Ensure all connections are tight to prevent leaks.
- The minimum inlet pressure required is 1 bar.
- Position the drain hose into a standpipe or over the edge of a sink, ensuring it is securely fixed to prevent displacement during operation.
Electrical Connection:
- Connect the appliance to a grounded power outlet.
- Ensure the voltage (230 Volts) and amperage (10 Amps) match your household supply.
- Do not use extension cords or adapters.

Image 3.1: This image illustrates the dimensions of the Bomann WAT 7186 (54 cm depth, 60 cm width, 85 cm height) and includes the energy efficiency label, providing crucial information for installation planning and energy consumption.
4. Operating Instructions
This section guides you through the daily use of your Bomann WAT 7186 washing machine dryer.
Control Panel Overview:
The appliance features a central knob for program selection and a digital display with touch buttons for additional settings like temperature, spin speed, options, drying level, and time preset.

Image 4.1: A close-up of the Bomann WAT 7186 control panel, displaying the digital timer, program selection knob, and various function buttons, including the 1-24 hour time preset option.
Loading Laundry:
- Open the door and load laundry, ensuring not to overload the drum.
- For washing only, the maximum capacity is 8 kg. For combined wash and dry cycles, the maximum capacity is 5 kg.
- Add detergent to the dispenser drawer.
Program Selection:
Turn the program selection knob to choose one of the 15 available washing/drying programs. The display will show the default settings for the selected program.

Image 4.2: This image highlights the steam function of the Bomann WAT 7186, designed for wrinkle-free laundry, and indicates the availability of 15 distinct wash programs to suit various fabric types and cleaning needs.
Adjusting Settings:
- Temperature: Press the 'Temperature' button to adjust the wash temperature (e.g., cold, 20°C, 30°C, 40°C, 60°C, 90°C).
- Spin Speed: Press the 'Spin' button to change the spin speed (up to 1400 RPM).
- Drying Level: For drying programs, select the desired drying level (e.g., cupboard dry, iron dry).
- Steam Function: Activate the steam function for certain programs to reduce wrinkles.
- Time Preset (Delay Start): Use the 'Time Preset' button to delay the start of a program by 1 to 24 hours.
Starting a Program:
Press the 'Start/Pause' button to begin the selected program. The remaining time will be displayed.
Inverter Motor Benefits:

Image 4.3: This image emphasizes the efficient, quiet, and durable inverter motor of the Bomann WAT 7186, contributing to economical operation and strong performance with 1400 RPM spin speed.
The inverter motor in your Bomann WAT 7186 provides several advantages:
- Energy Efficiency: Consumes less energy compared to conventional motors.
- Quiet Operation: Reduces noise levels during cycles.
- Durability: Designed for a longer lifespan due to fewer moving parts and reduced friction.
- Precise Control: Allows for more precise control over drum movements, optimizing wash and dry performance.
5. Maintenance and Care
Regular cleaning and maintenance will ensure the longevity and optimal performance of your appliance.
Cleaning the Exterior:
- Wipe the exterior with a soft, damp cloth.
- Do not use abrasive cleaners or solvents.
Cleaning the Detergent Dispenser:
- Remove the dispenser drawer and rinse it under running water.
- Clean any detergent residue from the compartments.
Cleaning the Drum:
- Run a maintenance wash cycle (e.g., a hot wash with no laundry and a descaling agent) periodically to prevent odors and limescale buildup.
Cleaning the Drain Filter:
- Locate the drain filter at the bottom front of the machine.
- Place a shallow container underneath to catch any residual water.
- Carefully unscrew and remove the filter.
- Clean any lint, debris, or foreign objects from the filter and its housing.
- Screw the filter back in securely.
6. Troubleshooting
Before contacting customer service, please refer to the following table for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not start | No power supply; Door not closed properly; Program not selected; Start/Pause button not pressed. | Check power plug and fuse; Close the door firmly; Select a program; Press Start/Pause. |
| Water not filling | Water tap closed; Inlet hose kinked or blocked; Water pressure too low. | Open water tap; Straighten hose or clean filter; Check household water pressure. |
| Water not draining | Drain hose kinked or blocked; Drain filter blocked. | Straighten hose or clear blockage; Clean the drain filter. |
| Excessive vibration/noise | Transit bolts not removed; Appliance not level; Laundry unbalanced. | Remove transit bolts; Adjust leveling feet; Redistribute laundry in the drum. |
| Drying performance poor | Overloaded drum; Selected drying level too low. | Reduce laundry load; Select a higher drying level. |
7. Technical Specifications
Detailed technical information for the Bomann WAT 7186.
| Specification | Value |
|---|---|
| Model Number | 771860 (WAT 7186) |
| Brand | Bomann |
| Colour | Titanium |
| Washing Capacity | 8 Kilograms |
| Wash and Dry Capacity | 5 Kilograms |
| Maximum Spin Speed | 1400 RPM |
| Product Dimensions (D x W x H) | 56D x 64.5W x 88.5H Centimetres |
| Item Weight | 62 Kilograms |
| Voltage | 230 Volts |
| Amperage | 10 Amps |
| Wattage | 1750 Watts |
| Annual Energy Consumption (Washing) | 47 kWh per 100 cycles |
| Annual Energy Consumption (Wash & Dry) | 266 kWh per 100 cycles |
| Number of Washing/Drying Cycles | 15 |
| Drum Material | Stainless Steel |
| Access Location | Front Load |
| Controller Type | Knob |
| Inlet Minimum Pressure | 1 Bars |
| Included Components | Inlet Hose Safety System, Manual, Washer-dryer |

Image 7.1: The EU Energy Label for the Bomann WAT 7186, detailing energy consumption for washing and combined wash/dry cycles, water consumption, and noise levels. For more details, scan the QR code or visit eprel.ec.europa.eu/qr/2183385.
8. Warranty and Support
Your Bomann WAT 7186 Washing Machine Dryer comes with a manufacturer's warranty.
Warranty Information:
- EU Spare Part Availability Duration: 2 Years.
- Please retain your proof of purchase for warranty claims.
Customer Support:
For technical assistance, spare parts, or warranty inquiries, please contact Bomann customer service. Refer to the contact information provided in your purchase documentation or on the official Bomann website.





