Festool OF 1010 REBQ-Set Router and Accessory Kit User Manual

Introduction

The Festool OF 1010 REBQ-Set Router is engineered for precision and versatility in woodworking applications. Its design features a double-sided column clamp for exceptional torsional rigidity and a tool-free adjustable parallel edge guide for accurate adjustments. An integrated LED light ring illuminates the workpiece, ensuring clear visibility for precise routing. This manual provides essential information for the safe and effective use of your router and its accessory kit.

Safety Instructions

WARNING: This product can expose you to chemicals including wood dust, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

Always observe general power tool safety guidelines. Wear appropriate personal protective equipment, including eye protection, hearing protection, and a dust mask. Ensure the workpiece is securely clamped before operation. Disconnect the power supply before changing bits, making adjustments, or performing maintenance. Keep the work area clean and well-lit. Do not operate the tool in damp or wet conditions.

Package Contents

The Festool OF 1010 REBQ-Set Router and Accessory Kit includes the following components:

• OF 1010 R Router
• 1/4-inch (6.35mm) Clamping Collet
• 5/16-inch (8mm) Clamping Collet
• Accessory Kit ZS-OF 1010 I (Item No. 578046)
• Collet Wrench WAF 19
• Light Module LM-OF 1010 R
• Parallel Edge Guide with fine adjuster SA-OF 1010/MFK
• Plug-it Power Cord (4m)
• Systainer SYS3 M 237 (Storage Container)

Image: The Festool OF 1010 REBQ-Set Router and its comprehensive accessory kit, neatly organized in Systainer storage boxes.

Setup

1. Installing the Collet and Router Bit

1. Ensure the router is unplugged from the power source.
2. Select the appropriate collet (1/4-inch or 5/16-inch) for your router bit.
3. Insert the collet into the spindle.
4. Insert the router bit into the collet, ensuring it is seated correctly.
5. Tighten the collet nut firmly using the provided collet wrench.

2. Attaching the Light Module

The Light Module LM-OF 1010 R can be easily attached to the router base to provide shadow-free illumination of the workpiece.

3. Connecting Dust Extraction

For a cleaner work environment and improved visibility, connect a D 27 or D 36 diameter dust extraction hose to the integrated chip extraction system on the router base.

Image: A detailed view of the Festool OF 1010 REBQ Router, highlighting its robust construction and depth adjustment mechanism.

Operating Instructions

1. Adjusting Routing Depth

The routing depth can be precisely adjusted to an accuracy of 1/256" (1/10 mm). Use the depth adjustment mechanism to set the desired depth for your application.

2. Using the Parallel Edge Guide

The parallel edge guide with fine adjuster (SA-OF 1010/MFK) allows for quick and precise adjustments. Its central clamp and tool-free adjustable fence pieces ensure stable and accurate routing along an edge.

Image: The Festool OF 1010 REBQ Router equipped with the parallel edge guide and connected to a dust extraction hose for efficient chip removal.

3. Powering On and Off

The router features MMC electronics for optimal work and temperature monitoring, as well as restart protection. To start, ensure the router is securely held and the bit is clear of the workpiece. Press the power switch. To stop, release the power switch.

Image: A user demonstrating the Festool OF 1010 REBQ Router in operation, with the integrated LED light ring illuminating the routing area for enhanced visibility.

4. Routing Techniques

Always feed the router into the material in the correct direction to prevent kickback. For best results, make multiple shallow passes rather than one deep pass, especially with harder materials. Utilize guide rails or templates for straight and curved cuts.

Image: A user precisely routing along a guide rail, showcasing the router's capability for accurate and controlled cuts.

Image: A close-up view from below, showing a user routing the edge of a wooden panel, demonstrating the router's versatility for various edge profiles.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your Festool router.

• Cleaning: After each use, disconnect the router from power and clean off any dust and debris from the housing, base, and collet area. Use compressed air for hard-to-reach spots.
• Collet Care: Periodically inspect the collet and collet nut for wear or damage. Replace if necessary to ensure proper bit gripping.
• Power Cord: Inspect the power cord for any signs of damage. Do not use the tool if the cord is damaged.
• General Inspection: Regularly check all screws and fasteners for tightness. Ensure all moving parts operate smoothly.

Troubleshooting

If you encounter issues with your Festool OF 1010 REBQ-Set Router, refer to the following common troubleshooting tips:

• Router does not start: Check if the power cord is securely plugged into a functional outlet. Verify that the power switch is in the 'on' position. The tool has restart protection, ensure it has not been triggered by a power interruption.
• Excessive vibration: Ensure the router bit is correctly installed and tightened in the collet. Check the bit for damage or dullness.
• Poor cut quality: Inspect the router bit for sharpness and damage. Ensure the routing depth is set correctly and the workpiece is stable. Adjust feed rate.
• Dust extraction ineffective: Check that the dust extraction hose is properly connected and not clogged. Ensure the dust extractor is turned on and functioning.

For persistent issues, contact Festool customer support.

Specifications

Warranty and Support

Festool offers comprehensive support for its products. This includes a 30-day money-back guarantee and a 3-year satisfaction guarantee. For detailed warranty information, product registration, or technical assistance, please visit the official Festool website or contact their customer service department.

You can find more information and support resources at the Festool Store on Amazon.