1. Introduction to the INNOKIN Arcfire Vape Kit
The INNOKIN Arcfire Vape Kit is designed for effortless and satisfying vaping. Featuring a sleek, precision-machined design with magnetic snap-in pods and a user-friendly one-button operation, it is suitable for both beginners and experienced users. The Arcfire delivers smooth, flavourful Mouth-to-Lung (MTL) hits, powered by fast-heating mesh coils. Its 650mAh battery with an intuitive LED indicator ensures reliable performance throughout your day. The device is refillable and rechargeable, offering a convenient and stylish vaping solution.
Image 1.1: The INNOKIN Arcfire Vape Kit, showcasing its sleek design in Ocean Horizon.
2. Package Contents
Please verify that all items are present in your INNOKIN Arcfire Vape Kit package:
- 1 x INNOKIN Arcfire Device
- 1 x INNOKIN Arcfire 1.2 Ohm Refillable Pod (pre-installed or included separately)
- 1 x USB-C Charging Cable
- 1 x User Manual (this document)
Image 2.1: Overview of Arcfire features, highlighting the 650mAh battery and Arc-Coil Mesh.
3. Setup Guide
3.1. Initial Charging
Before first use, fully charge your Arcfire device. Connect the provided USB-C charging cable to the charging port located at the bottom of the device and plug the other end into a suitable USB power source (e.g., computer USB port, wall adapter). The LED indicator will show charging status.
- Charging Indicator: The LED indicator lights will illuminate progressively as the device charges.
- Full Charge: All LED lights will remain solid when charging is complete.
- The Arcfire supports quick charging, reaching approximately 75% battery capacity in just 30 minutes.
Image 3.1: Visual representation of the Arcfire's three-stage battery indicator system.
3.2. Filling the Pod
The Arcfire uses refillable pods with a convenient side-fill port. Ensure the pod is detached from the device before filling.
- Remove the pod from the Arcfire device by gently pulling it upwards.
- Locate the silicone stopper on the side of the pod.
- Carefully lift the silicone stopper to expose the filling port.
- Insert the nozzle of your e-liquid bottle into the filling port and slowly fill the pod. Avoid overfilling.
- Securely close the silicone stopper to prevent leaks.
- For first-time filling or with a new coil, allow the e-liquid to saturate the coil for at least 5 minutes before vaping to prevent dry hits.
The Arcfire is compatible with 50% PG or higher e-liquids, including nic salts and freebase e-liquids.
Image 3.2: Detailed view of the Arcfire pod and its internal coil structure, emphasizing the Arc-Coil technology.
3.3. Inserting the Pod
Once filled, insert the pod back into the Arcfire device. The magnetic connection will securely hold the pod in place.
- Align the filled pod with the pod slot on the device.
- Gently push the pod down until you feel the magnetic connection snap into place.
4. Operating Instructions
4.1. Power On/Off
The Arcfire features a simple one-button operation:
- To Power On: Press the fire button 5 times rapidly. The LED indicator will flash to confirm activation.
- To Power Off: Press the fire button 5 times rapidly. The LED indicator will flash to confirm deactivation.
4.2. Vaping
The Arcfire supports both inhale (auto-draw) and button activation for vaping.
- Inhale Activation: Simply draw on the mouthpiece to activate the device and produce vapor.
- Button Activation: Press and hold the fire button while drawing on the mouthpiece to produce vapor.
Release the button or stop inhaling when you have finished your puff.
4.3. Battery Level Indicator
The LED indicator lights on the device provide a clear indication of the remaining battery life:
- Three Lights: 100% - 65% battery remaining
- Two Lights: 65% - 15% battery remaining
- One Light: Less than 15% battery remaining (recharge soon)
When the battery is critically low, the single light may flash, indicating that charging is required immediately.
5. Maintenance
5.1. Cleaning Your Device
Regular cleaning helps maintain optimal performance and extends the lifespan of your Arcfire kit.
- Device Body: Wipe the device body with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Pod Connection: Periodically clean the magnetic connection points on both the device and the bottom of the pod with a cotton swab lightly dampened with isopropyl alcohol to remove any e-liquid residue or dust. Ensure the area is completely dry before reattaching the pod.
- Charging Port: Keep the USB-C charging port free of debris. Use a dry, soft brush or compressed air if necessary.
5.2. Pod Replacement
The Arcfire pods contain integrated coils that will eventually need replacement. You will notice a decrease in flavor, vapor production, or a burnt taste when the coil is nearing the end of its life.
- To replace a pod, simply pull the old pod out of the device.
- Dispose of the old pod responsibly.
- Insert a new, filled pod into the device as described in Section 3.3.
Image 5.1: Illustration of the various Arcfire pod options, including different resistances and capacities.
5.3. Charging Best Practices
- Always use the provided USB-C cable or a high-quality, compatible cable.
- Avoid charging the device overnight or leaving it unattended for extended periods.
- Charge the device on a clean, non-flammable surface.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No vapor production |
|
|
| Burnt taste |
|
|
| Leaking from pod |
|
|
| Device not charging |
|
|
7. Specifications
| Product Name | INNOKIN Arcfire Vape Kit |
| Battery Capacity | 650mAh (Internal) |
| Pod Capacity | 2ml |
| Coil Type | Integrated Mesh Coil (e.g., 1.2 Ohm) |
| Activation Method | Inhale & Button Activated |
| Charging Port | USB Type-C |
| Dimensions | Approx. 7 x 4 x 2 cm (Package Dimensions) |
| Weight | Approx. 100 g (Package Weight) |
| E-liquid Compatibility | 50% PG or higher (including Nic Salts) |
Image 7.1: The Arcfire device showcasing its sleek design and range of available colors.
8. Warranty and Support
For warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official INNOKIN website. Keep your proof of purchase for any warranty claims.
If you encounter any issues not covered in this manual, please contact INNOKIN customer support through their official channels. Do not attempt to repair the device yourself, as this may void your warranty.
Important Safety Notice: This product is intended for adult smokers and vapers. Keep out of reach of children and pets. If the product is used with nicotine-containing e-liquid, please be aware that nicotine is a highly addictive substance.
