1. Important Safety Instructions

Please read all instructions carefully before using your iBELL NUTRIMAX500X Nutri Blender. Retain this manual for future reference.

• Always ensure the blender is unplugged from the power outlet before assembling, disassembling, or cleaning.
• Do not immerse the motor base in water or any other liquid. Clean with a damp cloth only.
• Keep hands and utensils out of the blending jar while operating to prevent personal injury and damage to the blender.
• Never blend hot liquids in sealed containers as pressure buildup can cause the container to burst and result in injury.
• Ensure the jar is securely fitted onto the motor base before operating the blender. The product will only switch on when the jar is correctly locked into place.
• Do not operate the blender with damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

2. Product Components

The iBELL NUTRIMAX500X Nutri Blender comes with the following components:

• Motor Base (Blender Head)
• 3 x 500ml Jars
• 2 x 300ml Jars
• 2 x Stainless Steel Blades (Flat Blade and Cross Blade)
• Lids
• Sipper Caps
• Warranty Card

Image: The iBELL NUTRIMAX500X Nutri Blender system, showcasing the motor base, various jars, blades, and sipper caps.

Image: Detailed view of the blender's internal motor components, highlighting the 24000 RPM pure copper motor, 600W power, 3 modes, and the two types of stainless steel blades (Flat Blade and Cross Blade).

3. Setup and Assembly

Follow these steps to correctly assemble your iBELL NUTRIMAX500X Nutri Blender:

1. Prepare Ingredients: Add your desired ingredients and liquids into one of the blending cups. Do not overfill the cup beyond the maximum fill line.
2. Attach Blade: Select the appropriate extractor blade (Flat or Cross) and securely twist it onto the open end of the cup until it is tightly sealed.
3. Place on Motor Base: Invert the assembled cup and blade, then place it onto the motor base.
4. Lock into Place: Gently push down on the cup and turn it clockwise until it locks securely into the motor base. The blender will not operate unless the cup is properly locked.
5. Connect Power: Plug the power cord into a suitable electrical outlet.

Image: Visual guide demonstrating the four easy steps to operate the blender: adding ingredients, attaching the blade, placing the cup on the motor base, and locking it into position.

4. Operating Instructions

Your iBELL NUTRIMAX500X Nutri Blender features a powerful 600-watt motor and three operational modes for versatile blending.

4.1 Blending Process

1. Ensure the blender is properly assembled and locked as described in the 'Setup and Assembly' section.
2. Turn the control knob to your desired setting:
   • 'P' (Pulse): For short bursts of power, ideal for chopping or breaking down tougher ingredients. The blender operates only while the knob is held in this position.
   • '0' (Off): The blender is off.
   • '1' (Low Speed): For lighter blending tasks and softer ingredients.
   • '2' (High Speed): For thorough blending, liquefying, and harder ingredients.
3. Blend until desired consistency is achieved. Avoid continuous operation for more than 60 seconds to prevent motor overheating. Allow the motor to rest for a few minutes between cycles if blending for extended periods.
4. Once blending is complete, turn the knob to the '0' (Off) position and unplug the appliance.
5. Unlock the cup by turning it counter-clockwise and lift it from the motor base.
6. Carefully remove the blade assembly from the cup and attach a lid or sipper cap for immediate consumption or storage.

4.2 Recommended Uses

This Nutri Blender is suitable for preparing a variety of items:

• Smoothies
• Milk Shakes
• Fruit Juices
• Vegetable Juices
• Sauces
• Baby Food

Image: The iBELL NUTRIMAX500X Nutri Blender displayed alongside examples of its versatile applications, including smoothies, milkshakes, fruit juices, vegetable juices, sauces, and baby food.

Image: Close-up views of key features: the safety lock mechanism ensuring operation only when locked, the simple knob for mode selection, the convenient sipper cap for portability, and the anti-slip pads for stability during use.

5. Maintenance and Cleaning

Proper maintenance ensures the longevity and optimal performance of your iBELL NUTRIMAX500X Nutri Blender.

5.1 Cleaning the Jars and Blades

1. Immediately after use, rinse the jars and blades under running water to prevent food from drying on them.
2. For thorough cleaning, fill the jar with warm water and a drop of dish soap. Attach the blade assembly and place it on the motor base. Run the blender on '1' for a few seconds.
3. Disassemble and rinse all parts thoroughly. Use a brush to clean around the blades carefully.
4. All removable parts (jars, blades, lids, sipper caps) are top-rack dishwasher safe, or can be washed by hand with warm, soapy water.
5. Allow all parts to air dry completely before storing.

5.2 Cleaning the Motor Base

• Ensure the motor base is unplugged before cleaning.
• Wipe the motor base with a damp cloth. Do not immerse it in water or any other liquid.
• Do not use abrasive cleaners or scouring pads, as they may scratch the surface.

6. Troubleshooting

If you encounter issues with your iBELL NUTRIMAX500X Nutri Blender, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support.

7. Specifications

Detailed specifications for the iBELL NUTRIMAX500X Nutri Blender:

• Brand: IBELL
• Model: NUTRIMAX500X
• Power: 600 Watts
• Motor Speed: 24000 RPM
• Motor Type: 100% Copper Motor
• Jars Included: 5 Jars (3 x 500ml, 2 x 300ml)
• Blades: 2 Stainless Steel Blades (Flat Blade, Cross Blade)
• Operational Modes: 3 (Pulse, Low, High)
• Controls Type: Knob
• Special Features: Safety Lock, Sipper Cap, Anti-slip Pad, Silicon Feet for Better Grip
• Product Dimensions: 11.5D x 11.5W x 16.8H Centimeters
• Item Weight: 1 kg 800 g
• Country of Origin: China
• Manufacturer: Innovative Technologies

Image: A visual representation of the iBELL NUTRIMAX500X Nutri Blender with its key dimensions: 11.5 cm width and 16.8 cm height.

8. Warranty and Support

Your iBELL NUTRIMAX500X Nutri Blender comes with comprehensive warranty coverage and dedicated customer support.

8.1 Warranty Information

The product includes a 1-Year Standard Warranty. Additionally, you can receive a 1-Year Additional Warranty upon free registration. Registration must be completed within 30 days from the date of delivery to avail the extended warranty.

Image: The iBELL NUTRIMAX500X Nutri Blender displayed with a badge indicating a 2-year warranty, comprising a 1-year standard warranty and an additional 1-year warranty upon registration.

8.2 Customer Support

For any queries, assistance, or warranty claims, please contact:

• Phone: 1800 2020 260
• Email: connect@ibellstore.com

Manufacturer/Importer: Innovative Technologies, Fida's Building, Thottumugham P.O, Aluva, Kerala - 683105