1. Introduction
This manual provides essential information for the safe and effective use of your Ulike Air 3 Deluxe IPL Hair Removal Device. Please read it thoroughly before first use and keep it for future reference.
2. Safety Information and Important Warnings
Important: Pulsed light is not effective on light blonde, red, gray, or white hair, nor on very dark skin. Do not use if you are under 18 or over 65 years old, if you are pregnant or breastfeeding, or on tattooed or made-up areas. Always read the full manual before use.
Always wear the provided protective glasses during treatment sessions to protect your eyes from the intense pulsed light.
The device features an advanced sapphire cooling system to maintain a skin contact temperature below 18°C, minimizing discomfort. However, if you experience any burning sensation or discomfort, discontinue use immediately.
3. Package Contents
The Ulike Air 3 Deluxe kit includes the following items:
- 1 x Wired IPL Device
- 1 x Pair of Protective Glasses
- 1 x Razor
- 1 x UV Sterilizer
- 2 x Aloe Vera Gels
- 1 x Storage Box
4. Product Features
- Full-Spectrum IPL Technology: 550–1200 nm wavelength targets superficial, intermediate, and deep hairs.
- Sapphire Ice Cooling System: Maintains skin contact temperature below 18°C for a nearly painless experience.
- 3 All-in-One Modes:
- Soft Mode: For sensitive areas like the face.
- Body Mode: For larger areas like legs and arms.
- Power Mode: For stubborn hair in areas like the bikini line and underarms.
- Automatic Continuous Flash (Auto-Glide Mode): Allows for fast and smooth treatment, completing a full body session in approximately 12-13 minutes.
- Lightweight and Ergonomic Design: Weighs 271g for comfortable handling.
5. Setup
- Unpack: Carefully remove all components from the storage box.
- Inspect: Check the device and accessories for any signs of damage. Do not use if damaged.
- Connect Power: Plug the wired IPL device into a suitable power outlet.
6. Operating Instructions
6.1. Skin and Hair Suitability
The Ulike Air 3 Deluxe IPL device is most effective on certain skin tones and hair colors. Refer to the chart below to determine if this device is suitable for you.
6.2. Pre-Treatment Steps
- Clean Skin: Ensure the treatment area is clean, dry, and free from any lotions, creams, or deodorants.
- Shave: Shave the hair in the treatment area before each IPL session. This allows the light energy to reach the hair follicle directly.
6.3. Device Operation
- Wear Protective Glasses: Always wear the provided IPL protective glasses throughout the entire session to protect your eyes.
- Power On and Select Level: Plug in the device, press the power button to turn it on, and select your desired intensity level. Start with a lower level and gradually increase if comfortable.
- Begin Treatment: Place the light window firmly against your skin at a 90-degree angle. Press the treatment button to emit a flash. For continuous treatment, long-press the treatment button to activate Auto-Glide mode, which automatically flashes every 0.7 seconds.
6.4. Recommended Treatment Schedule
For optimal results, follow the recommended 12-week treatment cycle:
- Weeks 1-4 (Active Growth Phase): 3 sessions per week.
- Weeks 5-8 (Transition Phase): 2 sessions per week.
- Weeks 9-12 (Maintenance Phase): 1 session every 14 days (1-2 sessions per month).
Visible hair reduction can be observed in as little as 3 weeks. Individual results may vary.
6.5. Post-Treatment Care
After each session, apply the provided Aloe Vera gel to soothe and hydrate the treated skin.
7. Maintenance
7.1. Cleaning the Device
After each use, ensure the device is unplugged and cool. Wipe the light window with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
7.2. UV Sterilizer Usage
The included UV sterilizer eliminates 99.9% of bacteria in 10 minutes, ensuring hygiene for your device.
- Step 1: Open the sterilizer lid and place the IPL device inside with the head facing left.
- Step 2: Close the lid. The indicator light will illuminate, signaling that sterilization is in progress.
- Step 3: The device will automatically shut off once the process is complete.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Not properly plugged in; power button not pressed correctly. | Ensure the device is securely plugged into a working power outlet. Press and hold the power button for a few seconds. |
| No flash emitted. | Light window not in full contact with skin; device malfunction. | Ensure the light window is fully pressed against the skin. If the issue persists, contact customer support. |
| Skin feels too warm or uncomfortable. | Intensity level too high for your skin sensitivity. | Reduce the intensity level. Ensure the sapphire cooling system is functioning (you should feel a cool sensation). |
| No visible results after several weeks. | Inconsistent use; unsuitable hair/skin type; incorrect technique. | Review the treatment schedule and ensure consistent use. Verify your skin and hair type against the suitability chart. Ensure the device is used correctly as per instructions. |
9. Specifications
- Model Number: UI06D
- Brand: Ulike
- Product Dimensions (L x W x H): 17.9 x 5.8 x 3.4 cm
- Weight: 271 grams (as per product features description). The specification data lists 3.4 kilograms, which appears to be an error.
- Country of Origin: China
- Manufacturer: Shenzhen Ulike Smart Electronics Co., Ltd
- ASIN: B0DVCD1NYD
- Guaranteed Software Updates Until: Information not available
10. Warranty and Support
Ulike offers a 100-day trial period and 5-year after-sales service for this product. For any questions, technical assistance, or warranty claims, please contact Ulike customer support through their official channels or the retailer where the product was purchased.
Please retain your proof of purchase for warranty purposes.
